Unified-PCMC
This presentation is the property of its rightful owner.
Sponsored Links
1 / 79

Unified-PCMC Ver. 6.0 (TDE/NCP ver. 4.1 support) PowerPoint PPT Presentation


  • 144 Views
  • Uploaded on
  • Presentation posted in: General

Unified-PCMC Ver. 6.0 (TDE/NCP ver. 4.1 support). 2010/Sep/09 First version. UPCMC v6 series. Each version supports the following. V6.0 : KX-TDE600 v4.1 support. V6.1 : Additionally KX-NCP500/1000 v4.1 support. V6.2 : Additionally KX-TDE100/200 v4.1 support. Table of improvements.

Download Presentation

Unified-PCMC Ver. 6.0 (TDE/NCP ver. 4.1 support)

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Unified-PCMC

Ver. 6.0

(TDE/NCP ver. 4.1 support)

2010/Sep/09 First version


Unified pcmc ver 6 0 tde ncp ver 4 1 support

UPCMC v6 series

Each version supports the following.

V6.0 : KX-TDE600 v4.1 support.

V6.1 : Additionally KX-NCP500/1000 v4.1 support.

V6.2 : Additionally KX-TDE100/200 v4.1 support.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Table of improvements


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Changes according to TDE/NCP v4.1 specification

(Expansion of system capacity)


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Changes according to TDE/NCP v4.1 specification

(New/changed system feature settings)


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Operation improvement/specification changes for existing items


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Common tool specification changing

Installer update


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Additional setting


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Improvement Details


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Changes according to TDE/NCP v4.1 specification

(Expansion of system capacity)


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Expansion of IP CO/EXT on MPR (1/3)

1. Support 64 SIP CO channels

TDE100/200/600 & NCP1000 : 32ch(2 card)  64ch(4 card)

NCP500 : 16ch(1 card)  64ch(4 card)

2. Support 32 IP-GW (H.323) channels

NCP500 : 16ch(1 card)  32ch(2 card)

3. Support 128 SIP Extensions

NCP500 : 16ch(1 card)  128ch(4 card)

NCP1000 : 32ch(2 card)  128ch(4 card)

4. Support 16 IP Cell Stations

NCP500/1000 : 8ch(2 card)  16ch(4 card)

From v4.1, the capacity of virtual CO/EXT is same for TDE & NCP.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Expansion of IP CO/EXT on MPR (2/3)

V-SIPGW16 x Max.4

= 64ch

V-IPGW16 x Max.2

= 32ch


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Expansion of IP CO/EXT on MPR (3/3)

V-IPEXT32 x Max.4

= 128ch

V-SIPEXT32 x Max.4

= 128ch

V-IPCS4 x Max.4

= 16ch


Unified pcmc ver 6 0 tde ncp ver 4 1 support

VoIP-DSP option (1/2)

Maximum value of this item was expanded from 53 117 by updating the IPCMPR card hardware.

For the maximum DSP path in the new IPCMPR card,

please refer to the “VoIP Expansion - IP-TSW Speech Path” section

in “KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

VoIP-DSP option (2/2)

Very important notice !!

(1)PCMC cannot identify new/old IPCMPR card!

Old IPCMPR card physically has only max.53 path.

But you can always select 117 for this item if MPR is v4.1.

(2)PCMC does not care about active/inactive of SVM function!

If SVM function is enabled, 4path of DSP is used for it.

So, the available path for BGM becomes 117 – 4 = 113 (old 53 – 4 = 49).

But PCMC always allows you to select 117 if MPR is v4.1.

(3) MPR software of PBX will always try to use DSP path for

BGM of IP-PT by following to the value of this item!

If you program illogical values for this item, you may face

problems.

You must take care about the physical limitations of DSP paths.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support common account for V-SIPGW 64ch (1/3)

Before UPCMC v6.0

You could program Common accounts up to 16ch.

All 16ch had to be in the same V-SIPGW card.

From UPCMC v6.0

You could program Common accounts up to 64ch.

And they do not need to be in thesame V-SIPGW card.

