Changes for 2008 lighting standards
Download
1 / 222

Changes for 2008 Lighting Standards - PowerPoint PPT Presentation


  • 356 Views
  • Uploaded on

Changes for “2008” Lighting Standards. California Energy Commission Modifications made by Jay Salazar. Introduction. This Seminar covers the Residential and Nonresidential 2008 energy Standard Changes to the LIGHTING REQUIREMENTS. There are several units lasting about 40 minutes each.

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'Changes for 2008 Lighting Standards' - laqueta


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
Changes for 2008 lighting standards l.jpg

Changes for “2008” Lighting Standards

California Energy Commission

Modifications made by Jay Salazar


Introduction l.jpg
Introduction

  • This Seminar covers the Residential and Nonresidential 2008 energy Standard Changes to the LIGHTING REQUIREMENTS.

  • There are several units lasting about 40 minutes each.


Introduction3 l.jpg
Introduction

  • This seminar requires that

    • Participate in the presentation

    • Work practical problems

  • Questions on the slides are welcome at any time. This is not a class of interpretation or general energy.


Introduction4 l.jpg
Introduction

  • By the end of this seminar you will

    • Be introduced to the energy website

    • Know when the new 2008 standards go into effect.

    • Recite verbally the major Lighting sections that are changed with the new 2008 Energy Standards

    • Identify the new Residential and Nonresidential 2008 Energy forms for Plan Check and Inspection forms


Introduction5 l.jpg

Know how to apply the new Residential 2008 Energy Lighting forms

Know How to apply the new Non-Residential 2008 energy Forms

Know what sections in the Energy Standards change with respect to lighting

Know the new sign requirements

Know the new outdoor lighting requirements

Review new definitions

Introduction


How can i participate l.jpg
How Can I Participate? forms

www.energy.ca.gov

List Servers Sign-Up

Click on Links-

http://www.energy.ca.gov/listservers/index.html

Enter your name & e-mail address

Then click on subscribe and click the box for the list(s) you wish to subscribe to. EFFICIENCY LISTS include:

Appliance Efficiency Standards

Blueprint - Title 24 Newsletter

Energy Efficiency Building Standards (Title 24)


Where are the standards and the res and nonres manuals l.jpg
Where are the Standards And the Res and Nonres Manuals forms

http://www.energy.ca.gov/title24/2008standards/index.html



Slide10 l.jpg

Title 24 - 2008 forms

General Information


Slide11 l.jpg

Major Changes to the Lighting Energy Standards: forms

When they go into effect

All new lighting Forms

CHANGES TO SOME DEFINITIONS

Changes to LTGC and LTGA FORMS-NONRES

Changes to the CF6R Form-RES

Illuminated Signs have a separate energy review.

Outdoor Lighting Plan Review has been Changed.

2008 Title 24 Energy Standards


2008 title 24 energy standards l.jpg
2008 Title 24 Energy Standards forms

The Forms are tied directly to the MAJORITY OF changes

  • If you understand the forms you will understand those changes that affect Permit Technician , Plan Review and Inspector activities.

  • The forms are for the Permit Tech, Plan reviewer and Inspector.

  • Energy Staff have worked and will continue to work on providing simplified forms.


Changes to 2008 title 24 residential lighting standards l.jpg

Changes to 2008 Title 24 formsResidential Lighting Standards


Slide14 l.jpg

Adopted forms

April 23, 2008 by the State

Effective

August 1, 2009

For building permit applications submitted on or after August 1, 2009

2008 Title 24 Energy Standards


Slide15 l.jpg

Lighting -RES forms

  • Where stuff is for low rise Residential Lighting:

    • 2008 Energy Standards

      • Section 150(k) Mandatory

      • Section 151(a,f/a-e) Pers/Perfrom pg 144

      • Section 152 Add/Alts

      • Section 119 controls,bal,lum


Slide16 l.jpg

Lighting -RES forms

  • You know its low rise residential if it is section 150, 151, or 152 in the 2008 Standards add 119 for controls, ballasts Luminaries.

