1 / 25

Pharos University in Alexandria Faculty of Allied Medical Science

Pharos University in Alexandria Faculty of Allied Medical Science. Biomedical Physics (GRBP-101). Prof. Dr. Mostafa. M. Mohamed Vice Dean. Dr. Mervat Mostafa Department of Medical Biophysics Pharos University. Part (2). The Motion of Fluids. Bernoulli’s Equation.

lola
Download Presentation

Pharos University in Alexandria Faculty of Allied Medical Science

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pharos University in Alexandria Faculty of Allied Medical Science Biomedical Physics (GRBP-101) Prof. Dr. Mostafa. M. Mohamed Vice Dean Dr. Mervat Mostafa Department of Medical Biophysics Pharos University Dr. Mervat Mostafa

  2. Part (2) The Motion of Fluids Dr. Mervat Mostafa

  3. Bernoulli’s Equation If frictional losses are neglected, the flow of an incompressible fluid is governed by Bernoulli’s equation, which gives the relationship between velocity, pressure, and elevation in a line of flow. Bernoulli’s equation states that at any point in the channel of a flowing fluid the following relationship holds: Dr. Mervat Mostafa

  4. Flow of fluid through a pipe with two segments of different areas. We will illustrate the use of Bernoulli’s equation with a simple example. Consider a fluid flowing through a pipe consisting of two segments with crosssectional areas A1 and A2, respectively. The volume of fluid flowing per second past any point in the pipe is given by the product of the fluid velocity and the area of the pipe, A×v. If the fluid is incompressible, in a unit time as much fluid must flow out of the pipe as flows into it. Therefore, the rates of flow in segments 1 and 2 are equal; that is, Dr. Mervat Mostafa

  5. where the subscripts designate the parameters at the two points in the flow. Because in our case the two segments are at the same height (h1 h2) Dr. Mervat Mostafa

  6. This relationship shows that while the flow velocity in segment 2 increases, the pressure in that segment decreases. Laminar flow. The length of the arrows indicates the magnitude of the velocity of the fluid. Dr. Mervat Mostafa

  7. Frictionless flow is an idealization. In a real fluid, the molecules attract each other; consequently, relative motion between the fluid molecules is opposed by a frictional force, which is called viscous friction. Viscous friction is proportional to the velocity of flow and to the coefficient of viscosity for the given fluid. If viscosity is taken into account, that the rate of laminar flow Q through a cylindrical tube of radius R and length L is given by Poiseuille’s law, which is Dr. Mervat Mostafa

  8. where P1 −P2 is the difference between the fluid pressures at the two ends of the cylinder and η is the coefficient of viscosity measured in units of dyn (sec/cm2), which is called a poise. The viscosities of some fluids are listed. In general, viscosity is a function of temperature and increases as the fluid becomes colder. Dr. Mervat Mostafa

  9. drop always accompanies viscous fluid flow. By rearranging last Equation, we can express the pressure drop as The expression P1 −P2 is the pressure drop that accompanies the flow rate Q along a length L of the pipe. The product of the pressure drop and the area of the pipe is the force required to overcome the frictional forces that tend to retard the flow in the pipe segment. Dr. Mervat Mostafa

  10. Turbulent Flow Here D is the diameter of the cylinder, ρ is the density of the fluid, and η is the viscosity. The symbol is the Reynold’s number, which for most fluids has a value between 2000 and 3000. The frictional forces in turbulent flow are greater than in laminar flow. Therefore, as the flow turns turbulent, it becomes more difficult to force a fluid through a pipe. Dr. Mervat Mostafa

  11. Turbulent fluid flow. Dr. Mervat Mostafa

  12. Circulation of the Blood The circulation of blood through the body is often compared to a plumbing system with the heart as the pump and the veins, arteries, and capillaries as the pipes through which the blood flows. This analogy is not entirely correct. Blood is not a simple fluid; it contains cells that complicate the flow, especially when the passages become narrow. Furthermore, the veins and arteries are not rigid pipes but are elastic and alter their shape in response to the forces applied by the fluid. Still, it is possible to analyze the circulatory system with reasonable accuracy using the concepts developed for simple fluids flowing in rigid pipes. Dr. Mervat Mostafa

  13. Schematic diagram showing various routes of the circulation. Dr. Mervat Mostafa

  14. The large artery, called the aorta, which carries the oxygenated blood away from the left chamber of the heart, branches into smaller arteries, which lead to the various parts of the body. These in turn branch into still smaller arteries, the smallest of which are called arterioles. As we will explain later, the arterioles play an important role in regulating the blood flow to specific regions in the body. The capillaries are so profusely spread through the tissue that nearly all the cells in the body are close to a capillary. The exchange of gases, nutrients, and waste products between the blood and the surrounding tissue occurs by diffusion through the thin capillary walls). The capillaries join into tiny veins called venules, which in turn merge into larger and larger veins that lead the oxygen-depleted blood back to the right atrium of the heart. Dr. Mervat Mostafa

