1 / 35

HYDROLOGY - BASIC CONCEPTS

HYDROLOGY - BASIC CONCEPTS. Hydrology Hydrology is the science of the waters of the earth and its atmosphere. It deals with occurrence, circulation, distribution and movements of these waters over the globe and their interaction with the physical and biological environments .

lars
Download Presentation

HYDROLOGY - BASIC CONCEPTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HYDROLOGY - BASIC CONCEPTS • Hydrology Hydrology is the science of the waters of the earth and its atmosphere. It deals with occurrence, circulation, distribution and movements of these waters over the globe and their interaction with the physical and biological environments. • Engineering Hydrology Engineering hydrology is the branch of hydrology which deals with estimation and analysis of water resources and related hydrologic quantities. It also investigates hydrologic problems such as floods and droughts, and develops strategies to mitigate them.

  2. Need for the Hydrologic Studies The need of the hydrologic studies arises mainly from the following hydrologic problems: a. Uncertainty of precipitation and its seasonal occurrence b. Seasonal flow of rivers c. Population growth and rising standards of living, and d. Environmental impacts of development projects

  3. Importance of Hydrology in Civil Engineering • Hydrology has an important role in the design and operation of water resources engineering projects like irrigation, flood control, water supply schemes, hydropower projects and navigation. Many important civil engineering projects have failed because of improper assessment of hydrologic aspects of the projects. Hydraulic structures which are part of very important civil engineering projects and cost billions of Rupees, may fail due to improper hydrologic design. For example, a dam may fail due to inadequate spillway capacity. There may be reservoir operational problems due to lack of hydrologic data like probable inflows, evaporation and seepage.

  4. Importance of Hydrology in Civil Engineering • There might be failure of a bridge or a culvert if its maximum design flood is not estimated properly. Construction of a dam may cause problem for bridges upstream and downstream if proper hydrologic studies regarding floods and erosion downstream are not estimated and taken into account in design. Groundwater studies are important for installation of tube wells and irrigation projects. These are just a few examples which show the importance of hydrologic studies for civil engineering projects.

  5. Major Aspects of Hydrology The main jobs of a hydrologist are collection and analysis of data, and making predictions out of this analysis. i. Collection of Data The hydrologic data comprises: a. Rainfall Data b. Snowfall and Snowmelt Data c. Runoff Data (Catchment Runoff and Stream Flows) d. Topographic Maps, and e. Groundwater Data

  6. ii. Analysis of Data Analysis of hydrologic data includes checking it for consistency and homogeneity as well as finding its various statistical parameters. iii. Prediction Prediction means finding design values and maximum possible floods and droughts. Various approaches for prediction of hydrologic values are: a. Statistical Approach b. Physical Approach c. Deterministic Approach

  7. Sciences Involved Hydrology is a very broad subject and it needs support from allied sciences such as Physics, Mathematics, Geology, Geography, Meteorology, Forestry, Agriculture and Hydraulics. • Major Hydrologic Projects: Engineering Hydrology provides hydrologic data essentially required for a variety of projects, such as: a. Hydraulic Structures like Dams, Bridges, Head-works, Spillways and Culverts etc. b. Hydroelectric Power Generation c. Flood Control Projects d. Irrigation Projects e. Environmental Pollution Control, and f. Planning and Execution of Water Resources Development Projects

  8. Hydrologic Cycle • Journey of water from the ocean to atmosphere and back to the earth and ultimately to the ocean through the processes of evaporation, precipitation, percolation, runoff and return to the ocean is called hydrologic cycle. The importance of hydrologic cycle in hydrology is such that Hydrology is also briefly defined as the science of hydrologic cycle. • Figure 1.1 shows a schematic flow chart of the hydrologic cycle. Though the actual hydrologic cycle is quite complex, this figure just broadly depicts the sequence of major events of the cycle. The hydrologic cycle can be broadly divided into two phases - land phase, and atmospheric phase. Before discussing the two phases of hydrologic cycle, some of the related terms are defined below:

  9. Infiltration: Precipitation falling on the ground is, to some extent, absorbed by the land. This absorption of precipitation water by land from the surface of earth is called infiltration. • Interception: A part of the precipitation is obstructed by vegetation and temporarily remains there. This process is called interception. Later the intercepted water is either evaporated or infiltrated.