For further information, please refer to the

“VoIP Expansion - 64ch SIP Trunk” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4”

PPT for more details.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support common accounts for V-SIPGW 64ch (2/3)

V-Slot1

When you select the Basic Channel for Additional Channels, you can select from all V-SIPEXT ports, not only ports from the same card.

V-Slot3


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support common account for V-SIPGW 64ch (3/3)

Error message E00010E

Reason for this error

(1) If you select “Not Used” port as the basic channel for additional channels.

(2) If you change a port from “Basic Channel” to “Not Used” while some of

additional channels are selected for that basic channel.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Changes according to TDE/NCP v4.1 specification

(New/Changed system feature settings)


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Centralized VM Transfer (1/2)

Before UPCMC v6.0

You could not use VM Transfer function if you have a

Centralized VM configuration and the VM is not on the same PBX network.

From UPCMC v6.0

You can use VM Transfer function in even if the VM is on a different PBX network.

For more details, please refer to the

“Improved Centralized VM Function” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Centralized VM Transfer (2/2)

VM(DPT) Group – Unit Setting was changed.

The local VM unit which is connected to the same PBX.

(Same as old version)

You can program only the VM Group FN of the same PBX.

The network VM unit which is connected to the other PBX.

New item !

You can program only the dial number to call to the network VM.

NEW!

Max.8digits

(1) The number must match to Other PBX Extension

Example of Floating Extension No. (TIE):

(1) 400 : close numbering plan network

(2) 7 911 4501 : open numbering plan network

(2) The number must start from TIE Access Code


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Parallel Ring for Call Forwarding to CO (1/2)

Before UPCMC v6.0

When Call-FWD(N/A) to CO function is activated, the

extension will automatically stop ringing when call forwarding to the

outside party.

From UPCMC v6.0

As an option, you can keep ringing the extension until the outside party answers the forwarded call.

For more details, please refer to the

“Improved Call-FWD N/A Function” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Parallel Ring for Call Forwarding to CO (2/2)

Extension Setting – FWD/DND tab.

NEW!

By this new setting, you can control this new function extension by extension.

Disable (default) : same as before.

Enable : Keep ringing till the CO party answers.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Conference Group Call(DECT Paging) (1/2)

Before UPCMC v6.0

Broadcast mode setting of Conference Group was System setting.

You could not program Broadcast mode enable/disable for each

Conference Group individually.

From UPCMC v6.0

Broadcast mode setting was moved to the Conference Group setting.

You can program Broadcast mode enable/disable for each

Conference Group individually.

For more details, please refer to the

“Improved Conference Group Function”

and “Paging to DECT” sections in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Conference Group Call(DECT Paging) (2/2)

Old: System Option5

Moved!

&Changed!

New: Conference Group


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Camp-on Transfer (1/2)

Before UPCMC v6.0

Camp-on Transfer (Transfer to busy Extension without BSS Operation)

setting was System setting.

From UPCMC v6.0

Camp-on Transfer setting was moved to the COS setting.

You can program Camp-on Transfer enable/disable for each

COS (thus for each extension) individually.

For more details, please refer to the

“Other Improvements - BSS Operation Programming” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Camp-on Transfer (2/2)

Old: System Option4

Moved!

&Changed!

New: Class of Service – Assistant tab


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Prohibit Auto-answer (1/2)

Before UPCMC v6.0

If the called DPT had set Auto-answer mode for intercom call,

there was no way to make it ring from the calling extension.

From UPCMC v6.0

By using the new item “Automatic Answer (Caller)” in COS, you can override the Auto-answer setting of the called DPT and can

make it ring.

For more details, please refer to the

“Network Feature Enhancement - 23 and

Auto answer enable/disable by COS” sections in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Prohibit Auto-answer (2/2)

New: Class of Service – Assistant tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

After Conference (1/2)

Before UPCMC v6.0

If you want to keep a CO-CO conversation (unattended conference)

after you (DPT) leave a 3rd party conference (CO2-EXT1), you need

to press [CONF] button before you on-hook your handset.

