1 / 67

M. Esteves, G. Nord

M. Esteves, G. Nord. PSEM_2D. A process-based soil erosion model at the plot scale. DYNAS Workshop Rocquencourt 6 th -8 th December 2004. Introduction. PRIM_2D P lot R unoff and I nfiltration M odel (1999) PSEM_2D P lot S oil E rosion M odel (2003) These models were designed

marlee
Download Presentation

M. Esteves, G. Nord

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. M. Esteves, G. Nord PSEM_2D A process-based soil erosion model at the plot scale DYNAS Workshop Rocquencourt 6th-8th December 2004 DYNAS Workshop, 6th-8th December 2004, INRIA

  2. Introduction PRIM_2D Plot Runoff and Infiltration Model (1999) PSEM_2D Plot Soil Erosion Model (2003) These models were designed • to dynamically couple hydrological and soil erosion processes • to predict the spatial pattern of overland flow hydraulics • to predict the spatial pattern of soil erosion • to be used in natural slopes conditions • to consider complex rainfall events The models work on a rainfall event basis PRIM_2D has been validated (Esteves et al., 2000, J. Hyd.,228) PSEM_2D model is still under evaluation (Nord and esteves, WRR, submitted) DYNAS Workshop, 6th-8th December 2004, INRIA

  3. Objectives The main goals are • to improve our understanding of local overland flow hydraulics • to develop a better understanding of soil erosion processes • to bring a better description of the spatial and temporal variability of soil erosion at the plot scale DYNAS Workshop, 6th-8th December 2004, INRIA

  4. Presentation outline • Description of PRIM_2D and PSEM_2D • Applications of PRIM_2D • Validation of the model by comparison with observed data • Effect of the micro-topography • Effect of soil surface features pattern (crusted soils) • Applications of PSEM_2D • Evaluation of the model by comparison with experimental data • Some numerical examples to show the capabilities of the model • As a conclusion: Future research DYNAS Workshop, 6th-8th December 2004, INRIA

  5. Model description DYNAS Workshop, 6th-8th December 2004, INRIA

  6. Model description The model has three major components • Overland flow (OF) is generated as infiltration excess rainfall (hortonian) • OF is routed using the depth averaged two dimensional unsteady flow equations on a finite difference grid • Rainfall and OF hydraulics are used to compute soil erosion A single representative particle size (D50) DYNAS Workshop, 6th-8th December 2004, INRIA

  7. Model description : Infiltration In the case of crusted soils the profile is divided in two layers The infiltration algorithm is based on the Green and Ampt equation (1911) Zf DYNAS Workshop, 6th-8th December 2004, INRIA

  8. Model description : Overland flow • Fully dynamic two dimensional unsteady flow equations (Barré de Saint-Venant) • Continuity equation: • Momentum equations: • g gravitational acceleration (m.s-2) • h flow depth (m) • R rainfall intensity (m s -1) • I rate of infiltration (m s -1) • Sox ground slope (x direction) • Soy ground slope (y direction) • Sfx friction slope (x direction) • Sfy friction slope (y direction) • u flow velocity (x direction) (m s -1) • v flow velocity (y direction) (m s -1) x direction: y direction: DYNAS Workshop, 6th-8th December 2004, INRIA

  9. Model description : Flow resistance • Friction is approximated using the Darcy-Weisbach equation • The Darcy-Weisbach friction factor is constant • For small depth flows (< 0.1 mm) the velocities are calculated using a kinematic wave approximation x direction: • g gravitational acceleration (m.s-2) • h flow depth (m) • Sfx friction slope (x direction) • Sfy friction slope (y direction) • u flow velocity (x direction) (m s -1) • v flow velocity (y direction) (m s -1) • f Darcy-Weisbach friction factor y direction: DYNAS Workshop, 6th-8th December 2004, INRIA

  10. Model description : soil erosion Detachment and re-detachment by raindrop impact Drd > 0 Deposition Dfd < 0 Dfd > 0 Transport by runoff Detachment by runoff Entrainment Tc> qs DYNAS Workshop, 6th-8th December 2004, INRIA

  11. Model description: Soil erosion • A covering Layer of loose sediment (Hairsine and Rose, 1991) • εis conceptualized as the percentage of a grid cell covered by a deposited layer of depth the median particle diameter D50. • Thereforeε is calculated as: DYNAS Workshop, 6th-8th December 2004, INRIA