  10. Depression Storage A part of precipitation is stored in depressions on the catchment area. This is called depression storage. • Detention Storage When the precipitation occurs for a longer duration and at a rate greater than the rate of infiltration some water is collected on the surface of the earth up to a certain depth. On attaining a certain depth, the action of gravity makes this water flow. Before it starts flowing, the water stored on the surface of earth is called detention storage. • Runoff After the detention storage is built up, as explained above, the water will start flowing over the ground and is called runoff.

  11. Inter Flow The part of infiltrated water which moves laterally through the upper soil layers above the groundwater level and soon joins the stream is called inter flow. • Total Runoff A part of infiltrated water moves in the form of inter flow which soon joins the stream, the remaining portion of infiltrated water percolates to deeper layers of the ground and is stored as groundwater. This groundwater sometimes also joins the stream flow through springs and seepage process. The stream flow is then called the total runoff i. e. it is sum of all the components of precipitation water. Direct runoff plus the losses gives total runoff.

  12. The runoff can be expressed in depth units for a certain area or it can be expressed in volume units. It can also be expressed in discharge units for a specified time. Note that ‘x’ cm of runoff means that water, having ‘x’ cm depth, is spread uniformly over the catchment. Runoff in volume units can be obtained by multiplying the depth with the area of the catchment. Now we come back to explain the hydrologic cycle. • Atmospheric Phase of Hydrologic Cycle Atmospheric phase of hydrologic cycle starts with the formation of clouds after vaporization from water bodies and ends after the occurrence of precipitation.

  13. Land Phase of Hydrologic Cycle After occurrence of precipitation, water comes in contact with the earth surface and hydrologic cycle enters the land phase. Part of precipitation is infiltrated and a part of it, depending upon circumstances, is intercepted by trees and vegetation. If there are depressions in the surface upon which precipitation falls, a part of precipitation will be stored in the depressions in the form of depression storage. All of these parts are liable to vaporization. Rainwater stands on the surface of earth where it falls, after various losses, depending upon the rate of rainfall. When the depth of standing water becomes sufficient it starts flowing over the ground surface in the form of surface runoff.

  14. Land Phase of Hydrologic Cycle During the travel of surface runoff towards streams, again a part of water is infiltrated and a part of it is evaporated. A part of infiltrated water moves laterally through the upper soil layers above the groundwater level, in the form of interflow which soon joins the stream flow. The remaining portion of infiltrated water percolates to deeper layers of the ground and is stored as groundwater. Sometimes this ground water joins the stream flow through spring or seepage process. The stream flow is then called the total runoff. The total runoff from the streams goes back to the oceans subjected to vaporization throughout its travel. The depression storage is either evaporated or infiltrated into the ground and similar is the case of interception. The ground water also may go to oceans after a long time.

  15. Hydrologic Equation The hydrologic equation states that for a given time interval, difference of inflow to and outflow from a system is equal to change of storage of the system. In its differential form it states that rate of volume inflow minus the rate of volume outflow is equal to the rate of change of storage. Mathematically I - O = ∆S / ∆t - - - - - - - - - - - - - - - - 1.1 Where, I = Rate of volume inflow (volume/time), measured in m3/sec, ft3/sec, etc. O = Rate of volume outflow (volume/time) measured in m3/sec, ft3/sec, etc. ∆S / ∆t = Rate of change of storage (‘S’ represents storage and ‘t’ represents Time, hence this is also Volume / time) The above equation is a storage equation which only approximates some hydrologic processes.

