1 / 14

Rock Chute Mike Cox State Conservation Engineer

Rock Chute Mike Cox State Conservation Engineer. Contractor Certification Training March 2008. Grade Stabilization Structure (410). Purpose: Stabilize the grade and control erosion in channels. Prevent the formation or advance of gullies.

marvin
Download Presentation

Rock Chute Mike Cox State Conservation Engineer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rock Chute Mike Cox State Conservation Engineer Contractor Certification Training March 2008

  2. Grade Stabilization Structure (410) • Purpose: Stabilize the grade and control erosion in channels. Prevent the formation or advance of gullies. • Rock Chutes are commonly used to control grade in Indiana

  3. Rock Chute-Advantages • Most of the construction can be done with a backhoe or excavator • Economical compared with poured concrete

  4. Rock Chute - Disadvantages • Rock can move during large storms • Hard to find larger rock sizes in certain areas • High overfalls require long chutes • Small rock size increases width and length of chute

  5. Rock Size vs Velocity

  6. What is a d50? • Expressed as D50 size (50% maximum passing by weight)

  7. Example: p1 = 24” p2 = 19.2” D50 = (24” + 19.2”)/8 = 5.4 inches

  8. Bedding • Minimum Thickness = 6” • INDOT Sizes Specified

  9. Geotextile

  10. Riprap Thickness • Minimum of 1’ thickness • Must be 2 times D50 size • Example: • If using D50 Size = 7” Riprap • Minimum Riprap Thickness = 2 * 7” = 14” 2xD50 min.

  11. Installation Report http://www.in.nrcs.usda.gov/technical/engineering/engineering.html

  12. Helping People Help the Land

More Related