  15. Blood Pressure As the blood flows through the circulatory system, its initial energy, provided by the pumping action of the heart, is dissipated by two loss mechanisms: losses associated with the expansion and contraction of the arterial walls and viscous friction associated with the blood flow. Due to these energy losses, the initial pressure fluctuations are smoothed out as the blood flows away from the heart, and the average pressure drops. By the time the blood reaches the capillaries, the flow is smooth and the blood pressure is only about 30 torr. The pressure drops still lower in the veins and is close to zero just before returning to the heart. In this final stage of the flow, the movement of blood through the veins is aided by the contraction of muscles that squeeze the blood toward the heart. One-way flow is assured by unidirectional valves in the veins. Dr. Mervat Mostafa

  16. Dr. Mervat Mostafa

  17. Blood pressure in a reclining and in an erect person. Dr. Mervat Mostafa

  18. Control of Blood Flow The flow of blood to specific parts of the body is controlled by the arterioles. These small vessels that receive blood from the arteries have an average diameter of about 0.1 mm. The walls of the arterioles contain smooth muscle fibers that contract when stimulated by nerve impulses and hormones. The contraction of the arterioles in one part of the body reduces the blood flow to that region and diverts it to another. Since the radius of the arterioles is small, constriction is an effective method for controlling blood flow. Poiseuille’s equation shows that if the pressure drop remains constant, a 20% decrease in the radius reduces the blood flow by more than a factor of 2 Dr. Mervat Mostafa

  19. Energetics of Blood Flow For an individual at rest, the rate of blood flow is about 5 liter/min. This implies that the average velocity of the blood through the aorta is 26.5 cm/sec. However, the blood in the aorta does not flow continuously. It moves in spurts. During the period of flow, the velocity of the blood is about three times as high as the overall average value calculated in Exercise 8-6. Therefore, the kinetic energy per cubic centimeter of flowing blood is Dr. Mervat Mostafa

  20. Turbulence in the Blood if the velocity of a fluid exceeds a specific critical value, the flow becomes turbulent. Through most of the circulatory system the blood flow is laminar. Only in the aorta does the flow occasionally become turbulent. Assuming a Reynold’s number of 2000, the critical velocity for the onset of turbulence in the 2-cm-diameter aorta is, Dr. Mervat Mostafa

  21. Power Produced by the Heart The energy in the flowing blood is provided by the pumping action of the heart. We will now compute the power generated by the heart to keep the blood flowing in the circulatory system. The power PH produced by the heart is the product of the flow rate Q and the energy E per unit volume of the blood; that is, Dr. Mervat Mostafa

  22. Measurement of Blood Pressure The arterial blood pressure is an important indicator of the health of an individual. Both abnormally high and abnormally low blood pressures indicate some disorders in the body that require medical attention. High blood pressure, which may be caused by constrictions in the circulatory system, certainly implies that the heart is working harder than usual and that it may be endangered by the excess load. Blood pressure can be measured most directly by inserting a vertical glass tube into an artery and observing the height to which the blood rises Dr. Mervat Mostafa

  23. Exercises • Compute the drop in blood pressure along a 30-cm length of artery of radius 0.5 cm. Assume that the artery carries blood at a rate of 8 liter/min. Dr. Mervat Mostafa

  24. (a) Show that if the pressure drop remains constant, reduction of the radius of the arteriole from 0.1 to 0.08 mm decreases the blood flow by more than a factor of 2. (b) Calculate the decrease in the radius required to reduce the blood flow by 90%. • Compute the average velocity of the blood in the aorta of radius 1 cm if the flow rate is 5 liter/min. • When the rate of blood flow in the aorta is 5 liter/min, the velocity of the blood in the capillaries is about 0.33 mm/sec. If the average diameter of a capillary is 0.008 mm, calculate the number of capillaries in the circulatory system. Dr. Mervat Mostafa

  25. Compute the decrease in the blood pressure of the blood flowing through an artery the radius of which is constricted by a factor of 3. Assume that the average flow velocity in the unconstricted region is 50 cm/sec. • Using information provided in the text, calculate the power generated by the left ventricle during intense physical activity when the flow rate is 25 liter/min. • Using information provided in the text, calculate the power generated by the right ventricle during (a) restful state; blood flow 5 liter/min, and (b) intense activity; blood flow 25 liter/min. Dr. Mervat Mostafa

More Related