Demolition 29 CFR 1926, Subpart T

1. Demolition29 CFR 1926, Subpart T

2. Overview of the OSHA regulation Preparations Pre-job survey By competent person Determine structural integrity Have evidence in writing

3. Overview of the OSHA regulation Preparations All utilities shut off Needed utilities relocated to temporary hook-up Identify hazards & guard (glass) Cover all floor openings not to be used

4. Stairs, Passageways, & Ladders Close those not to be used Maintain only those for access Proper illumination needed

5. Chutes No dropping of materials outside the building w/o protection (chute) Totally enclose chutes 45 degrees & greater End of chute guarded

6. Masonry Removal Do not overload floors with materials from other floors or components Totally enclose chutes 45 degrees & greater Safe access to scaffolds & walkways required

7. Floor Removal Provide adequate work surfaces for employees Minimum 2X10 (undressed) planks Openings less than 16”

8. Using Equipment for Removal Check structure’s ability to support load Provide curbs to prevent driving over edge Meet all aspects of Subparts N & O

9. Storage Debris on floors must not exceed allowable floor loads

10. Mechanical Demolition Keep employees out of work area Remove heavy building attachments prior to demo Cut steel prior to pulling over Competent person must oversee job