1 / 20

Collision Repair

Collision Repair. Hazardous Waste Environmental Compliance. Collision Repair. Hazardous Waste Management – what you need to know What types of waste are generated at a shop? What is a hazardous waste determination? Does Kansas have state-specific requirements?

liam
Download Presentation

Collision Repair

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Collision Repair Hazardous Waste Environmental Compliance Paid for, in part, by the Kansas Department of Health and Environment

  2. Collision Repair Hazardous Waste Management – what you need to know • What types of waste are generated at a shop? • What is a hazardous waste determination? • Does Kansas have state-specific requirements? • How do I store and management my waste? • What are my recycling and disposal options? • How can I minimize waste and save money? 2

  3. Hazardous Waste Regulations You are responsible!! • Each facility or collision repair shop must make a determination for each waste stream to determine if it is a hazardous waste or not. • Perform a written evaluation of each waste. 3

  4. Pause for a moment and think of any waste that is generated at a shop. What are some that you can think of? Paid for, in part, by the Kansas Department of Health and Environment

  5. Waste at a Collision Repair Shop…. • Spent solvents • Waste or excess paints • Paint filters • Paint-related disposable items • Solvent-contaminated rags • Auto fluids • Used oil • Antifreeze • Refrigerant 5

  6. Waste (Spent) Solvents and Paints • Hazardous due to • Ignitability (flash point <140F) • Sometimes toxicity (heavy metals) • Collect in approved container • Label “Hazardous Waste” • Keep it closed • Depending on where the was is stored, it may need to be dated too • Disposal via licensed hazardous waste hauler 6

  7. Spent Filters, Disposable Items, and Rags • Are they hazardous? • MSDS/knowledge of process • Have tested by a certified lab • If filters are hazardous, then cups, paper items are too • Often hazardous and need to be disposed of as such • Look at less hazardous alternatives 7

  8. Auto Fluids – Waste? • Used oil • Return to auto if possible • Collect, label, and recycle by licensed hauler • Antifreeze • Return to the auto • Collect for recycling or disposal as hazardous • Refrigerants • Several restrictions 8

  9. Making a Waste Determination • All businesses must make a “determination” for each waste stream and document whether the waste is a hazardous waste or not. • How do I make a determination? • MSDS/knowledge of process and/or • Test the waste using a certified laboratory Technical guidance document: www.kdheks.gov/waste/techguide/hw-2011-G1.pdf 9

  10. Source: http://www.kdheks.gov/waste/techguide/hw-2011-G1.pdf

  11. Hazardous Waste Generator Categories • Figured on total monthly generation of all hazardous waste sources combined • Conditionally Exempt Small Quantity Generator • Kansas Small Quantity Generator • Small Quantity Generator • Large Quantity Generator 11

  12. Hazardous Waste Regulations • Main requirements • Label – “Hazardous Waste” • Containers, storage, and inspections • Keep it closed • Use a licensed hauler for disposal Technical guidance document: www.kdheks.gov/waste/techguide/HW-2005-G1.pdf 12

  13. Hazardous Waste Regulations • Train your people, it is required! • Within 6 months of taking position and then annually • www.sbeap.org • Keep paperwork for 3 years minimum • Proof of training • Determination documents • Manifests and land disposal restriction (LDR) 13

  14. Pollution Prevention Act of 1990 Shifted the focus from “end-of-pipe” pollution treatment and cleanup, to policies, technologies, and processes which prevent and minimize the generation of pollution” 14

  15. Why Pollution Prevention? • Waste prevention: • Waste reduction • Source of process substitution • Recycling • Final treatment and disposal • Equals benefits: • Financial (front and back end) • Environmental • Worker health and safety • Public image 15

  16. Pollution Prevention OpportunitiesChange the process • Basic housekeeping • Prevention, detection, and cleanup of leaks and spills • Up to 40% of solvent lost here • Store material on pallets or in separate containment area • Use dry cleanup methods • Inventory control • Purchase only what you need 16

  17. Pollution Prevention OpportunitiesChange the material • Consider less hazardous alternatives • Water-based paints • Paints without heavy metals 17

  18. Pollution Prevention OpportunitiesChange the technology • Spray gun equipment • HVLP uses 40-50% less product • Easy cleaning • Solvent recycling or distillation • Greatly reduces raw material purchases • Shops have reduced waste by as much as 80%(source: www.dtsc.ca.gov/PollutionPrevention/ABP/upload/TD_FS_SolventRecycling.pdf) • Decreased air and waste emissions 18

  19. Where to Go for Help • Free, non-regulatory, confidential • KSU PPI, SBEAP (see brochure) • 1-800-578-8898 or www.sbeap.org 19

  20. Helpful Resources • Hazardous Waste Generator Handbook www.kdheks.gov/waste/forms/hazwaste/gen700-HWGenHandbook2011.pdf • Technical Guidance documents www.kdheks.gov/waste/p_techguides.html • SBEAP online training www.sbeap.org/training/course/hazardous-waste 20

More Related