  12. Model description: Soil erosion • h water depth (m) • c sediment concentration (m3 m-3) • rs sediment particle density (kg m-3) • qx unit runoff discharge (x direction) (m2 s-1 ) • qy unit runoff discharge (y direction) (m2 s-1 ) • Drd soil detachment rate by rainfall (kg m-2 s-1 ) • Dfd soil detachment/deposition rate by runoff (kg m-2 s-1 ) • Sediment mass conservation equation (Bennet,1974) DYNAS Workshop, 6th-8th December 2004, INRIA

  13. Model description: Soil erosion Before sediment movement • Soil detachment by rainfall is a function of the rainfall intensity (Li, 1979) (kg m-2 s -1) a soil detachability coefficient by rainfall (kg m-2 mm-1) p an exponent set to 1.0 according to the results of Sharma et al. [1993] h water depth (m) ld loose sediment depth (m) zm the maximum penetration depth of raindrop splash (m) R rainfall intensity (m s-1) Damping effect of the water film at the soil surface where DYNAS Workshop, 6th-8th December 2004, INRIA

  14. Model description: Soil erosion After sediment movement • Soil detachment by rainfall Detachment (kg m-2 s -1) Re-detachment (kg m-2 s -1) e function of the area of the covering layer (0-1) a soil detachability coefficient by rainfall (kg m-2 mm-1) ad soil re-detachability coefficient by rainfall (kg m-2 mm-1) p an exponent (1.0) h water depth (m) zm the maximum penetration depth of raindrop splash (m) R rainfall intensity (mm h-1) DYNAS Workshop, 6th-8th December 2004, INRIA

  15. Model description: Soil erosion • Soil detachment or deposition by runoff : a model proposed by Foster and Meyer [1972] • When • qs<Tc, additional sediment detachment • qs>Tc, excessive sediment deposition (kg m-2 s-1) Tc sediment transport capacity of the flow (kg m-1 s-1) qs sediment discharge per unit flow width in the flow direction (kg m-1 s-1) DYNAS Workshop, 6th-8th December 2004, INRIA

  16. Model description: Soil erosion • When Tc>qs (Dfd>0) net erosion occurs and the detachment and entrainment rates are given by: Detachment (kg m-2 s -1) Entrainment (kg m-2 s -1) tfis the flow shear stress in the flow direction (Pa) tcis the critical shear stress of a spherical sediment particle [Yang, 1996] (Pa) tsoilthe critical shear stress of the soil (Pa) Kr is the rill erodibility parameter (s m–1) Tc sediment transport capacity of the flow (kg m-1 s-1) qs sediment discharge per unit flow width in the flow direction (kg m-1 s-1) DYNAS Workshop, 6th-8th December 2004, INRIA

  17. Model description: Soil erosion • When Tc<qs (Dfd<0) net deposition occurs and the deposition rates is given by [Foster et al., 1995]: (kg m-2 s -1) j is araindrop induced turbulence coefficient assigned to 0.5. Vf is the particle settling velocity (m s–1) q is the water dicharge per unit flow width in the flow direction (m 3 s-1 m-1) Tc sediment transport capacity of the flow (kg m-1 s-1) qs sediment discharge per unit flow width in the flow direction (kg m-1 s-1) DYNAS Workshop, 6th-8th December 2004, INRIA

  18. Model description: Soil erosion • Flow sediment transport capacity is based on the flow shear stress tf (Foster, 1982) (kg m-1 s-1) h coefficient of efficiency of sediment transport (m0.5 s2 kg –0.5 ) tf flow shear stress acting on the soil particles (Pa) tc critical shear stress of sediment (Pa) k an exponent taken as 1.5 (Finkner et al.,1989) DYNAS Workshop, 6th-8th December 2004, INRIA

  19. Model description: Numerical methods • Hydrological model and erosion model are treated independently since it is assumed that the flow dynamics are not affected by the suspended sediment • The Saint Venant equations are solved using the MacCormack scheme • The mass balance equation for sediment is solved using a second-order centered explicit finite difference scheme • For numerical stability of the scheme and computational efficiency the time step is optimised • Topographic elevations are re-estimated at each time step if there is runoff DYNAS Workshop, 6th-8th December 2004, INRIA