  16. Components of Inflow There are two components of inflow, viz. • precipitation over the catchment and reservoir, and • surface or groundwater flow from other catchment areas. Components of Outflow Three components of outflow are: • surface evaporation • groundwater seepage, and • direct runoff i.e. water taken for irrigation or to spill ways for producing power If we fix the time and take the volume units, then the hydrologic equation can be written as, Total volume inflow – The volume outflow = Total change in volume of the system

  17. This is hydrologic or storage equation. It is used in many different ways. If, for example, assuming inflow changes linearly from ‘I1’ to ‘I2’ in time ‘∆t’, the outflow changes linearly from ‘O1’ to ‘O2’ and storage changes from ‘S1’ to ‘S2’ in this time, the equation can be written as: ( I1 + I2 ) / 2 - ( O1 + O2 ) / 2 = ( S2 – S1 ) / ∆t- - ---1.2 If we fix time ‘∆t’ and talk about total inflow in certain time ‘∆t’, total outflow and total change in storage in that time, the hydrologic equation can be written as: Volume inflow - Volume outflow = Total change in storage.

  18. If further, we fix the area of the system (for example, we talk of a catchment) and assume inflow as precipitation ‘p’, the outflow as the losses ‘L’ and runoff ‘R’ then the equation can be written as: • P – L – R = D- - - - - - - - - - - - - - - - - - - - - - 1.3 Where ‘D’ is the depression storage. This concept is further applied to estimate the water budget of a catchment.

  19. Example 1.1 Flow of River Chenab at Marala Barrage varied linearly from 34 cumec (m3/sec) to 283 cumec in 10-hours during a flood. The flow variation at KhankiBarrage, downstream of Marala was observed to be from 28 to 255 cumec during the above mentioned time. Assuming no lateral flow in or out of the reach, find out the rate of change of storage of the river reach between Marala and Khanki. What is total change in storage of the reach in this period?

  20. Solution I1 = 34 cumec I2 = 283 cumec O1 = 28 cumec O2 = 255 cumec I = ( I1 + I2 ) / 2 = ( 34 + 283 ) / 2 = 158.5 cumec O = ( O1 + O2 ) / 2 = ( 28 + 255 ) = 141.5 cumec ∆S / ∆t = ? According to hydrologic equation ( I1 + I2 ) /2 - ( O1 + O2 ) / 2 = ∆S / ∆t 158.5 - 141.5 = ∆S / ∆t = 17 cumec ∆t = 10 hours = 10 x 60 x 60 = 3.6 x 104 sec Total change in storage = ∆S = (∆S / ∆t) x ∆t = 17 x 36,000 = 6.12 x 105 m3

  21. Example 1.2 • Water at a constant rate of 370 cumec was observed to be entering into Tarbela Reservoir in a certain season. If outflow from the reservoir including infiltration and evaporation losses is 280 cumec, find out the change in storage of reservoir for 10 such days. Also convert your answer into Hectare-Meter.

  22. Solution I = 370 cumec O = 280 cumec ΔS = ? According to hydrologic equation, I - O = ΔS / Δt 370 – 280 = ΔS / Δt =90 cumec Δt =10 x 24 = 240 hours = 240 x 60 x 60 = 864x10³ sec Total change in storage = ΔS = (ΔS / Δt) x Δt = 90 x 864x10³ = 777.6x104 m3 = 777.6x104 / 104 = 777.6 Hectare-m

  23. Water Budget in a Catchment • The water budget of a catchment is similar to budget of a country. The water budget in a catchment can be given by hydrologic equation. If we take the inflow as the precipitation ‘P’ on the ground surface , outflow as interception losses ‘Li’, surface runoff ‘R’ and evaporation ‘Le’ and the change in storage due to Infiltration ‘F’ and Depression storage ‘D’, the hydrologic equation is expressed as: P - ( Li + R + Le ) = D + F or R = P - ( Li + Le + D + F ) R = P- The Losses. R = P – L

  24. If all the quantities on right-hand-side of the above equation could be measured, the surface runoff of a given catchment as result of a known precipitation could easily be determined. But unfortunately, it is very difficult to get these values directly. The hydrologists have therefore evolved a number of direct and indirect techniques to find the rainfall - runoff relationship described by the above equation.

  25. Example 1.3 • A precipitation measuring 125 mm occurred over a catchment. If the infiltration, interception, depression storage and other losses are 50 mm, find direct runoff and total runoff.

