1 / 3

Pressure losses in ducts

1. Pressure losses in ducts. Pressure losses in ducts. Example for Hsink. Åke Mälhammar Frigus Primore malhammar.ake@wanadoo.fr. Example . 2. Perf plate 2. Fan. Heat sink. Obstacle. Elbow 3. Elbow 2. A c =80 cm 2. Perforated plate 1. A ref =100 cm 2. A c =100 cm 2. A c =30cm 2.

lea
Download Presentation

Pressure losses in ducts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1 Pressure losses in ducts Pressure losses in ducts Example for Hsink Åke Mälhammar Frigus Primore malhammar.ake@wanadoo.fr

  2. Example 2 Perf plate 2 Fan Heat sink Obstacle Elbow 3 Elbow 2 Ac=80 cm2 Perforated plate 1 Aref=100 cm2 Ac=100 cm2 Ac=30cm2 Elbow 1 Ac=75 cm2 Ac=80 cm2 Exclude:Friction [negligible unless (channel length)>10x(channel diameter)]Heat sink [accounted for by program]Fan [accounted for by program] Calculation on next page

  3. Example cont. 3 Comments:Inlet (Coeff=0.3 a default assumption, in most cases <0.5)Elbows (Coeff=1.1 could be up to 1.6 if the velocity profile is mean, Ac=outlet cross section)Perforated plates (Coeff calculated by http://www.frigprim.x10.mx/online/PerfPlate.html)Obstacle (Coeff as perforated plates. Probably lower but better than nothing)Outlet (Coeff=1.0 only lower if there is a diffuser with an opening angle <20 deg) Effective pressure loss coefficient:Calculated as (Item pressure loss coeffefficient)x(Aref/Ac)2

More Related