1 / 13

Choosing the Appropriate Control Chart

Choosing the Appropriate Control Chart. (MJ II, p. 37). Attribute (counts) Variable (measurable). The Lean Six Sigma Pocket Toolbook, p. 123. Defect Defective. Different types of control charts. Variables (or measurement ) data.

margo
Download Presentation

Choosing the Appropriate Control Chart

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Choosing the Appropriate Control Chart (MJ II, p. 37) Attribute (counts) Variable (measurable) The Lean Six Sigma Pocket Toolbook, p. 123. Defect Defective

  2. Different types of control charts Variables (or measurement ) data Situation Chart Control Limits Variables data, sets of measurements X-”BAR” CHART Xbar and R Charts R CHART See MJ II p. 42 for constants A2, D3 and D4. Lean Six Sigma Pocket Toolbook, p. 127. source: Brian Joiner, Fourth Generation Management, p. 266-267.

  3. Parameters for Creating X-bar Charts Lean Six Sigma Pocket Toolbook, p. 128.

  4. Exercise An automatic filling machine is used to fill 16 ounce cans of a certain product. Samples of size 5 are taken from the assembly line each hour and measured. The results of the first 25 subgroups are shown in the attached file with selected rows shown below. Does the process appear to be in statistical control? Source: Shirland, Statistical Quality Control, problem 5.2. If the specification limits are USL = 16.539 and LSL = 15.829 is the process capable?

  5. Different types of control charts Attribute (or count) data Situation Chart Control Limits Fraction of defectives fraction of orders not processed perfectly on first trial (first pass yield) fraction of requests not processed within 15 minutes p np Lean Six Sigma Pocket Toolbook, p. 132. source: Brian Joiner, Fourth Generation Management, p. 266-267.

  6. Attribute Based Control Charts: The p-chart =0.052 UCL= + 3 LCL= - 3 = s s s ˆ ˆ ˆ Period n defects p • Estimate average defect percentage • Estimate Standard Deviation • Define control limits • Divide time into: - calibration period (capability analysis) - conformance analysis =0.013 =0.091 =0.014

  7. Consider a data entry operation that makes numerous entries daily. On each of 24 consecutive days subgroups of 200 entries are inspected. Develop a p control chart for this process. Gitlow, Openheim, Openheim & Levine, Quality Management, 3ed.

  8. Revised Data

  9. Control, Capability and Design: Review • Every process displays variation in performance: normal or abnormal • Do not tamper with a process that is “in control” with normal variation • Correct an “out of control” process with abnormal variation • Control charts monitor process to identify abnormal variation • Control charts may cause false alarms (or missed signals) by mistaking normal (abnormal) variation for abnormal (normal) variation • Local control yields early detection and correction of abnormal variation • Process “in control” indicates only its internal stability • Process capability is its ability to meet external customer needs • Improving process capability involves (a) changing the mean in the short run, and (b) reducing normal variability in the long run, requiring investment • Robust, simple, standard, mistake - proof design improves process capability • Joint, early involvement in design by all improves product quality, speed, cost

  10. Capability and Design: Review • Process capability measures its precision in meeting processing requirements • Improving capability involves reducing variation and its impact on product quality • Simplicity, standardization, and mistake - proofing improve process capability • Joint design and early involvement minimizes quality problems, delays, cost

More Related