5V/6V jump pin/cavalier
This presentation is the property of its rightful owner.
Sponsored Links
1 / 1

UBEC PowerPoint PPT Presentation


  • 80 Views
  • Uploaded on
  • Presentation posted in: General

5V/6V jump pin/cavalier. UBEC. Input power from battery Entrée en provenance du pack de propulsion. Power Output to receiver Sortie à brancher sur le récepteur. Specifications for XPower UBEC: Output: 5V/3A & 6V/3A, can be switched by jump pins. Ripple: <50mVp-p ( @2A/12V)

Download Presentation

UBEC

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Ubec

5V/6V jump pin/cavalier

UBEC

Input power from battery

Entrée en provenance

du pack de propulsion

Power Output to receiver

Sortie à brancher sur

le récepteur

Specifications for XPower UBEC:

Output: 5V/3A & 6V/3A, can be switched by jump pins.

Ripple: <50mVp-p ( @2A/12V)

Input: 5.5V-23V (2-5S lithium battery pack, 5-15 cells NiMh / NiCd battery pack)

Size: 41.6mm*16.6mm*7.0mm (length*width*height)

Weight: 6g(input and output cables are not included)/9g(cables are included)

Caractéristiques techniques de l’UBEC XPower:

- Sortie: 5V/3A et 6V/3A switchable (par cavalier)

- Alimentation: 5,5V-23V (Pack d'accu Lithium 2-5S, pack d'accu NiCd/NiMh 5-15 éléments)

- Taille: 41,6x16x6x7,0mm (Lxlxh)

- Poids: 6g (câble non inclus), 9g (avec les câbles d'alimentation et de sortie)

How to use:

Select the output voltage by 5V/6V jump pin. Connect the power output pins to receiver (B mark on

receivers), make sure to connect right polarity. Then from input power side, connect to the wires to battery.

Comment l’utiliser:

Sélectionner la tension de sortie 5V ou 6V avec le cavalier. Connecter la prise de sortie au récepteur,

s’assurer de la pôlarité correcte. Puis sur les câbles d’entrée, connecter le pack d’accu de propulsion


  • Login