Otherwise, the two CO parties will be disconnected when you on-hook.

From UPCMC v6.0

By using new item “After Conference” of System Option2, you can

start the unattended conference by only on-hooking the handset of your DPT without using [CONF] button.

For more details, please refer to the

“Improved Conference Features” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

After Conference (2/2)

New: System Option – Option2 tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Forced Idle when Hold by PDN/SDN key (1/2)

Before UPCMC v6.0

If you execute HOLD call from a CTI application (such like CA: Communication Assistant) in the

PDN/SDN mode of DPT, DPT causes sound-leakage by keeping the active status of SP-PHONE.

This problem occurs because the call-status of PBX and CTI mismatches the HOLD call

on the PDN/SDN key.

This is known issue of TDE/NCP v3.

From UPCMC v6.0

By using the new item "Forced Idle when Hold by PDN/SDN key", SP-PHONE of DPT is

automatically turned off by the PBX when you execute the HOLD call from the

CTI application. (If the above-mentioned setting is Enable.)

This is also one of the enhancements for TDE/MPR v4.1.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Forced Idle when Hold by PDN/SDN key (2/2)

New: System Option – Option6(CTI) tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

CA Chat (1/2)

Before UPCMC v6.0

We could not stop the Chat function of CA Client.

From UPCMC v6.0

By the new item “CA Chat” in COS Settings, we can prevent

a Chat session from being started by a CA Client.

(We cannot inhibit the receiving of Chat at a CA Client)

For more details, please refer to the

“Improved CA integration” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

CA Chat (2/2)

New: COS Settings – CA tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

CA ICD Group Log Out (1/2)

Before UPCMC v6.0

We could not prevent Logout operation of CA Client.

From UPCMC v6.0

By the new item “CA ICD Group Log Out” in COS Settings, we can

inhibit the Logout operation CA Client.

For more details, please refer to the

“Improved CA integration” section in the

“KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

CA ICD Group Log Out (2/2)

New: COS Settings – CA tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Inform Annex B Status (G.729A) (1/2)

Before UPCMC v6.0

As specification, V-SIPGW does not support G.729 Annex-B.

G.729 Annex-B is “silent suppression” (VAD).

Previously, the information of "Non-supporting" to G.729 Annex-B

was not clearly offered by the SDP of SIP message.

From UPCMC v6.0

By the new item "Inform Annex B Status (G.729A)“ in V-SIPGW

Port property, this information can be offered by the SDP of SIP

message from V-SIPGW if it is set to Enable.

The compatibility of SIP Trunk provider which requests

G.729 Annex-B for the voice codec is improved by this setting.

This is also one of the enhancements for TDE/MPR v4.1.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Inform Annex B Status (G.729A) (2/2)

New: V-SIPGW Port property - Voice/FAX tab

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support Verizon (1/3)

“Verizon” is name of a SIP Trunk Provider in USA.

This provider requested some of the special parameters in SIP

For compatibility with their SIP Server and Services.

For this reason, we added 3 additional settings in

V-SIPGW16 – Port property.

Because “Verizon” is the local provider of USA, this is the

enhancement only for USA.

In World version PCMC, you can not see these additional

3 items.

This is also one of the enhancements for TDE/MPR v4.1.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support Verizon (2/3)

1. Option tab : Diversion header (for Verizon)

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support Verizon (3/3)

2. Calling Party tab : P-Asserted-Identity header

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Send CLIP of Extension Caller (1/2)

Before UPCMC v6.0

CLIP for all forwarded calls had been decided by the setting of

"Send CLIP to CO Caller".

Because the CLIP for the call from extension and from CO were depending on the same setting, contradiction was caused.

From UPCMC v6.0

By adding the new item "Send CLIP of Extension Caller" in

System Option4, we divide the handling of CLIP for the forwarded

call of extension and of CO.

For more details, please refer to the“Call-FWD CLIP” section

in the “KX-TDA/TDE/NPC New Features/Functions Ver.4” PPT.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Send CLIP of Extension Caller (2/2)

New: System Option – Option6(CTI) tab

CLIP for forwarded CO call

NEW!

