1 / 15

Remote Control Helicopter

Remote Control Helicopter. Group 9 Moiz Kapadia Adam Golembeski Eric Silk Paul DiFilipo. Motivation. A majority of the members are pursuing the aerospace option. Interested to learn and understand the dynamics of a helicopter.

lonato
Download Presentation

Remote Control Helicopter

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Remote Control Helicopter Group 9 Moiz Kapadia Adam Golembeski Eric Silk Paul DiFilipo

  2. Motivation • A majority of the members are pursuing the aerospace option. • Interested to learn and understand the dynamics of a helicopter. • The RC Dragonfly posed as an appropriate challenge for 4 group members.

  3. How the RC Dragonfly Works • Helicopters generate lift by creating a pressure differential across the blade • The motion of the swash plate regulates the forward, backward, left & right motion • Yaw is controlled by the speed of the tail rotor

  4. How the RC Dragonfly Works con’t.. • Flybars work in conjunction with the swash plate to guide the roll & pitch • Servo motors control the motion of the swash plate • This is a fixed pitch model, meaning the main rotors are rigid to the shaft.

  5. Major Components • Battery Tray • Tail Rotor • Main Chassis and Landing Gear • Main Rotor • Swash Plate • Body

  6. Battery Tray • Mirror, extrude, and cut. • Basic constraints such as axis align, datum plane offset and mate was used.

  7. Tail Rotor • Revolve, extrude, mirror, shell methods were implemented in modeling. • Pin connections. • Gear connections made in mechanism mode

  8. Chassis and Landing Gear • Mirror, extrude, cut, sweep protrusions. • Axis align, datum plane offset, and mate. • Intricate angles were measured to fully constrain the landing gear and support beams

  9. Main Rotor • Contains complex series of constraints including pin, bearing and ball joint. • Simple methods of modeling such extrude, cut and mirror were implemented.

  10. Swash Plate

  11. Helicopter Body • Outlined digital pictures of body with Style Tool, Mirror, Shell, and Extrudes to model the main body. • Cut out of windshield, color, and reassemble.

  12. Problems Encountered • Constraining servo motors • Replicating swash plate movement • Parts needing to be re-measured • Unit corrections

  13. Full Animation

  14. Final Assembly

  15. Thank you Ray for all your help & motivation this semester. Thank You

More Related