1 / 26

GLAZING Ceramic and Earthenware

GLAZING Ceramic and Earthenware. Henry Moore. Glazing Steps. Keep bisqueware clean – keep hands clean when glazing Remove all dust from bisqueware before glazing Keep glaze mixed well Apply 2-3 coats of glaze Allow each coat to completely dry before applying next coat

lerato
Download Presentation

GLAZING Ceramic and Earthenware

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GLAZINGCeramic and Earthenware

  2. Henry Moore Glazing Steps • Keep bisqueware clean – keep hands clean when glazing • Remove all dust from bisqueware before glazing • Keep glaze mixed well • Apply 2-3 coats of glaze • Allow each coat to completely dry before applying next coat • DO NOT glaze the bottom (area touching table) • Gloss Glazes: • Apply 2-3 coats – will be glossy • Underglazes: • Apply 2-3 coats – will not be glossy • Apply 2-3 coats of CLEAR gloss glaze on top of underglaze to make it glossy

  3. 4 Types of Glazing

  4. Dipping, Pouring & Spraying • Dip entire piece into glaze • Only 1 coating (1 dip) • Self-levels • Our Hi-fire glazes are dip • Wax the bottom to prevent glazing • Glaze must be mixed well • Use tongs to dip • Cover tong marks with paintbrush & same glaze

  5. Brush Glazing • Wet the bristles of the paintbrush • Mix glaze well • Brush on glaze in 2-3 coats with a paintbrush • Use soft bristle paintbrush • Be sure glaze is on the brush • Never leave brush in the glaze bottle

  6. Gloss Glazes • Glaze is a layer of GLASS on your pottery • Read LABEL to be sure you have the desired color • Shake well with your hand on the lid • 2-3 Coats • Will be glossy when fired • Has some transparency • High areas lighter in color • Deep and textured areas pool glaze and look darker • “moves” like glaze

  7. Before & After Firing • Three coats – let each layer dry in between • Will be chalky when dry • Glaze will change in the kiln – becomes brighter and glossy • Underglaze is not shiny unless clear gloss coated

  8. Gloss Glazes • “Move” and drip like glaze

  9. Gloss Glazes • More likely to drip If :: • Too thick • Overlaps with other glaze

  10. Gloss Glazes – TransparencyAlways check the samples & labels • Transparent Gloss Glazes • Most glosses have some transparency • High areas lighter in color • Deep and textured areas pool glaze and look darker • Opaque Gloss Glaze • Opaque glazes cover evenly – no transparency • Be sure to have amed-high relief texture for interest • Both are good for highly detailed carvings

  11. Gloss GlazesCrystaltex and Special Glazes • Crystaltex Glazes • Gloss glaze with small elements that burst when fired and add color specks • Mix well – chunks settle to bottom of jar • Special Glazes • Textured • Matte • Crackle

  12. Gloss GlazesCrystaltex and Special Glazes • Good for non-detailed, smooth and all-over surfaces • Not good for detailed surfaces – may cover up intended design

  13. Underglazes • Small bottles • 2-3 coats • Will NOT be glossy when fired • Is opaque if enough coats are applied • Must have clear gloss glaze applied if glossiness is desired • 2-3 coats of clear in addition to underglaze

  14. Underglazes • Will not drip – stays where it is painted • Great for :: • Details • Shading • Lettering

  15. Underglazes • Clear glaze MUST be applied to make the glaze glossy • It will cover the entire piece with the clear glaze color – ours is pink

  16. Underglazes • Can overlap dark colors over light colors • Needs 2-3 coats of each color even when overlapping

  17. Glazing Tips

  18. Paper Stencil • Draw/print design on paper and cut out • Lay directly on clay to trace, or glaze over

  19. Light Pencil Drawing • Draw design lightly in pencil on piece – graphite will fire away in kiln

  20. Glazing Defects

  21. Glazing Defects • Crazing • Most common glaze defect • Occurs when glaze cools too fast, or glaze does not fit clay body • “pinging” • Crackle Glaze • sought after

  22. Glazing Defects • Pin holing • Small dots of unglazed areas • Occurs when gasses in the glaze bubble to the surface, pop bubbles and do not heal over • Remedy • Wipe off dust before glazing • Allow glaze to dry completely

  23. Glazing Defects • Blistering • Glaze bubbles like lava on the surface • Occurs when gasses in the glaze bubble to the surface, but do not pop • Remedy • Wipe off dust before glazing • Allow glaze to dry completely

  24. Glazing Defects • Crawling • Glaze pulls together and forms separate droplets on surface • Occurs when there is bad adhesion to the bisque • Remedy • Be sure bisqueware is clean • Do not apply to burnished surfaces

  25. Glazing Defects • Shiver • Glaze pulls away from the surface and cracks off • Occurs when glaze doesn’tshrink as much as the clay • Remedy • Be sure bisqueware is clean

  26. Henry Moore Glazing Steps • Keep bisqueware clean – keep hands clean when glazing • Remove all dust from bisqueware before glazing • Keep glaze mixed well • Apply 2-3 coats of glaze • Allow each coat to completely dry before applying next coat • DO NOT glaze the bottom (area touching table) • Gloss Glazes: • Apply 2-3 coats – will be glossy • Underglazes: • Apply 2-3 coats – will not be glossy • Apply 2-3 coats of CLEAR gloss glaze on top of underglaze to make it glossy

More Related