CLIP for forwarded EXT call


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support 24 Ports Analog Extension Card

HOOK Threshold setting (1/2)

Before UPCMC v6.0

A certain kind of commercial SLT (usually Caller-ID display phone) sometimes uses more current

than a standard SLT intermittently even when idle

Such SLT type is very rare, but we know some of such SLT.

The extension card senses the SLT off-hook via the LPR software, such SLTs

gives too high load for the software by keeping on-hook/off-hook state continuously.

(at this moment, only ECSLC24 is this type of extension card.)

Because of this, the extension card causes extremely slow operation, and it becomes almost impossible

to control the SLT.

We can escape from this problem by not sensing unnecessary off-hook states if we can set higher threshold for the sense of the off-hook of SLT.

Previously, we could not program this threshold from PCMC.

From UPCMC v6.0

We can program this threshold from PCMC.

For ECSLC24(TDE600), we can program 3.0 - 4.0mA (0.1mA interval).

This is also one of the enhancements for TDE/MPR v4.1.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Support 24 Ports Analog Extension Card

HOOK Threshold setting (2/2)

New: Card Property(ECSLC24)

You can set Hook Threshold current for A-Law and Mu-Law codec.

Value ranges are same

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Feature unification between World and US version (1/2)

1. Utility - File Transfer FTP to IP Equipment

NT300 was supported only by US version till the previous UPCMC.

NEW for World version UPCMC


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Feature unification between World and US version (2/2)

2. Maintenance Main – Password tab

System Password for login to PCMC was hidden (in batch mode only) for the reason of security for the personal information.

It was previously supported only by the World version.

NEW for US version UPCMC


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Operation improvement/specification changes of existing items


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of “COS Settings” screen (1/4)

1. The tab names were changed

Old

Renamed

Divided

New


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of “COS Settings” screen (2/4)

2. “Extension Feature”  “Assistant”

Moved to different tab

Moved to different tab

Old

Changed only its position

New

Concept of “Assistant” tab:

Features for call handling assistance

New item

New item


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of “COS Settings” screen (3/4)

3. “Programming & Manager”  “Executive”

Old

Moved from different tab

New

Concept of “Executive” tab:

Features for executive busy override


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of “COS Settings” screen (4/4)

4. “Programming & Manager”  “Manager”

Old

New

Concept of “Manager” tab:

Features for PBX system manager


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Automatic data setting for IPGW

Default Trunk Group# of IPGW was changed from 1 to 7

Changed for easy-programming


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of 4.1.1 Extension Settings (Main)

Shelf/Slot/Port are common items for all the tabs

Old

Fixed common items for all tabs which does not move by horizontal scroll bar

You can see Shelf/Slot/Port on “Main” tab only

New

Fixed common items for all tabs which do not move by horizontal scroll bar


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of 4.1.1/4.2.1 Extension Settings (FWD/DND) (1/2)

1. Extension Settings - FWD/DND tab

Old

Removed

Reference only

Removed

New

Editable

New item


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Rearrangement of 4.1.1/4.2.1 Extension Settings (FWD/DND) (2/2)

2. FWD/DND

Old

New

Removed


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Deletion of "3.11 Air Synchronization Group" screen

Old

Originally we had a plan to allow the multiple groups for Air synchronization.

This setting was for this purpose.

New

But because we give up this plan, we remove this group setting.

Removed


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Air Sync Group in/out from "11.5 Air Synchronization" screen (1/5)

New item

You can Add/Delete and Sort of the IP-CS for Air Synchronization on this screen


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Air Sync Group in/out from "11.5 Air Synchronization" screen (2/5)

1. Add button

Cell Station Addition Wizard

Select

Press  button

to add

Select

Press OK button

to complete

You have to set CS to OUS before adding to the Air Synchronization Group


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Air Sync Group in/out from "11.5 Air Synchronization" screen (3/5)

2. Delete button

Cell Station Deletion Wizard

Select

Press  button

to add

Select

Press OK button

to complete

The necessary connection status for CS deletion is different by the type of CS.

