1 / 8

Health and Safety

Health and Safety. Designers have a duty of care . They have a responsibility to ensure the products we use are safe . This only applies if the product is being used for the purpose for which it was intended, by the users for whom it was intended and in the environment it was intended for.

luka
Download Presentation

Health and Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Health and Safety Designers have a duty of care. They have a responsibility to ensure the products we use are safe. This only applies if the product is being used for thepurposefor which it was intended, by the usersfor whom it was intended and in theenvironmentit was intended for.

  2. Personal Safety is about making sure people are not exposed to unnecessary risk and harm • Using personal protection equipment – eye protection, face masks, safety shoes, overalls • Check tools and equipment are safe to use – that everything is in good working order • Maintain a safe environment – nothing on floor to trip over, extraction systems working properly • Accident procedures clearly understood • 1) make scene of accident safe • 2) assess the injury • 3) treat the injury • 4) write an accident report • 5) undertake work to prevent accident happening again.

  3. Risk assessment • 1) identify the specific risk e.g. for using an iron the risk is burning your hand or arm with the iron or getting a burn from steam, also risk of dropping iron on your foot. • 2) assess the probability or chances of an accident happening • 3) minimise risk: is there anything you can do to reduce the likelihood of an accident taking place. • After considering these three aspects, the risk becomes acceptable or not acceptable.

  4. COSHH • The law requires employers to control exposure to hazardous substances. Employers have to comply with the Control of Substances Hazardous to Health Regulations 2002 (COSHH) • FUMES, DUST, BACTERIA, ADHESIVES, PAINTS can lead to skin irritation, dermatitis, asthma, losing consciousness, cancer, infection • E.g. – solvent based spray glues, tensol cement, etching agents for PCBs, soldering and dusts produced from cutting and finishing materials

  5. Quality • Quality of design is not about manufacture. It could be the look or the novel concept – user perception plays a part. • Quality of design is indicated by • how well product functions, • how aesthetically pleasing it is and • how appealing it is to the user. • It must also be sustainable – standing the test of time, not having a negative impact on the environment.

  6. Quality of manufacture • How well a product has been made • How appropriate materials are – consider cost, availability, working properties and environmental issues • How appropriate manufacture methods are • How good the surface finish is • How well components fit into product • Quality depends on Design Tolerance allowable. e.g. 100mm ±2mm for a distance or a resistor of 2k with a tolerance of ± 5% (gold band)

  7. Quality Control Quality control is about ensuring that products conform to standards that will ensure they are safe to use. Quality control checks are required. You must identify key quality control points in the manufacturing process. Quality marks and symbols show they meet agreed standards e.g. ISO9000 – quality management system to ensure continual improvement.

  8. Quality marks: BS kitemark and CE mark A kitemark means the British Standards Institute (BSI) has independently tested a product, confirmed that it conforms to the relevant British Standard, and has issued licence to the company to the company to use the kitemark. Safety and reliability in such things as fridges, plugs, helmets are shown by these marks The CE marking (also known as CE mark) is a mandatoryconformity mark on many products placed on the single market in the European Economic Area (EEA). The CE marking certifies that a product has met EU consumer safety, health or environmental requirements. CE stands for Conformité Européenne, "European conformity" in French.

More Related