1 / 32

Real-Time Simulation of Power Systems for Smart Grids Protection and Control

Real-Time Simulation of Power Systems for Smart Grids Protection and Control . Reza Razzaghi. Thesis co-directors M. Paolone , F. Rachidi Distributed Electrical System Laboratory – DESL http ://desl- pwrs.epfl.ch. Introduction Motivation State-of-the-art

lok
Download Presentation

Real-Time Simulation of Power Systems for Smart Grids Protection and Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Real-Time Simulation of Power Systems for Smart Grids Protection and Control Reza Razzaghi Thesis co-directors M. Paolone, F. Rachidi Distributed Electrical System Laboratory – DESL http://desl-pwrs.epfl.ch

  2. Introduction Motivation State-of-the-art FPGA-based real-time simulator for power systems Optimal selection of switch parameter FPGA-based real-time simulator Fault location in transmission lines using EMTR Time reversal process Experimental validation Simulation case studies Outline 1

  3. Introduction Motivation State-of-the-art FPGA-based real-time simulator for power systems Optimal selection of switch parameter FPGA-based real-time simulator Fault location in transmission lines using EMTR Time reversal process Experimental validation Simulation case studies Outline 2

  4. IntroductionMotivation • Smart Grids • Progressiveinstallationof distributed energy resources (DERs) • Evolution of distribution networks passive  active • Planning • Operation • Control • Challenges • Distribution network protection and fault location • Optimal voltage and power flow controls Real-time monitoring and control functionalities 3

  5. Introduction State-of-the-Art • Existing real-time simulators are based on various types of processors: • General purpose processors (GPPS) • Digital signal processors (DSPs) • Computer clusters • However, existing real-time simulators have limitations such as: • Lower-bound limitation of the minimum simulation time-step • Limitation in simulation of high frequency phenomena (power converters, short transmission lines) • Inherent complexity of the hardware architecture characterized by several layers each one devoted to a specific function (i.e. A/D and D/A conversions, CPU computation, data transfer and storage, etc.). FPGA-based real-time simulators 5

  6. Introduction State-of-the-Art 6

  7. Introduction State-of-the-Art • FPGA-based real-time simulator • FPGA-based real-time simulator for electromagnetic transients study of power electronics [5] • FPGA-based real-time simulator for electromagnetic transients study of AC machines [17] • FPGA-based real-time simulator for electromagnetic transients studies of power systems including transmission lines [7] • Fixed Admittance Matrix • Nodal Method (FAMNM) • Classical nodal analysis • Lumped elements • Transmission lines model • Classical nodal analysis • Not-fixed admittance matrix 7

  8. Introduction Motivation State-of-the-art FPGA-based real-time simulator for power systems Optimal selection of switch parameter FPGA-based real-time simulator Fault location in transmission lines using EMTR Time reversal process Experimental validation Simulation case studies Outline 8

  9. FPGA-based real-time simulator for power systems • 1- Network solution method • Modified nodal analysis (MNA) • State-space method • 2- Numerical integration method • Trapezoidal method • Euler methods • 3- Network components model • Lumped elements (R,L,C,…) • Transmission lines 9

  10. FPGA-based real-time simulator for power systems • Methodology • Modified nodal analysis (MNA) 10

  11. FPGA-based real-time simulator for power systems • Methodology • Fixed Admittance Matrix Nodal Method (FAMNM) system nodal matrix remains unchanged during switching transitions Pejovic, P.; Maksimovic, D, “A Method for Fast Time-Domain Simulation of Networks with Switches,” IEEE Trans. Power Electron. 1994, 9, 449–456. 11

  12. FPGA-based real-time simulator for power systems • Optimal selection of discrete-time switch model 12

  13. FPGA-based real-time simulator for power systems • Optimal selection of discrete-time switch model Objective function Error function Losses function 13

  14. FPGA-based real-time simulator for power systems • Optimal selection of discrete-time switch model 14

  15. FPGA-based real-time simulator for power systems • Optimal selection of discrete-time switch model 15

  16. FPGA-based real-time simulator for power systems • System configuration 16

  17. FPGA-based real-time simulator for power systems • Proposed algorithm for FPGA-based real-time simulator 17

  18. FPGA-based real-time simulator for power systems • Application example Simulation time step: 4ms 18

  19. FPGA-based real-time simulator for power systems • Application of the FPGA-based real-time simulator joined with the EMTR Fault Location 19

  20. Introduction Motivation State-of-the-art FPGA-based real-time simulator for power systems Optimal selection of switch parameter FPGA-based real-time simulator Fault location in transmission lines using EMTR Time reversal process Experimental validation Simulation case studies Outline 20

  21. FPGA-based real-time simulator for power systems • Fault location in power systems transmission lines • Transmission system: Power system security • Distribution system: Power system quality i) Analysis of pre- and post-fault voltage/current phasors Fault location methods: ii) Analysis of fault-originated electromagnetic transients of currents and/or voltages Active distribution networks: Electromagnetic Time Reversal 21

  22. Fault location in transmission lines using EMTR • The time-reversal focusing procedure: a. Transient waveforms generated by a source propagate through the medium and are recorded by sensors. b. The recorded signals are reversed in time and re-emitted back to the medium. In view of the reversibility in time of the wave equation, travelling waves are refocused into the source point • N. Mora, F. Rachidi, M. Rubinstein, "Application of the Time Reversal of Electromagnetic Fields to Locate Lightning Discharges", Journal of Atmospheric Research, Vol. 117, pp. 78-85, 2012. 22

  23. Fault location in transmission lines using EMTR • The time-reversal focusing procedure: 23

  24. Fault location in transmission lines using EMTR • Electromagnetic time reversal (EMTR) in transmission lines Wave equation is time invariant 24

  25. Fault location in transmission lines using EMTR • Fault location algorithm • based on EMTR 25

  26. Fault location in transmission lines using EMTR • Application example HV transmission lines (simulation) 26

  27. Fault location in transmission lines using EMTR • Application example (reduced-scale experimental setup) 27

  28. Fault location in transmission lines using EMTR Inhomogeneous network composed of mixed overhead-coaxial cable lines. 3ph fault, Xf= 7km, Rf= 0 Ω 3ph fault, Xf=5 km, Rf= 100 Ω 28

  29. Fault location in transmission lines using EMTR • B. Radial distribution network: IEEE 34-bus test distribution feeder 3ph, Xf= 808, Rf=0 Ω 3ph, Xf= 812, Rf=100 Ω 29

  30. Fault location in transmission lines using EMTR • B. Radial distribution network: IEEE 34-bus test distribution feeder 1ph, Xf= 810, Rf=0 Ω 1ph, Xf= 806, Rf=100 Ω 30

  31. Fault location in transmission lines using EMTR • C. Series-compensated transmission line Single-phase-to-ground fault Double-phase-to-ground fault Three-phase-to-ground fault 31

  32. Thanks for your attention Questions?

More Related