  • Definitions related to the Standards are in Section 101


Slide17 l.jpg

DEFINITIONS § 101 forms(Residential Space Type)



Slide19 l.jpg

The New CF-6R-LTG-01 to the Form-RES forms

  • Has 8 Sections that act like a check list and declaration the applicant must check off and turn in to the Inspector prior to the final inspection.

  • The CF6R-LTG-01 is intended as a declaration by the installer BUT

  • Permit Techs and counter staff should go over the form at the time of application submittal with Owner/Builder applicants or residential remodel contractors.


Slide20 l.jpg

The New CF-6R-LTG-01 to the Form-RES forms-8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings




Slide23 l.jpg

Changes to the CF6R Form-RES forms

  • Start with Kitchen Lighting

    • Permit Technicians or Plan Reviewers make sure the applicable boxes are checked Off.





Slide27 l.jpg

Changes to the CF6R Form-RES forms

  • Start with Kitchen Lighting must comply with options (a),(b),or (c)


Slide28 l.jpg

Changes to the CF6R Form-RES forms

  • Start with Kitchen Lighting

    • Permit Technicians or Plan Reviewers make sure the applicable boxes are checked Off when dealing with Owner/Builders or Remodel contractors but let Architects and energy consultants have the installer declare. .


Slide29 l.jpg

Changes to the CF6R Form-RES-What happens if less than 50% forms

  • Permit Tech and Plan Reviewers use option (c)

  • Remember if you use ( c) then

    • Additional kitchen low efficacy lighting (50 watts or 100 watts ) is available only if all of the following are true:

    • 􀂆 Yes. All low efficacy luminaires in the kitchen are controlled by a vacancy sensor, dimmer, energy management control system (EMCS), or a multi-scene programmable control system.

    • 􀂆 Yes. Permanently installed luminaires in garages, laundry rooms and utility rooms are high efficacy luminaires AND are controlled by a vacancy sensor



High efficacy luminaires 150 k l.jpg

High Efficacy Luminaires § 150(k) forms

  • T24 requires ALL luminaires installed in RESIDENTIAL applications must be classified as high efficacy or low efficacy

  • T24 does not require luminaires installed in nonresidential applications to be classified as high efficacy or low efficacy



Slide35 l.jpg

Changes to the CF6R Form-RES forms

  • Always High Efficacy

    • Fluorescent (no screws) ( 13W or over needs electronic ballast)

    • Metal Halide

    • High Pressure Sodium

  • Always Low Efficacy

    • Incandescent

    • Mercury Vapor

  • LED’s must be considered low Efficacy unless they are Certified by CEC



Slide38 l.jpg

HID Luminaires (typically metal halide or high pressure sodium)

UL listed by the manufacturer as HID luminaires

Must be manufactured with an HID ballast integral to the luminaire

May have HID rated screw-based sockets which are not incandescent sockets



This is a medium screw base socket l.jpg
This is a medium screw base socket sodium)

LOW EFFICACY

LOW EFFICACY


Slide41 l.jpg

This is a GU 24 Socket sodium)

LOW EFFICACY



How to determine high efficacy 150 k use total system watts for led lighting l.jpg

How to Determine High Efficacy § 150(k) sodium) Use total system watts for LED lighting .



Slide45 l.jpg

The New CF-6R-LTG-01 to the Form-RES sodium) -8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings


Slide46 l.jpg

Changes to the CF6R Form-RES sodium) section 2

  • Cabinets with internal illumination



Internally illuminated cabinets l.jpg

Internally Illuminated Cabinets sodium)

You may use either the width of the cabinet section or the height of the glazing per cabinet section, regardless of the number of shelves or doors on the cabinet. 