  20. Model description Model description: Numerical methods Flow chart of PSEM_2D To avoid directional bias of the Mac Cormack scheme the order is reversed every time step (predictor-forward, corrector-backward then predictor-backward, corrector-forward). DYNAS Workshop, 6th-8th December 2004, INRIA

  21. Model description: Initial and boundary conditions u = 0 c = c_inward v = 0 h = h _ i n w a r d d u m m y c e l l s u p s l o p e v = 0 i n w a r d b o u n d a r i e s u = 0 u = 0 y d o w n s l o p e • Boundary conditions • In the plot version the boundaries are 3 non porous walls and an open boundary (outlet) • Dummy cells are added to model wall boundary • At the outlet no condition is required because the flow is supercritical • Initial condition • At the beginning of the simulation h(x,y,0) = 0 u(x,y,0) = 0 v(x,y,0) = 0 c(x,y,0) = 0 We consider that rainsplash transportation outside the plot is balanced by sediment coming from the area surrounding the plot. DYNAS Workshop, 6th-8th December 2004, INRIA

  22. Model description : Calibrated parameters Detachment and re-detachment by raindrop impact Drd > 0 Deposition Dfd < 0 a ad Dfd > 0 Transport by runoff Detachment by runoff h tsoil Kr Entrainment Tc> qs hf,f DYNAS Workshop, 6th-8th December 2004, INRIA

  23. Model description: Data • The model needs information on • Slopes and elevations (Digital Elevation Model) • Map of soil surface features distribution • Infiltration parameters (hf, initial WC,Kc,Ks) • Map of DW friction factor • Soil erosion parameters (h,Kr, tsoil, D50) • Map of a and ad, (ad=10 a) • Rainfall (time, intensities) DYNAS Workshop, 6th-8th December 2004, INRIA

  24. Model description: Parameter identfication • The parameter identification is carried out in three stages • We started with parameters estimation based on physical characteristics and published data • Some of soil erosion parameters are defined using data available in the literature (ds=0.047, tsoil is estimated using the WEPP soil database) • Calibration is undertaken for hf (crusted soils) and/or f on one rainfall event • Calibration is undertaken for h,Kr, tsoil using the ranges of values found in the literature WEPP: Water Erosion Prediction Project (US Dept. Agr.) DYNAS Workshop, 6th-8th December 2004, INRIA

  25. Applications of PRIM_2D DYNAS Workshop, 6th-8th December 2004, INRIA

  26. Examples of application PRIM_2D Two runoff plots located on the same hillslope • Homogeneous soil surface feature (ERO) • one type of crust: erosion • Heterogeneous surface feature (JAC) • erosion crust and sandy aeolian micro mounds • Grid resolution 0.25 by 0.25 m • Both plots have the same subsoil • Initial soil water content were obtained from neutron probe measurements • Verification runs DYNAS Workshop, 6th-8th December 2004, INRIA

  27. Examples of application PRIM_2D Homogeneous soil surface feature (ERO) Heterogeneous surface feature (JAC) Runoff plots in Niger (West Africa) DYNAS Workshop, 6th-8th December 2004, INRIA

  28. Examples of application PRIM_2D JAC Sandy mounds Erosion crusts ERO DYNAS Workshop, 6th-8th December 2004, INRIA

  29. PRIM_2D Validation An exemple of validation run DYNAS Workshop, 6th-8th December 2004, INRIA

  30. PRIM_2D Validation DYNAS Workshop, 6th-8th December 2004, INRIA

  31. PRIM_2D Validation DYNAS Workshop, 6th-8th December 2004, INRIA

  32. Plot scale results DYNAS Workshop, 6th-8th December 2004, INRIA

  33. Plot scale results Efficiency ERO : 0.879 Efficiency JAC : 0.913 DYNAS Workshop, 6th-8th December 2004, INRIA

  34. Distributed results Time 789 s (max discharge) JAC JAC Water depth (m) ERO ERO DYNAS Workshop, 6th-8th December 2004, INRIA

  35. Distributed results JAC JAC Time 789 s Shear velocities (m/s) Infiltration depth (m) ERO ERO DYNAS Workshop, 6th-8th December 2004, INRIA

