1 / 21

3.1. GEAR UNITS OF PORT MACHINERY DRIVES

3.1. GEAR UNITS OF PORT MACHINERY DRIVES. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES. Main Hoist Gear Unit / STS ratios between 16 - 56 , Super Post-Panamax cranes/ ratio = 16 - 28 3-stage helical gear units ( 4-stage possible if the total CD is otherwise unreasonable to reach)

leslie-cooley
Download Presentation

3.1. GEAR UNITS OF PORT MACHINERY DRIVES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES

  2. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES

  3. Main Hoist Gear Unit / STS ratios between 16 - 56 , Super Post-Panamax cranes/ ratio = 16 - 28 3-stage helical gear units ( 4-stage possible if the total CD is otherwise unreasonable to reach) total shaft center distance between 1200 - 1800 mm high radial forces on HSS / brakes (disc brakes) high radial forces on LSS / rope forces through the drums normally two drums on LSS / throughgoing LSS HSS speed / full load speed between 600 - 1000 rpm / empty load speed between 1500 - 2500 rpm

  4. ISO 6743-9 NLGI2 GREASE NIPPLE rasvaus akselin pyöriessrasvaus akselin pyä greasing when the shaft is rotating bei Nachschmierung welle umdrehen Vid smörjning rotera axeln rasvausväli 4 kk regreasing interval 4 months Fett-Nachschmierungsintervall 4 monaten smörjningsinterval 4 msmånader GREASE AT ASSMBLE SET SCREW DOUBLE LIP SEAL KL█BER SYNTHESO PROBA rasva, asennettaessa grease, at assembly Fett, bei Montierung fett, vid montering MUUTOS/REVISION a) b) c) EUROPEAN PROJ SUHDE/SCALE LASTUAMISTOLERANSSIT MACHINING TOLERANCES 1:2.5 ISO2768-m NIMITYS/NAME P./D. PIIRUSTUS/DRAWING 020311 WXD ASSEMBLY HSS SEAL T./C. 020311 WXD Z0005398 H./A.

  5. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES

  6. Boom Hoist Gear Unit / STS ratios between 80 - 300 , Super Post-Panamax cranes/ ratio = 80 - 160 4-stage helical gear units total shaft center distance between 1000 - 1800 mm high radial forces on HSS / brakes (disc brakes) high radial forces on LSS / rope forces through the drums both one drum and two drums used on LSS HSS speed between 1000 - 2000 rpm

  7. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES

  8. Trolley Travelling Gear Unit / STS ratios between 14 - 100 (depends on trolley design) 2- and 3-stage helical gear units / 2- and 3-stage bevel helical gear units total shaft center distance not important high radial forces on HSS / brakes (disc brakes) radial forces on LSS / rope forces through the drums for machinery trolley gear units bevel-helical units in self-powered trolleys HSS speed between 1000 - 2000 rpm

  9. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES

  10. Gantry Travelling Gear Unit / STS ratios between 35 - 120 3- and 4-stage helical gear units 3- and 4-stage bevel-helical gear units total shaft center distance not important high radial forces on HSS / brakes (disc brakes) high radial forces on LSS if chain&sprocket drive is used HSS speed between 1000 - 2000 rpm

  11. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES RTG - Main Hoist Gear Unit Shanghai Port Machinery Co. 3-stage bevel-helical gear unit

  12. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES • MAIN HOIST / BRAKES Main Hoist Brakes - normal - emergency

  13. 3.1. GEAR UNITS OF PORT MACHINERY DRIVES • BOOM HOIST / BRAKES Boom Hoist Brakes - normal - emergency Boom Hoist Gear Unit 4C560NE

More Related