Slide49 l.jpg

The New CF-6R-LTG-01 to the Form-RES sodium) -8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings


Slide50 l.jpg

Changes to the CF6R Form-RES sodium) Section 3

  • Must be certified at

  • http://www.energy.ca.gov/appliances/database/excel_based_files/Lighting/


Slide51 l.jpg

The New CF-6R-LTG-01 to the Form-RES sodium) -8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings


Slide52 l.jpg

Changes to the CF6R Form-RES sodium) Section 4 Lighting Controls



Slide54 l.jpg

Changes to the CF6R Form-RES sodium) Section 4 Lighting Controls

4. Lighting Controls Complete section 4

􀂆 Yes 􀂆 NA §150(k)7A: Permanently installed low efficacy luminaires are controlled by switches separate from those controlling high efficacy luminaires.

􀂆 Yes 􀂆 NA §150(k)7B: Exhaust fans with integral lighting systems are switched separately from lighting systems, OR have a lighting system that can be manually turned on and off while allowing the fan to continue to operate for an extended period of time.


Slide55 l.jpg

Changes to the CF6R Form-RES sodium) Section 4 Lighting Controls

􀂆 Yes 􀂆 NA §150(k)7C: All permanently installed luminaires are switched with readily accessible controls that permit the luminaires to be manually switched on and off.

􀂆 Yes 􀂆 NA §150(k)7D: All lighting controls have been installed in accordance with the manufacturer’s instructions.

􀂆 Yes 􀂆 NA §150(k)7E: All lighting circuits that are controlled by more than one switch, where a dimmer or vacancy sensor has been installed to comply with §150(k), no controls bypass the dimmer or vacancy sensor functions.


Slide56 l.jpg

The New CF-6R-LTG-01 to the Form-RES sodium) -8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings


Slide57 l.jpg

Changes to the CF6R Form-RES sodium) Section 5 Luminaires




Slide60 l.jpg

Changes to the CF6R Form-RES sodium) Section 5 Luminaires

  • Any electrical box finished with a blank cover or where no electrical equipment has been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, has been treated as low efficacy luminaires for compliance with §150(k).


Slide61 l.jpg

Changes to the CF6R Form-RES sodium) Section 5 Recessed luminaires

  • To qualify as high efficacy recessed must be certified

  • http://www.energy.ca.gov/appliances/database/excel_based_files/Lighting/





Slide65 l.jpg

The New CF-6R-LTG-01 to the Form-RES sodium) -8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings



The new cf 6r ltg 01 to the form res section 6 indoor lighting67 l.jpg
The New CF-6R-LTG-01 to the Form-RES Section 6 Indoor lighting

Does the project include permanently installed luminaires in any room that is not a kitchen?

Yes, complete section 6 􀂆 No, go on to section 7

Yes 􀂆 NA §150(k)10: Permanently installed luminaires in bathrooms, garages, laundry rooms, closets > 70 ft2, and utility rooms are high efficacy luminaires OR are controlled by a vacancy sensor.

Yes 􀂆 NA §150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms are high efficacy luminaires, OR are controlled by a dimmer switch OR are controlled by a vacancy sensor.


Slide68 l.jpg

DEFINITIONS § 101 lighting(Residential Space Type)


Slide69 l.jpg

DEFINITIONS § 101 lighting(Residential Space Type)


Slide70 l.jpg

DEFINITIONS § 101 lighting(Residential Space Type)





Slide74 l.jpg

The New CF-6R-LTG-01 to the Form-RES lighting-8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings






Slide79 l.jpg

The New CF-6R-LTG-01 to the Form-RES lighting-8 Sections

  • Kitchen Lighting

  • Lighting Internal to Cabinets

  • Installed Devices and Components Have Been Certified to the Energy Commission

  • Lighting Controls

  • Luminaires (Lighting Fixtures)

  • Indoor Lighting (any indoor room that is not a kitchen)

  • Outdoor Lighting

  • Common areas of low-rise residential buildings





Slide83 l.jpg

Lighting –NON RES lighting

Where stuff is for Non Res, High Rise Re, and Hotel and motel Lighting:

  • 2008 Energy Standards

  • 4 major sections to Non res

    • Indoor Lighting conditioned space

    • Indoor lighting unconditioned space

    • Outdoor lighting

    • Indoor and outdoor Signs


Slide84 l.jpg

Lighting –NON RES-CON lighting

1. Indoor Lighting Controls

  • Where stuff is for Non Res, High Rise Re, and Hotel and motel Lighting:

    • 2008 Energy Standards

      1. Indoor lighting conditioned, process spaces

      Sections 119,130,131,134 Mandatory

      Section 143 (c ) 146 Prescriptive

      Section 141 Performance

      Section 149 Additions Alterations


Slide85 l.jpg

Lighting –NON RES UNCON lighting

2. Indoor Lighting Controls

  • Where stuff is for Non Res, High Rise Re, and Hotel and motel Lighting:

    • 2008 Energy Standards

      2. Indoor lighting unconditioned spaces

      Sections 119,130,131,134 Mandatory

      Section 143(c ) , 146 Prescriptive

      N/A Performance

      Section 149 Additions Alterations


Slide86 l.jpg

Lighting –NON RES lighting

3. Outdoor Lighting

Where stuff is for Non Res, High Rise Re, and Hotel and motel Lighting:

  • 2008 Energy Standards

    3. Outdoor Lighting

    Sections 119,130,132,134 Mandatory

    Section 147 Prescriptive

    N/A Performance

    Section 149 Additions Alterations


Slide87 l.jpg

Lighting –NON RES lighting

4. Indoor/Outdoor Signs

Where stuff is for Non Res, High Rise Re, and Hotel and motel Lighting:

  • 2008 Energy Standards

    4. Indoor /outdoor Signs

    Sections 130,133 Mandatory

    Section 148 Prescriptive

    N/A Performance

    Section 149 Additions Alterations


Lighting non res changes to the forms l.jpg
Lighting –NON RES Changes to the Forms lighting

  • Forms are found in the Nonresidential Manual, Appendix A Compliance Forms and Worksheets.

  • ENV-1A, LTG-1A, OTLG -1A, MECH-1A, are no longer used and have been deleted.

  • 2005 - 16 Forms 2008 – 14 Forms




Slide91 l.jpg

Non Res Forms Inspectors lighting

Inspection Staff

Use the Following

  • LTG-1-C Inspection checklist

  • FIELD INSPECTION ENERGY CHECKLIST

    Verify the following:

  • LGT-INST Indoor lighting Installation certificate

  • OTLG-INST Outdoor Lighting Installation Certificate

  • SLTG-INST Sign Installation Certificate

  • LTG-2-A Lighting Control Acceptance Doc

  • OLTG-2-A Outdoor Lighting Control Acceptance Doc


Ltg 1 c form l.jpg
LTG-1-C Form lighting

  • Page 2 of 4 Indoor lighting Schedule.

  • Page 2 of 4 also serves as a Field Inspection Energy Checklist, which is to be utilized by the enforcement agency.

  • The Field Inspector verifies at the end of installation that the LTG-1-INST and the appropriate Certificates of Acceptance have been completed.

  • The Field Inspector also verifies that lighting schedule describes what was installed and checks the appropriate box in column H.



Slide94 l.jpg

Non Res Forms lightingPlan Reviewers


Slide95 l.jpg

Non Res Forms Plan Review lighting

Plan Review

LTG-1C Pages 1 through 4 Certificate of Compliance. All Pages required on plans for all submittals.

LTG-2C Lighting Controls Credit Worksheet

LTG-3C Indoor Lighting Power Allowance

LTG-4C Pages 1 through 4 Tailored Method Worksheet

LTG-5C Pages 1 and 2 Line Voltage Track Lighting Worksheet


Slide96 l.jpg

Non Res Forms lightingPlan Reviewers

  • LTG-1-C Form

    • Step 1 -Check that the form is filled out.


Non res forms plan reviewers l.jpg
Non Res Forms lightingPlan Reviewers

  • Separate forms required for conditioned and unconditioned spaces.