  36. Point results Velocities A small pond Water depth B rill Shear velocities C rill D top Reynolds Rainfall DYNAS Workshop, 6th-8th December 2004, INRIA

  37. Effect of the microtopography The microtopography is represented by • the topographic map of the plot (JAC) • a plane surface with the same mean slope All other parameters are the same DYNAS Workshop, 6th-8th December 2004, INRIA

  38. Effect of the microtopography DYNAS Workshop, 6th-8th December 2004, INRIA

  39. Effect of the microtopography JAC PLAN Distributed results JAC PLAN Time 789 s Water depth (m) DYNAS Workshop, 6th-8th December 2004, INRIA

  40. Effect of the surface features distribution The soil surface features are represented by • the soil surface feature map (JAC) • the dominant surface feature (erosion crust) All the other parameters are the same DYNAS Workshop, 6th-8th December 2004, INRIA

  41. Effect of the surface features distribution DYNAS Workshop, 6th-8th December 2004, INRIA

  42. Effect of the surface features distribution JAC 1 SF JAC 2 SF Time 589 s • For this storm the time to ponding is • 390 s for erosion crust • 625 s for sandy mounds Water depth (m) DYNAS Workshop, 6th-8th December 2004, INRIA

  43. Key results • Even in low relief plots, OF is not a sheet of flowing water, uniform in depth and velocity across the slope. OF concentrates downslope into deeper flow pathways • Small surface feature may play a major role in the OF production from a plot • A good reproduction of discharges at the outlet of a plot does not imply that OF hydraulics is correctly simulated • Infiltration is not homogeneous all over the plot which is partly due to the effect of micro-topography • Large variations in the OF hydraulics are due to the variable rainfall rates and to the characteristics of the uphill areas DYNAS Workshop, 6th-8th December 2004, INRIA

  44. PSEM_2D Evaluation DYNAS Workshop, 6th-8th December 2004, INRIA

  45. Psem_2D Evaluation : Experimental data • Kilinc and Richardson (1973) experimental data • A 1.52 m wide × 4.58 m long flume with an adjustable slope and a rainfall simulator. Each run was one hour long • The flume was filled with compacted sandy soil composed of 90 % sand and 10 % silt and clay. • The soil had a non-uniform size distribution with a median diameter D50of 3.5 × 10-4 m. • The soil surface was levelled and smoothed before each run. DYNAS Workshop, 6th-8th December 2004, INRIA

  46. Psem_2D Evaluation : Experimental data • Kilinc and Richardson (1973) experimental data • The major controlled variables were rainfall intensity and soil surface slope. • Infiltration and erodibility of surface were supposed constant. • Six slopes (5.7, 10, 15, 20, 30, and 40 %) were tested • Four rainfall intensities (32, 57, 93, and 117 mm h-1). • Calibration was carried out using a run with 20 % slope and 93 mm h-1 rainfall intensity. DYNAS Workshop, 6th-8th December 2004, INRIA

  47. Psem_2D Evaluation : Experimental data • Data available • Flow discharge at the outlet of the flume • Mean sediment concentration in the flow at the outlet • Mean infiltration rate • No data were collected on microtopography and Overland flow hydraulics (water depth, velocity) DYNAS Workshop, 6th-8th December 2004, INRIA

  48. Psem_2D Evaluation : Results Rain intensity, 93 mm h-1. Slopes, 15, 20, and 30 % 0.05 Observed, 30 % slope PSEM_2D, 30 % slope 0.04 Govindaraju and Kavvas [1991], 30 % slope Observed, 20 % slope 0.03 PSEM_2D, 20 % slope Sediment discharge (kg/m/s) (CALIBRATED) Govindaraju and Kavvas [1991], 20 % slope 0.02 Observed, 15 % slope PSEM_2D, 15 % slope 0.01 Govindaraju and Kavvas [1991], 15 % slope 0 0 10 20 30 40 50 60 Time (min) DYNAS Workshop, 6th-8th December 2004, INRIA

  49. Psem_2D Evaluation : Results Rain intensity, 117 mm h-1. Slopes, 15, 20, and 30 % DYNAS Workshop, 6th-8th December 2004, INRIA

  50. Psem_2D Evaluation : Results Singer and Walker [1983] experiment Slope 9% D50of the soil: 2. 10-5 m DYNAS Workshop, 6th-8th December 2004, INRIA

More Related