1 / 8

Finding Percent Error

Finding Percent Error. Units to compare: English Unit Metric Unit yards to meters feet to decimeters inches to centimeters In a perfect world, there are actually: 0.91 meters in one yard 3.048 decimeters in one foot 2.54 centimeters in one inch. To find percent error: Step 1:

lydiae
Download Presentation

Finding Percent Error

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Finding Percent Error

  2. Units to compare: • English UnitMetric Unit yards to meters feet to decimeters inches to centimeters • In a perfect world, there are actually: • 0.91 meters in one yard • 3.048 decimeters in one foot • 2.54 centimeters in one inch

  3. To find percent error: • Step 1: • Take your metric measurement divided by your English measurement. • Height of book: • 11.2 inches • 28.3 centimeters • 28.3 ÷ 11.2 = 2.53

  4. Step 2: • Take your result minus the actual number for the units you are using. • Actual for inches and centimeters is 2.54. • 2.53 – 2.54 = -0.01

  5. Step 3: • You might end up with a negative number, so take the negative sign off. • -0.01 = 0.01

  6. Step 4: • Take your result divided by the actual number for the units you are using. • 0.01 ÷ 2.54 = 0.0039

  7. Step 5: • Change this number into a percent by multiplying it by 100 (or by moving the decimal point two places to the right – same answer) • 0.0039 x 100 = 0.39%

  8. Step 6: • Check. Is your answer less than 10%? • For this lab, having less than 10% error is okay.

More Related