  • Additions are when the new conditioned space is created.


Slide98 l.jpg

Lighting –NON RES lighting

2008 Energy Standards

  • 4 major sections to Non res

    • Indoor Lighting conditioned space

    • Indoor lighting unconditioned space

    • Outdoor lighting

    • Indoor and outdoor Signs

      ALL 4 ARE AFFECTED BY THE LIGHTING CONTROLS SECTIONS 119, 130 and 131


Nonresidential indoor lighting controls l.jpg

Nonresidential lightingIndoor Lighting Controls


Lighting control devices l.jpg
Lighting Control Devices lighting

  • MUST BE CERTIFIED

    http://www.energy.ca.gov/appliances/database/excel_based_files/Lighting/

    Or

    who you gonna call?
















Nonresidential indoor lighting controls done l.jpg

Nonresidential lightingIndoor Lighting ControlsDONE!!


Slide116 l.jpg

Lighting –NON RES lighting

2008 Energy Standards

  • 4 major sections to Non res

    • Indoor Lighting conditioned space

    • Indoor lighting unconditioned space

    • Outdoor lighting

    • Indoor and outdoor Signs


Nonresidential indoor lighting requirements l.jpg

Nonresidential lightingIndoor Lighting Requirements


Slide118 l.jpg

Non Res Forms lightingPlan Reviewers











Slide128 l.jpg

Nonresidential Indoor Lighting §146 lighting

Complete Building Method

  • Added: may be used for tenant space where one type of use makes up 90 percent of the space

  • Retail and wholesale stores, hotel/motel, and high-rise residential buildings shall not use this method.

  • May be used for combined building where there is a Parking Garage + another complete building category

    • Parking garage portion and remaining portion shall each separately qualify for and use categories from Table


Slide129 l.jpg

Nonresidential Indoor Lighting §146 lighting

Tailored Method

  • Displays installed against a wall shall not qualify for the floor display lighting power allowances.

  • Floor displays shall not qualify for the wall display allowances.

  • Permanent full height partitions shall extend from the floor to within 2 feet of the ceiling or are taller than 10 feet, and are permanently anchored to the floor.

    • Commercial and industrial storage stacks are not classified as permanent full height partitions.


Slide130 l.jpg

Nonresidential Indoor Lighting §146 lighting

Tailored Method

  • Qualifying wall lighting systems shall be mounted within sixten feet of wall

  • Qualifying floor display lighting systems shall be mounted no closer than sixtwo feet to a wall and

  • In retail merchandise sales, museum, and religious worship, the lighting power for very valuable displays cases

    • Removed from Tailored Method table and inserted into text

      Smallest of:

    • Area of space times 1.0 W/ft2, or

    • Area display case times 16 W/ft2, or

    • Actual power




Nonresidential daylighting part of indoor lighting l.jpg

Nonresidential lightingDaylighting part of Indoor lighting


Slide134 l.jpg

Day lighting BIG Changes –NON RES lighting

  • NO MORE 15 FOOT DEPTH

  • Basically the Daylit Depth is the height of the window

  • Depth is determined by the height of the window, or distance to the nearest 5 foot high vertical obstruction.

  • Introduction of a Secondary Daylit area

  • Daylit areas must be shown on the plans


Definition primary and secondary sidelit area still 250 sf or more auto controls at 2500 sf l.jpg
Definition lightingPrimary and Secondary Sidelit AreaStill 250 SF OR MORE Auto controls at 2500 SF

h

Primary

Secondary

1 X h

2 X h


Slide136 l.jpg

Daylighting –NON RES lighting

AB switching No credit

Controls get credits in the Secondary area




Alterations skylights 149 b no daylighting control when you add skylight for alterations l.jpg

Alterations – Skylights §149(b) lightingNo daylighting control when you add skylight for alterations

  • Adding skylights to existing buildings:

  • When §131(c)2 triggered by addition of skylights to existing building

  • And lighting system is not re-circuited

  • Daylighting control need not meet multi-level requirements in Section 131(c)2A.


