1 / 16

Precision AG in Hay Production

Precision AG in Hay Production. By: Jared Yost. History. Hay production started in the early 1800’s They cut hay by hand using sickles Not until the 1860’s, reapers and binders where being developed. Stationary balers came out to farmers in the early 1870’s

mauli
Download Presentation

Precision AG in Hay Production

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Precision AG in Hay Production By: Jared Yost

  2. History • Hay production started in the early 1800’s • They cut hay by hand using sickles • Not until the 1860’s, reapers and binders where being developed

  3. Stationary balers came out to farmers in the early 1870’s • In the 1936 the automatic round baler was invented • Both square baler and round baler were used in most areas by the 1940’s

  4. Objectives in Hay Production • Increase productivity • Reduce fuel cost • Reduce labor cost • Software Equipment • Hardware Equipment

  5. RFID • Radio Frequency Identification Device • Date • Time • Moisture content • Weight • Producer uses hand-held scanners to to read tags that are attached the bale

  6. Trimble started in 2010 with ThingMagic • Suppliers • AGCO • New Holland • Case IH

  7. Small Square Balers • Bale Baron • Bale Bandit http://youtu.be/RSR8iHrr3TU http://youtu.be/A7zl5Y_f2oM

  8. Bale Bandit • Metal Bands cost $1.26 per bundle of 21 bales • Can handle 21 to 18 bale bundles, with length being from 37” to 42’’ • Small bales bring a higher price per ton than the big squares or round bales

  9. Bale Baron • Plastic Twine • 25.00 for a 9000 ft roll = .016 per bundle • Also weaker than metal bands • Smart Solve - Computer Control System • The Smart/Solve system runs using a PLC that constantly monitors and warns the operator when needed.

  10. W. R. Long Grapalator • Handles from 1 to 10 bales. • Will work with bales from 34" to 42" long. • The Grapalator weight is 780 lbs. • Rails can be removed and be stored on unit. • http://youtu.be/elYZs-OfoH4

  11. Problems • Metal bands can break if the ground isn’t smooth with the Bale Bandit • Sometimes wont keep the bundle tight • Cost more for short term use • Have to bale many acres to pay off • Have to have a skid steer for the Grapalator

  12. Cost • Hire out • .85 cents/bale using a Hay Wagon • Cost: 5000 bale x .85/ bale = $4250 • Revenue: $8/bale x 5000 bale = $40,000 • Profit: Immediately • Takes more time • Need workers

  13. Small Square Bundles (7x3) • Cost: Bale Bandit = $50,000 New Bale Baron = $53,000 New Grappler = $5,500 New Skidsteer = $15,000 to $45,000 • Revenue: $120/bundle x 238 bundles = $40,000 Note: $300 for metal banding • Profit: 1 or 2 years, but save time and requires no help

  14. Questions?

More Related