  26. Solution Precipitation P = 125 mm Losses L = 50 mm Direct runoff (DRO) = P – L = 125 – 50 = 75 mm Total runoff = DRO + L = 75+50 = 125 mm

  27. Example 1.4 • A part of catchment area of Hub River measuring 78 km² received 100 mm of rainfall in 3 hours due to a storm. A drainage stream joins this part of catchment to the Hub River. The stream was dry before rainfall and there was flow in the stream for a period of 2.5 days with an average discharge of 10 cumec. After the storm runoff, the stream again became dry. Find the losses, direct runoff and total runoff in cumec and Hectare-meter.

  28. Solution According to hydrologic equation, Area of Catchment ‘A’ = 78 km2 =78x106 m2 P = 100 mm =0.1 m Q = 10 m3/sec t = 2.5 days = 2.5 x 24 x 60 x 60 sec Total Runoff = P x A = ( 0.1 ) x 78 x 106 = 7.8 x106m3 = 7.8 x 106 / 104 = 780 Hectare-m DRO = 10 x 2.5 x 24 x 60 x 60 = 2.16x106 m3 = 216 Hectare-m Losses ‘L’ = P - R = 7.8 x 106 - 2.16 x 106 = 5.64 x 106m3 = 564 Hectare-m

  29. Example 1.5 • Assume that Mangla Reservoir has surface area of 39 sq. km in the beginning of a certain month and the water depth is 76.20 m for this whole surface of the lake. Further assume that sides of reservoir are nearly vertical. The reservoir received an average inflow of 226.50 cumec as a direct runoff in the same month, and direct precipitation of 125 mm. The outflow from the reservoir was 170 cumec and evaporation and seepage losses were estimated to be 113 mm during the month. Find out depth of reservoir at the end of that month and total increase or decrease in the storage.

  30. Solution The hydrologic equation will be applied to solve this water budget related problem. Δt= 1 month = 30 x 24 x 60 x 60 = 2.592x106 sec. Total inflow as direct runoff = I x Δt = 226.50 x 2.592x106m3 = 587.088x106 m³ Addition from precipitation = precipitation x surface area of reservoir = (125/10³)x39x106 = 4.875x106 m3 Total outflow = O x Δt = 170 x 2.592x106 = 440.64x106 m3 Losses = ( Evaporation + Seepage ) x Surface area of reservoir = (113/10³) x 39 x 106 = 4.407 x 106 m3

  31. Now the total change in volume of storage = total volume of inflow + total volume of precipitation – ( total volume of outflow + total volume of losses ) =587.088 x 106 + 4.875 x 106 – ( 440.64 x 106 + 4.407 x 106 ) = 146.916 x 106 m3 Change in depth of reservoir = change in storage / surface area = 146.916 x 106 / 39 x 106 = 3.77 m Depth at the end of month = depth in the beginning + change in depth = 76.20 + 3.77 = 79.97 m

  32. EXERCISE • During July, 1996 monthly inflow to Tarbela Reservoir was 20 billion cubic meters and outflow was 18.70 billion cubic meters. Find the rate of change of storage and change in storage during the period. • At Basha Reservoir the storage volume is 11,410 million cubic meters at elevation of 1,180 m. If inflow is 11,500 cubic meters per second. Find the time to fill the reservoir up to mentioned elevation. Assume that losses are negligible.

  33. EXERCISE • Mangla Lake had a water surface level of 650 m above a datum at the beginning of a certain month. In that month the lake received an average inflow of 250 cumecs. There was an outflow of 150 cumecs. In the same month, the lake received a rainfall of 150 mm and the evaporation from the lake surface was 5 cm. Using hydrologic equation, estimate the water surface elevation of the lake at the end of the month. Assume the lake surface area as 450 hectares and that there was no contribution to or from the groundwater storage.

  34. EXERCISE • A catchment area of 100 Sq. Km. in Gilgit received a rainfall of 12 cm from a 3-hours storm. At the outlet of the catchment, a natural stream had a steady flow of 10 cumecs before the storm and experienced a runoff lasting for 20 hours with an average discharge value of 90 cumecs. The stream was again to its original steady state with a flow of 10 cumecs. Estimate the losses and ratio of runoff to precipitation.

More Related