1 / 30

PRESENTATION ON SYNCHRONOUS MACHINE MODEL

PRESENTATION ON SYNCHRONOUS MACHINE MODEL. TANDIN JAMTSHO STUDENT #3226091. This presentation shall cover the following topics. Introduction Mathematical model Circuit based model used for both steady state and transient analysis Differential equation model Conclusion

marvel
Download Presentation

PRESENTATION ON SYNCHRONOUS MACHINE MODEL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PRESENTATION ON SYNCHRONOUS MACHINE MODEL TANDIN JAMTSHO STUDENT #3226091

  2. This presentation shall cover the following topics • Introduction • Mathematical model • Circuit based model used for both steady state and transient analysis • Differential equation model • Conclusion • Discussion at the end of presentation

  3. The main component of power system are Generator Transmission Line Step up Transformer Step down Transformer Load

  4. Principle of synchronous machine • Based on the principle of Faraday’s law of electromagnetic induction • Generally the armature winding are located on the stator and field winding on the rotor • The field winding is excited by a direct current

  5. What is mean by synchronous machine ? • A machine that operates at constant speed and frequency with respect to time is called the synchronous machine. • N=120f/P • N=speed of the machine in rev/min • F=frequency in Hz • P=number of poles

  6. Assumptions made are: • The stator windings are sinusoidally distributed electrically • The effect of the stator slots on the variation of any rotor inductances with rotor angle is neglected • Saturation effect neglected.

  7. Mathematical model • Source of the diagram: • Mohamed E. El-Hawary, Electric Power Systems Design and Analysis

  8. By Faraday’s, the voltage induced in the stator coil

  9. InductanceThe self inductance of any stator winding phases are given by The mutual inductance between any two stator phases are given by

  10. Elimination of old variable ia ,ib,ic,by introducing a new variable io • Now I o=1/3(ia+ib+ic )

  11. The new variable for flux linkage

  12. The armature voltage equation in terms of d,q and 0 becomes

  13. Under steady state operation, flux linkage in per unit along d and q axis and the voltage relation can be written as

  14. On open circuit condition id=iq=0 • ed=0 and eq=xadifd • Voltage in the q-axis is due to excitation in the d-axis, lets denote it by E • E= xadifd • ed=xqiq-rid • eq=E-xdid-riq • e=ed+jeq • i=id+jiq • Eq=E-(xd-xq)id • eq=Eq-xdid-riq • eq=jEq-(r+jxq)I • J Eq=e+(r+jxq)i

  15. Steady state Vector diagram F q-axis E D O A B C d-axis

  16. OA=e • OD=current, i • AC=ir drop • CD=jxq • OD=e+(r+jxq)i • DE=j(xd-xq)id • OE=jE=jEq+j(xd-xq)id • If xd=xq, the triangle DEF will vanish for round rotor machine.

  17. Determination of xd, xq and xo • From slip test • Xd=Max. voltage/Min. current • Xq=Min.voltage/Max current • Xd=open ckt. Voltage/Isc • By applying positive sequence current to the armature and measure the voltage for obtaining Xd and xq. • Xo is measured by connecting the three phase winding in series and passing single phase current • Xd will be within the range of 0.6 to 2.2 • Xq will be within the range of 0.4 to 1.4 • X0 will be within the range of 0.01 to 0.25 per unit for all the cases.

  18. I ө Xs + +++ V 0 E δ - - Circuit based models for round rotor and salient pole synchronous machine are • Reactance of air gap flux is represented xo and the leakage flux reactance is represented by xl • Xs= xo+xl

  19. D-axis equivalent circuit i1d id ifd

  20. Q-axis equivalent circuit iq i1q

  21. Transient circuit based model • D-axis equivalent circuit for the sub-transient period

  22. Q-axis equivalent circuit for the sub-transient period

  23. Sub-transient and transient reactance • The idea of transient for a very short period is called Sub-transient, the sub-transient direct and quadrature axis are defined as • Xd’’=∆ d/∆id • Xq’’=∆ q/∆iq • Xd’’=Ll+ (1/(1/Lad+1/Lfd+1/L1d+---)) • Xq’’=Ll+ (1/(1/Laq+1/L1q+---)) • The transient which last for some time around 30 cycles is termed as transient, the transient reactance of direct and quadrature axis are given by • Xd’=Ll+ (1/(1/Lad+1/Lfd)) • Xq’=Ll+ (1/(1/Laq)) • X2=( Xd’’+ Xq’’)/2

  24. Time constants • T’do=Xffd/rfd ( direct axis transient open circuit time constant, 2 to 11 seconds) • T’d=X’d*T’’do/Xd (direct axis transient short circuit time constant • T’’d=X’’d*T’’do/X’d (direct axis sub-transient time constant • T’’do =(x11d-x2f1d/xffd)/r1d (direct axis sub-transient open circuit time constant) • T’’qo=x11q/r1q • T’’q=x’’q*T’’qo/xq • Ta=x2/r (armature short circuit time constant)

  25. Swing equation of synchronous machine • We know that per unit mechanical acceleration equation • p2Θ=(Tm-Te)/H’ • P=d/dt, Θ angle in electrical radians between d-axis and the centre of phase a axis. • H’=inertia constant of machine in per unit (KW-rad/kVA) • Tm=mechanical torque input in per unit • Te =electromagnetic torque developed in per unit • Since Θ is continuously changing with time, it is convenient to measure the angular position w.r.t synchronously rotating reference axis

  26. Swing equation of synchronous machine • Θ=t+δ • the reference axis and the quadrature axis • The equation can be written as δ =angle between • p2 δ =(Tm-Te)/H’ • By expressing angle in degrees and time in seconds it becomes • p2 δ =180fb(Tm-Te)/H’ • Since p.u electrical torque =p.u air gap power developed • p2 δ =180fb(Pm-Pe)/H’

  27. Swing equation of synchronous machine • In literature the quantities involved are expressed in their natural units without the use of per unit notation • p2 δ =(Pm-Pe)/M • M=GH/180fb, G is the rating of the machine in kVA, • H in kW-sec/kVA , Pm and Pe in kW

  28. Conclusion • One can get the idea of basic machine parameters associated with synchronous machine for building models. • After understanding the machine parameters the models used in MATLAB are built. • This can help in choosing the right model for analysing the performance of the synchronous machine. • It will be very useful for those working in power stations.

  29. Reference • Mulukutla S.Sarma, Synchronous Machine (Their Theory, Stability and Excitation Systems). • Charles Concordia, Shycnronous Machines Theory and Performance. • Mohamed E. El-Hawary, Electric Power Systems Design and Analysis • Yao-Nan Yu, Electric Power System Dynamics.

More Related