1 / 12

Changing Brushes on Standard Style Motors

Changing Brushes on Standard Style Motors. The FIRST step is to . Unplug the motor!. Do NOT remove the clamps freeing the brush mechs from the bracket…. . …with the lead still connected to brush. Removing Brush Clip terminal from Mech. Removing Brush Clip terminal from Mech.

mada
Download Presentation

Changing Brushes on Standard Style Motors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Changing Brushes on Standard Style Motors

  2. The FIRST step is to ... Unplug the motor!

  3. Do NOT remove the clamps freeing the brush mechs from the bracket…. …with the lead still connected to brush.

  4. Removing Brush Clip terminal from Mech

  5. Removing Brush Clip terminal from Mech

  6. Removing Brush Clip terminal from Mech

  7. Installing new brush mech.

  8. Slide brush clip between Nylon and Brass

  9. Make certain positioning tab is placed in slot.

  10. Install brush clamp screws

  11. Seat the brushes by opertaing at half voltage for 20-30 minutes. Use two motors in electrical SERIES; 60 volts dropped across each motor.

  12. Ideal Industries – Cat No. 23-001H Brush Seater and Commutator Cleaner www.idealindustries.com

More Related