1 / 2

Do You Gras The Distinction in Control Panel & MCC Panel?

A control center (MCC Panel) consists of 1 or additional vertical metal cupboard sections with power bus and provision for plug-in mounting of individual motor controllers.<br>

mayankshah
Download Presentation

Do You Gras The Distinction in Control Panel & MCC Panel?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Do You Gras The Distinction in Control Panel & MCC Panel? An electrical panel (also called a panel board, breaker panel, or electrical control panel) could be an element of AN electrical provide system that divides MCC control centers. Pagan wattage feed into subsidiary circuits. Industrial management panels coated by UL product class NTW are factory-wired assemblies of commercial control instrumentation, like motor controllers, switches, relays and auxiliary devices. These panels can also embody a method to disconnect and protecting motor branch-circuit devices like the branch circuit, contact and ground fault protection. The panel will be a programmable logic controller (PLC) that's a data processor, a distributed system (DCS), a relay system or alternative sort. It delivers a digital signal to the MCC panel to start out the motor. A control center (MCC Panel) consists of 1 or additional vertical metal cupboard sections with power bus and provision for plug-in mounting of individual motor controllers. Very massive controllers are also fastened in the site however smaller controllers are unplugged from the cupboard for testing or maintenance. Each motor controller contains a contractor or a solid-state motor controller, overload relays to guard the motor and fuses or an electrical fuse to produce short-circuit protection, and a disconnecting switch to isolate the motor circuit. Three-phase power enters every controller through divisible connectors. The motor is wired to

  2. terminals within the controller. Control centers offer wire ways that for field control, and power cables. A PCC will embody variable frequency drives (VFDs), programmable controllers, and metering and should even be the electrical servant's entrance for the building. Motor control centers are employed in the works assembly of many motor starters. A control center consists of feeders for motors and blowers. Feeders are designed per the motor rating. They are employed in several industrial and industrial applications. Processes that are dirty or corrosive could have the MCC put in an exceedingly separate pool area. Usually, the MCC is put in on the works floor adjacent to the machinery it's dominant.

More Related