1 / 7

Cavity BPM Simulations

Cavity BPM Simulations. A. Liapine. Analysis of the Existing BPMs. BINP. KEK. Analysis of the Existing BPMs. *Q 0 =8600 used for calculation, elsewhere Q 0 =8180. KEK BPM Issues.

leila-marsh
Download Presentation

Cavity BPM Simulations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cavity BPM Simulations A. Liapine

  2. Analysis of the Existing BPMs BINP KEK

  3. Analysis of the Existing BPMs *Q0=8600 used for calculation, elsewhere Q0=8180

  4. KEK BPM Issues • Usual way of simulation: cavity and wg-to-coax adapter are simulated separately to reduce the total computation time and memory consumption • Suggestion (M.Ross): simulate the whole geometry as well for a better understanding • Results are different! – Coax adapter geometry is important…

  5. KEK BPM Issues • Structure is not symmetric, some monopole leakage is possible • Qext is huge, therefore estimating the amplitudes for a unit of the stored energy, then normalizing with shunt impedances A010=5.65 V/m A110=1250 V/m R/Q010=114 Ohm R/Q110=1.26 Ohm Introducing asymmetries: Slot + wg + feedthrough shifted by 0.5 mm: 73 μm Slot shifted by 0.5 mm: 73 μm Feedthrough shifted by 0.5 mm: 63 μm

  6. ATF2 Design • Successor of previous designs • “Longitudinal” design • 4-coupler symmetrical structure • Beam pipe diameter increased to 20 mm to meet the ATF2 beam optics requirements • Increased coupling for a higher sensitivity Qext=13000 • Dipole mode frequency 6426 MHz Monopole leakage: Total waveguide length 20 mm – 500 nm 30 mm or more – leakage is less than computation error Introducing asymmetries (Slot + wg + feedthrough shifted by 0.5 mm, 0.25 mm meshstep) Total waveguide length 30 mm – 40 μm 40 mm – 20 μm 50 mm – 12 μm Check with 0.2 mm meshstep: 50 mm – 10 μm Incline component estimation: 7 μm/mrad

  7. ATF2 Design Bandwidth: 1500 MHz

More Related