See next page.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

"Connection" value

IPCS, CSI/F, Extension Port?

IPCS, CSI/F

"OUS" or "Fault"

Extension Port

Telephone Type:

"CS-M" or "CS"?

Yes

"OUS"

No

Any "Connection" value (INS/OUS/Fault) is OK.

Air Sync Group in/out from "11.5 Air Synchronization" screen (4/5)

“Connection” value for deletion of CS from Air Synchronization


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Air Sync Group in/out from "11.5 Air Synchronization" screen (5/5)

Default sort = Index order

3. Sort button

Sort button

Toggle switching

Sort button

Sort by the rule “legacy CS first then IP-CS” && “according Shelf/Slot/Port”


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Improvement of NCP Limited

List of the Activated Feature was updated

Old

image

“Reserved-2” was the key for expansion of “NCP Limited” to the normal NCP500.

The name is changed to appropriate description and moved.

“System Capacity Expansion for NCP500X/NCP500V”


Unified pcmc ver 6 0 tde ncp ver 4 1 support

System Option4 – Private Network

The position of “Private Network” section was moved.

Old

New

New item


Unified pcmc ver 6 0 tde ncp ver 4 1 support

TIE Table “Centralized VM” tab -> "Enhanced QSIG"

The description of tab has changed.

Old description was

“Centralized VM”

New

image

Because the controlled feature by this item is not only “Centralized VM” (Network DSS is also controlled), we changed to the appropriate description.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Slot "Activation Key“ item name changed

Because SIP-GW capacity was increased to 64ch, we changed.

Because SIP-GW is not up to 32ch any more, we removed this part.

Old

image


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Common tool specification changes.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

PBX Replacement update (1/2)

1. V4.1 supported

DSYS Converter

PBX Replacement


Unified pcmc ver 6 0 tde ncp ver 4 1 support

PBX Replacement update (2/2)

2. Notification after Convertion/Replacement

NEW!

After finishing of DSYS Convertion or PBX Replacement, you will see this notification dialog.

Currently, the contents of notification is only the “ Extension First digit” timer setting for NT400.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Multi-Site PCMC update (1/2)

1. MSPM - COS data copy

COS data copy is added.

NEW!

NEW!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Multi-Site PCMC update (2/2)

2. Improvement of Demo mode in MSPM

Old

New !

You were seeing License entry screen for Demo mode in old version UPCMC…

UPCMC v6 does not display the illogical License entry screen for Demo mode !!


Unified pcmc ver 6 0 tde ncp ver 4 1 support

PBX Web Manager update (1/3)

1. "Other" language option for PBX Web Manager

NEW!

By editing XML file,you can make any language which is supported by character code UTF-8.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

PBX Web Manager update (2/3)

2. Web Manager - Demo Mode

Old

New !

Demo model selection is moved from “Model” to separated Check-Box.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

PBX Web Manager update (3/3)

3. Web Manager - OGM Name

1: DISA 01

2: DISA 02

3: DISA 03

4: DISA 04

5: DISA 05

6: DISA 06

7: DISA 07

8: DISA 08

9: DISA 09

10: DISA 10

New !

Old

Description of OGM Name becomes more intuitive.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

USB Driver update

Windows7 (32bits/64bits) supporting USB Driver was included in.

Folder structure of USB Driver files in the installer of UPCMC v6

New USB driver for Windows7

PT-USB

KX-T7601

KX-DT301

MPR-USB

KX-TDA

series

Same USB driver of old v2.007

By selecting the proper folder of driver files for your Windows, install the proper USB driver.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Installer Update


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Change Suffix code description (1/2)

NEW!

UC is “Ukraine and Central Asia in CIS”.

This Suffix exists only for TDE600.

On the other hand, TDE600UA does not exist.


Unified pcmc ver 6 0 tde ncp ver 4 1 support

Thank You Very Much

For Your Attention

“ We are Panasonic Family”


  • Login