1 / 5

Rework Procedure for Wash Motor Pulley Change Model : Rosa & Rosa Plus

Rework Procedure for Wash Motor Pulley Change Model : Rosa & Rosa Plus. Part Details & Tools required. . Current Motor Pulley - Metal Fan + Aluminum Pulley. Modified Motor Pulley - Plastic Fan + Aluminum Pulley. Rework Procedure. Step 1 - How to disassemble base :.

marged
Download Presentation

Rework Procedure for Wash Motor Pulley Change Model : Rosa & Rosa Plus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rework Procedure for Wash Motor Pulley ChangeModel : Rosa & Rosa Plus Part Details & Tools required  Current Motor Pulley - Metal Fan + Aluminum Pulley Modified Motor Pulley - Plastic Fan + Aluminum Pulley

  2. Rework Procedure Step 1 - How to disassemble base : Unscrew the back cover screws- (Fig-01), and remove it from machine. Loosen the Nut & bolt of Brake wheel used for fixing Brake wheel to Spin tub shaft- (Fig-02). Turn the machine upside down and unscrew the screws of base- (Fig-03) Remove the base from the body of machine NOTE : Keep all screws, bolts & nuts carefully. Same will be used to assemble the machine after Pulley change. Back cover screw Loosen this Nut & Bolt Unscrew the screws to remove base (Fig-01) (Fig-02) (Fig-03)

  3. Rework Procedure Step 2 – Rework of Motor pulley : Loosen the Nut and Bolt of Motor pulley fitted in machine- (Fig-04) Lift the Motor Pulley and remove it from Motor shaft. Remove the three screws from Motor Pulley to remove the Metal Fan from Aluminum Pulley (Fig-05) Take Plastic Fan (New) and put metal washer (New) on old Al. Pulley. Pl s note to match the cut on metal washer with the longer rib on fan - (Fig – 06) Fix the three screws as shown –(Fig-06). Nut & Bolt (Fig-04) NOTE : Mark the old pulley with red marker as “REJECT” & send to QA for inspection. (Fig-05) Longer rib Three screws Metal Washer Al. Pulley (Fig-06) Metal Fan

  4. Rework Procedure At same height Step 3 - Assemble of pulley to the wash motor : Fix the pulley to the shaft of wash motor (Fig-07) Tighten the nut and bolt to fix the pulley to wash motor shaft- (Fig-07). NOTE : Bolt hole in Pulley should face the flat side of Motor shaft. Top of Al. Pulley should match with top of Motor shaft. Nut (Fig-07) Step 4 - V-Belt fitment : Assemble the Base to machine carefully. Tighten all screws of base- (Fig-08). Assemble the V belt to Al. pulley first and then on Gear case pulley- (Fig-09). NOTE : The two side of V-belt roller should be at same height. (Fig-08) Gear box pulley Al. Pulley (Fig-09)

  5. Rework Procedure Step 5 - Final checking & fitment of back cover : Check the wires and run the machine whether working properly or not. If it is working properly, then fit the back cover by 3 screws as fitted- (Fig-10). NOTE : Check and Tighten all the screws properly Back cover screw (Fig-10)

More Related