1 / 24

Chapter 33

Chapter 33. Foundation Systems. Introduction. All structures are required to have a foundation Provides a base to distribute weight onto soil Must be evenly distributed to prevent it from compressing the soil Must resist floods, winds, earthquakes, and floodwater debris. Soil Considerations.

Download Presentation

Chapter 33

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 33 Foundation Systems

  2. Introduction • All structures are required to have a foundation • Provides a base to distribute weight onto soil • Must be evenly distributed to prevent it from compressing the soil • Must resist floods, winds, earthquakes, and floodwater debris

  3. Soil Considerations • Soil texture • Affects ability to resist load of foundation • Bearing capacity must be known • Structures built low bearing capacity soil require footings

  4. Soil Considerations (cont’d.) • Compaction methods • Static force • Impact forces • Vibration • Freezing • Foundation should be built to a depth where ground is not subject to freezing • Expansion and shrinking can cause cracking

  5. Soil Considerations (cont’d.) • Water content • As soil absorbs water, it expands • Causes foundation to heave • Resisted through proper drainage and reinforcing foundation and floor slab • Radon • Cancer-causing gas • Structures built in areas with high levels must provide protection

  6. Types of Foundations • Piling foundation system • Beams are placed between vertical supports (i.e., piling) to support structural loads • Steep hillsides • Where structure load exceeds soil bearing capacity • Sites subject to flooding or natural forces that cause large amounts of soil to be removed

  7. Types of Foundations (cont’d.) • Continuous or spread foundation • Most common for residential construction • Consists of a footing and wall • Concrete strength must be specified • For areas of soft soil or fill material, reinforcement steel (i.e., rebar) is used

  8. Types of Foundations (cont’d.) • Grade beams • Added support for a foundation in unstable soil • Fireplace footings • IRC requires minimum footing 12" deep and extend 6" past fireplace face • Veneer footings • Must be wide enough to provide adequate support

  9. Types of Foundations (cont’d.) • Foundation wall • Vertical wall • Extends from top of footing to first-floor level • Usually centered on footing to spread loads • Follow IRC and municipal requirements

  10. Types of Foundations (cont’d.) • Additional considerations for the foundation wall • Stem wall construction • Anchor bolts • Termite protection • Wood floor support • Wood floor ventilation and access • Foundation wall insulation and reinforcement

  11. Types of Foundations (cont’d.) • Retaining or basement walls • Extends full height between basement floor and main floor level • Primarily made of concrete blocks, poured concrete, or concrete-filled insulated concrete foam blocks • Material used will depend on area trends

  12. Types of Foundations (cont’d.) • Additional considerations for retaining or basement walls • Retaining wall reinforcement and anchorage • Moisture protection • Foundation windows • Treated-wood basement walls • Pressure-treated lumber can be used to frame crawl space and basement walls

  13. Types of Foundations (cont’d.) • Partial-height retaining walls • When a structure is built on a sloping site, retaining wall will not need to be full height • More problems are encountered

  14. Types of Foundations (cont’d.) • Interior load supports • Supported on spot footings or piers • Metal connectors • Used at the foundation level to resist stress from wind and seismic forces

  15. Dimensioning Foundation Components

More Related