1 / 9

Review of Descriptive Geometry

Review of Descriptive Geometry. Lecture 10. Topics For Today. Quiz – CAEG – AutoCAD Drawing Number 18 is due Lab report due on Wednesday at the beginning of the lab period

lihua
Download Presentation

Review of Descriptive Geometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Review of Descriptive Geometry Lecture 10 Autumn Quarter

  2. Topics For Today • Quiz – CAEG – AutoCAD • Drawing Number 18 is due • Lab report due on Wednesday at the beginning of the lab period • Lab Report – Follow the example, calc. % at each speed, graph in %, use two mph groupings (24 and 25 – avg 24.5) or three mph groupings (24 thru 26 -- avg 25) • Descriptive Geometry • Read BTG Chapter 11 Autumn Quarter

  3. Review from Monday • Lines and planes extend to infinity while we work with a small portion which we define. • Lines and planes can be extended. • Dihedral angle – The angle between two planes – smaller of the two. It can be found by finding the line of intersection and looking at the line of intersection as a point. • Angle between a line and plane – This requires a view in which the plane is an edge and the line is true length. Autumn Quarter

  4. Review from Monday • Downloaded a blank3d template – 4 viewports, 3D construction, world coordinates, cursor tracking – world • Layout mode – Transferring the model to paper – tab at the bottom of screen • The layout and the model or construction mode are all part of one file. Autumn Quarter

  5. Review from Monday • VIEW – Using UCS menu • 3 UCS + plan (enter) (enter) – gives true size of plane • Z UCS + plan (enter) (enter) – gives end view of line which could provide edge view of a plane or a dihedral angle Autumn Quarter

  6. Construction Hint • When you have created a line and then look down the line so the line appears as a point, it disappears in AutoCAD. When you know this is going to happen, place a point (+) at each end of the line. • Save often but don’t overwrite the blank3D file. Autumn Quarter

  7. Key to Descriptive Geometry Top Know the location of the origin (0,0,0) Front Right Side Autumn Quarter

  8. Angle between a line and plane • Required – a view where the line is true length and the plane is an edge • In pencil construction, three auxiliary views are required 1) edge view of plane 2) true size of plane 3) edge view of plane and true length of line • Using the UCS menu and the PLAN command shortens the process Autumn Quarter

  9. Today’s Assignment • Dwg 19 – SGAC-4-1 • Angle between a line and a plane in space • Due at end of class today • Read Handout – steps for solving problems in AutoCAD are provided • Dwg 20 – SGAC-4-2 • Dihedral Angles • Due at beginning of next lecture • Read Handout – steps for solving problems in AutoCAD are provide Autumn Quarter

More Related