1 / 41

Flow types

Flow types. Internal External Relative velocity between fluid & object Auto moving through air Water moving against bridge abutment Wind against building. Drag force. Resistance to “forward” motion – push back in direction of fluid flow Depends on Fluid/object velocities

ldawn
Download Presentation

Flow types

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Flow types • Internal • External • Relative velocity between fluid & object • Auto moving through air • Water moving against bridge abutment • Wind against building

  2. Drag force • Resistance to “forward” motion – push back in direction of fluid flow • Depends on • Fluid/object velocities • Fluid properties • Geometry of object • Surface roughness

  3. Drag Forces • Two types • Friction drag: viscous shear effects as flow moves over object surface. Acts parallel to surface • Form drag: affected by geometry of object. Acts perpendicular to object

  4. Drag force • Theory: integrate pressure & shear forces over object surface. • Complex mathematics • Empirical approach

  5. Similitude • Model simulates prototype • Reliance on dimensionless parameters • Reynolds Number • Relative roughness • Drag coefficient - CD

  6. Wind tunnels • Experimental dragdeterminations • Buildings • Ships • Bridge supports/abutments • Vehicles

  7. Wind Tunnel • DC 3 & B 17: about 100 hours of testing • F 15: 20 000 hours of testing

  8. Drag Coefficient • Includes both pressure & friction drags: one usually dominates • Airfoil – friction; viscous shear drag • Auto – pressure; form drag

  9. Drag force • Assume for experimentation • No adjacent surfaces • Free stream velocity uniform & steady • No free surface in fluid

  10. Drag force • Simplification: power to move vehicle on level ground • Rolling friction • Drag force

  11. Vehicles • Early autos – high CD; no concern < 30mph • Higher speeds concerns increased • Advances in metal-forming techniques for improved body designs • Control CD • Fuel costs • Conserve non-renewable resources • Pollution

  12. Vehicles • Nose of auto • Trunk of auto • Surface finish • Discontinuities • Mirrors • Door handles • Wheel wells • Air intakes

  13. Vehicles • Reduced drag vs other factors • Visibility • Passenger accommodation • Aesthetics

  14. Fluid Mechanics Lab • Simple shapes • Disk • Hemisphere • Sphere • Teardrop

  15. Pressure drag • Flat disk • All pressure; no friction drag • Streamline separation → wake; low pressure region. Adverse pressure gradient • P front-to-back

  16. Pressure drag • Sphere • Streamline separation • Wake

  17. Pressure drag • Tear drop – streamline • Reduce separation – farther along surface yields smaller wake • Increase in friction drag; optimum streamline design

  18. Design Process: EWT Models • Photo’s of autos • SolidWorks design • CFD analysis of design: streamlines, CD prediction • 3D printer for models using SolidWorks design • Preparation of models for EWT: surface & mounting • EWT testing: Lab CD vs predicted CD. Agreement within 10%.

  19. Assignment • Chapter 17 up to Section 17.8

More Related