1 / 30

Richard Vaughan

Getting Connected. Richard Vaughan. We are going to divide this into three sections:. 1 Connecting Radio Aid Equipment to TVs, Videos. 2 Connecting Radio Aid Equipment to Audio Equipment such as Tape recorders, computers, etc.

len-cantu
Download Presentation

Richard Vaughan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Getting Connected Richard Vaughan

  2. We are going to divide this into three sections: 1 Connecting Radio Aid Equipment to TVs, Videos

  3. 2 Connecting Radio Aid Equipment to Audio Equipment such as Tape recorders, computers, etc

  4. 3 Connecting Hearing Aids / Implant Processors to Audio Equipment such as MP3 players, PCs, etc

  5. Connecting Radio Aid Equipment to TVs and Videos

  6. 1st We need a Television

  7. Rear view Then we need to see what connections it has

  8. Headphone socket Then we need to decide which to use The Headphone socket appears to be ideal but it often turns the speakers off when you plug into one. Not much good for other members of the class

  9. Using a SCART socket is preferable because the level of signal is consistent, independent of the volume control and it will not affect the speakers so the rest of the class are happy

  10. Now we need an adaptor

  11. and plug it into the SCART socket

  12. Attach the audio lead to the red and white phono sockets

  13. Lead from SCART adaptor plugs in here The other end plugs directly into the ‘Aux in’ socket of a fmGenie Tx Lead from SCART adaptor plugs in here

  14. To Ext Mic. Socket on Transmitter Lead from SCART adaptor plugs in here On a CRM-220 you need to use a Tx Input Adapter and then the Ext Mic socket on the Transmitter

  15. On a Campus S there is an auxiliary socket in the base of the unit.

  16. There is also a microphone socket under the belt clip but it is difficult to use. Because some 2.5mm plugs are too big to fit into the recess

  17. The SmartLink has both auxiliary and microphone sockets on the adaptor that plugs into the base.

  18. Connecting Radio Aid Equipment to Audio Equipment such as Tape recorders, computers etc

  19. In most instances we will use the headphone socket Some examples

  20. For both the CRM-220 and the fmGenie you will need to use the Tx Input Adapter This is so that you have control over the input level

  21. If you are connecting to a computer With separate:

  22. You will need one of these To split the output

  23. On a laptop The speakers are usually integral so you can only plug straight into the headphone socket

  24. Connecting Hearing Aids / Implant Processors to Audio Equipment such as MP3 players, PCs, etc

  25. Again we will need to use the headphone socket Some examples

  26. This time instead of using the Radio Aid we will connect directly to the hearing aids / processor

  27. Caution with Freedom!

  28. Has a blue plug. Please note that the correct lead Please don’t try to use an fmGenie lead as it won’t work properly

  29. If direct input is not available, we can still use the “T” setting... Silent Headphones Music Link Neck Loop

More Related