1 / 8

Quality Management System

FACULTY MANAGEMENT. Quality Management System. Argenis Osorio – Manager, Quality Assurance 10 October 2013. Non-Conforming Product/Service. Non-Conforming Product/Service. Purpose and Scope

lynsey
Download Presentation

Quality Management System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FACULTY MANAGEMENT Quality Management System Argenis Osorio – Manager, Quality Assurance10 October 2013 Non-Conforming Product/Service

  2. Non-Conforming Product/Service • Purpose and Scope • This procedure defines the process, roles and responsibilities involved in handling and processing any defective product or service in Facilities Management at the University of Calgary, to ensure that product/service that does not conform to requirements is identify and controlled to prevent its unintended used or delivery. • This procedure does not apply to contractor’s facilities or supplier’s facilities. These facilities are expected to manage their non-conforming product/service in accordance to their own internal procedures that are in alignment with the applicable standards where applicable. 2

  3. Non-Conforming Product/Service • Non-conforming product/part should be rejected for the following reasons: • Safety, • Durability, • Weight, • Health reasons, • Performance, • Appearance, and • Reliability. • Non-conforming services may include: • Business Processes, SOPs and/or Guidelines incorrectly followed • Customer complaints, • Identification of lacking Business Processes, SOPs, Guidelines, Forms, etc., and • Contractor’s service. 3

  4. Non-Conforming Product/Service • Responsibilities of Managers/Supervisors/Employees • Managers / Supervisors: • Conduct a preliminary review/evaluation of a reported material/part non-conformance, and • Ensure non-conforming product/part or service identified through inspection, audit and/or customer complaint should be segregated, documented and tagged. • Employees: • Identify, control and notify the Department Supervisor/Manager (or Delegate) of any non-conforming material/part or service. 4

  5. Non-Conforming Product/Service 5

  6. Non-Conforming Product/Service • The following possible dispositions may be determined by the supervisor/manager (or delegate): • Use As Is: the product/part may be used as is without any repair, rework or any other form of alteration. This applies when the suspected product/part non-conformance is determined to the acceptable for use in its current state, • Rework: the identified non-conforming product/part may be used after rework (these products/parts shall be subject to re-verification to demonstrate conformity to the requirements), • Return to Vendor: the non-conforming product/part may be returned to the original vendor for evaluation, rework, disposal or replacement, and • Scrap: the non-conforming product/part is not reparable or salvageable and must be disposed. This applies when the cost of a possible modification, rework, alteration or repair is beyond acceptable economical consideration. Product/parts with cost of less than $125 CAD may be scrapped without racing an NCR. 6

  7. Non-Conforming Product/Service • Root Cause Analysis Tools • Ishikawa / Fishbone / Cause and Effect Diagram 7

  8. Non-Conforming Product/Service • Root Cause Analysis Tools - Continued • 5 Whysis an interactive question-asking technique used to explore the cause-and-effect relationships underlying a particular problem. • Example: • The vehicle will not start. (the problem) • Why? - The battery is dead. (first why) • Why? - The alternator is not functioning. (second why) • Why? - The alternator belt has broken. (third why) • Why? - The alternator belt was well beyond its useful service life and not replaced. (fourth why) • Why? - The vehicle was not maintained according to the recommended service schedule. (fifth why, a root cause) • Why? - Replacement parts are not available because of the extreme age of the vehicle. (sixth why, optional footnote) • Start maintaining the vehicle according to the recommended service schedule. (possible 5th Why solution) • Adapt a similar car part to the car. (possible 6th Why solution) 8

More Related