1 / 6

2000CIV 2½ ”-10”

2000CIV 2½ ”-10”. Modification Overview. Production of the 2000CIV (Watts 709) began in 1998 and was discontinued in 2007. Check Cover Removal. Cover is o-ring sealed. Loosen bolts ½”. Spring load is now released from the cover and retained by the check subassembly.

maida
Download Presentation

2000CIV 2½ ”-10”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2000CIV 2½ ”-10”

  2. Modification Overview • Production of the 2000CIV (Watts 709) began in 1998 and was discontinued in 2007.

  3. Check Cover Removal • Cover is o-ring sealed. • Loosen bolts ½”. Spring load is now released from the cover and retained by the check subassembly. • Verify spring load is retained before removing all the bolts.

  4. Check Valve Removal • Center stem guided check assembly. • Disc & spring subassembly. • Slide subassembly straight out of seat and body.

  5. Check Seat Removal * 21/2-3” Seats removed by ¼ turn twist. • 4”-10” Seats secured by two 10” retaining wires. • Pull one wire clockwise / one wire counter clockwise. • Seats are o-ring sealed and pull straight out of body.

  6. Check Disc Replacement • Remove retaining nut for sizes 21/2”-4”. • Remove allen head screws in retainer plate for sizes 6”-10”.

More Related