1 / 7

EQUIPMENT

This product is a CW/SSB transceiver with an integrated amplifier, designed for receiving and transmitting RF signals at 28 MHz. It features a single-conversion superheterodyne receiver with a product detector and 455 KHz bandpass filtering for selectivity. The FM receiver operates at VHF/UHF frequencies at 146 MHz and features a limiter to eliminate any AM trace. The FM to audio RF preamplifier increases sensitivity, while the CW transmitter includes an oscillator. Additional equipment includes a transverter for frequency conversion and an RF power amplifier ranging from 5 Watts to 25 Watts.

lolam
Download Presentation

EQUIPMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EQUIPMENT

  2. Radio Transceiver (and Amplifier)

  3. Transceiver Block Diagram

  4. CW/SSB Receiver Single-conversion superheterodyne receiver for CW/SSB 28 MHz CW/SSB RF signals Product Detector 455 KHz BP filtering for selectivity 500 Hz 455.5 KHz 28.455 MHz

  5. FM Receiver (VHF/UHF) 146 MHz FM RF signals Limiter Eliminates Any trace of AM Discriminator FM to Audio RF preamplifier Increases sensitivity 1 KHz 10.7 MHz 135.3 MHz

  6. CW Transmitter Oscillator

  7. Other Equipment • Transverter – Transmitter frequency converter • Example: 28 MHz up to 222 MHz • RF Power Amplifier – 5W up to 25 Watts (see satellite setup)

More Related