1 / 11

Force Sensitive Resistors(FSRs): An introduction

Force Sensitive Resistors(FSRs): An introduction. Ryan Chin, rchin@media.mit.edu. FSRs What are they?. Force Sensitive Resistors or Pressure Sensors Type of resistor whose resistance changes when a force or pressure is applied The resistance is inversely proportional to the force applied .

lynn
Download Presentation

Force Sensitive Resistors(FSRs): An introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Force Sensitive Resistors(FSRs):An introduction Ryan Chin, rchin@media.mit.edu

  2. FSRs What are they? • Force Sensitive Resistors or Pressure Sensors • Type of resistor whose resistance changes when a force or pressure is applied • The resistance is inversely proportional to the force applied The threshold, or "break force", that swings the resistance from greater than 1M to about 50-100 K [ 1. Resistance (Ohms) vs. Force (g) for an Interlink FSR ]

  3. FSRs How they work • Particle size at the scale of microns • Formulated to reduce temp. dependence, and improve mechanical properties • Force on the surface causes particles to touch conducting electrodes changing the resistance

  4. FSRs How they work • FSRs consist of a piezoresistivity conductive polymer, which changes resistance in a predictable manner following application of force to its surface • Usually come in a sandwich sheet on sensing Film • Film: 1) electrically conducting and 2) non-conducting particles suspended in matrix.

  5. FSRs Characteristics • Manufactured as single pads, linear pots, 2D arrays and in several other forms • Detect even very weak forces. Recognizing not only the magnitude of the force, but also the difference of the touching manner • 3 main components in a FSR assembly • Substrate to attach • FSR • Microcontroller • not sensitive to vibration or heat • No user feedback, except maybe the button can be induced to move slightly.

  6. FSRs Characteristics • Usually come in a sandwich sheet on sensing Film • response is in the range of 0-2kg, which is common to human interface applications, is very linear force vs. conductance (1/resistance)

  7. Simple FSRs and Arrays Parameter Value Conditions Size Range Max = 20" x 30" (51 x 76 cm)Min = 0.2" x 0.2" (0.5 x 0.5 cm) Any shape Device Thickness 0.008" to 0.050" (0.20 to 1.25 mm) Force Sensitivity Range 30g to 10kg Pressure Sensitivity Range 0.45psi to 150psi(0.03 kg/cm2 to 10 kg kg/cm2) 30g to 10kg1 cm2 actuator Part to Part Force Repeatability ± 15% full scale For typical part with consistent actuation Single Part Force Repeatability ± 2% full scale FSRs Characteristics

  8. Force Resolution Better than 0.5% full scale Break Force 30 to 100g (1 to 3.5 oz) typical Dependent on probe size/shape Stand-Off Resistance > 1M Switch Characteristic Essentially zero travel Device Rise Time 1-2msec (mechanical) Lifetime >10 million actuations Use Temperature -30ºC to 170ºC High temperature adhesives Maximum Current 1 mA/cm2 of applied force Sensitivity to Noise/Vibration Not significantly affected EMI/ESD Passive device -- not damaged by EMI or ESD Lead Attachment Standard flex circuit techniques See TechNote FSRs Characteristics

  9. FSR Accuracy • dynamic measurement, only qualitative results are generally obtainable.  • Force accuracy ranges from approximately ± 5% to ± 25% depending on the consistency of the measurement and actuation system • Repeatability tolerance held in manufacturing, and the use of part calibration. manufacturing ranges from ± 15% to ± 25% of an established nominal resistance. • The force resolution of FSR devices is better than ± 0.5% of full use force.

  10. FSRs Types • Basic sensors – single point (usually circular) • Simple array - Two or more PS3s on a single substrate with one common conductor track plus an individual track for each sensor cell. • Matrix – rows and columns • Continuous Strip – up to 15 meters • Co-ordinates & Pressure Sensing Sensors

  11. FSR Suppliers • Interlink electronics, http://www.interlinkelec.com/ • IEE (UK), http://www.steadlands.com/ • Tekscan, http://www.tekscan.com/index.html

More Related