Slide140 l.jpg

Lighting –NON RES lighting

2008 Energy Standards

  • 4 major sections to Non res

    • Indoor Lighting conditioned space

    • Indoor lighting unconditioned space

    • Outdoor lighting

    • Indoor and outdoor Signs


Nonresidential outdoor lighting l.jpg

Nonresidential lightingOutdoorLighting


Four outdoor lighting zones l.jpg
Four Outdoor Lighting Zones lighting

  • The Energy Commission sets statewide default Lighting Zones

    http://www.energy.ca.gov/title24/2005standards/outdoor_lighting/

  • However, the jurisdictions (usually a city or county), may change the zones to accommodate local conditions.

  • Follow a formal public process

  • File changes with Energy Commission


Outdoor lighting zones l.jpg
Outdoor Lighting Zones lighting

LZ1 Darkest

  • Government designated parks, recreation areas, and wildlife preserves

    LZ2 Low

  • Rural areas, as defined by the most recent US Census

    LZ3 Mid

  • Urban areas, as defined by the most recent US Census

    LZ4 Highest


As of today l.jpg
AS OF TODAY… lighting

There are still

NO OLZ 4’s

in California


Outdoor luminaire cutoff requirement 132 l.jpg
Outdoor Luminaire Cutoff Requirement (132) lighting

  • Hardscape Areas

    • Parking lots

    • Building entrances

    • Canopies

    • Outdoor sales areas

  • > 175 Watts

  • Must be IESNA Cutoff (full cutoff also complies)

    • Must take into account mounting at a tilt


Lighting devices l.jpg
Lighting Devices lighting

  • MUST BE CERTIFIED

    http://www.energy.ca.gov/appliances/database/excel_based_files/Lighting/

    Or

    who you gonna call?


Slide148 l.jpg

< 2.5 % lighting

Plumb line

Full Cutoff

Cutoff

< 5 %

≥ 5 %

Semi-Cutoff

Non-Cutoff


Slide149 l.jpg

> 2.5 % ? lighting

Plumb line

Non-Compliant Full Cutoff


132 outdoor lighting controls l.jpg
§ 132 Outdoor Lighting Controls lighting

Existing exceptions to outdoor luminaire cutoff:

  • Building facades, public monuments, statues, and vertical surfaces of bridges

  • Required by health or life safety statue, ordinance, or regulations

  • Temporary outdoor lighting

  • Used around water subject to Article 680 of CEC


132 outdoor lighting controls151 l.jpg
§ 132 Outdoor Lighting Controls lighting

New exception to outdoor luminaire cutoff:

  • Replacement of existing pole mounted luminaires in hardscape areas meeting all of the following conditions:

    • Existing luminaire not cutoff; and

    • Spacing between existing poles is greater than six times the mounting height of the existing luminaires; and

    • No additional poles added to the site; and

    • No new wiring to the luminaires; and

    • Connected lighting power wattage not increased


Motion sensors on inefficient lighting technologies l.jpg
Motion Sensors on inefficient lighting technologies lighting

If luminaire rated for over 100 watt lamp, shall have either:

  • Lamp efficacy of 60 lumens per watt

  • Or controlled by motion sensor

    • Do not want Mercury Vapor

    • Use metal halide. High pressure sodium or flourescent.


132 outdoor lighting controls153 l.jpg
§ 132 Outdoor Lighting Controls lighting

Exceptions to motion sensors

  • Required by health or life safety statue, ordinance, or regulations

  • Used around water subject to Article 680 of CEC

  • Searchlights

  • Theme lighting used in theme parks

  • For film and live performances

  • Temporary

  • LED, light emitting capacitors, neon, cold cathode

  • Sign


Multi level switching l.jpg
Multi-Level Switching lighting

  • Give owner ability to automatically turn off ≥50% to ≤ 80%

    • Building facades

    • Parking lots

    • Garages

    • Canopies

    • Outdoor Sales Areas

    • Student pick-up/drop-off zones


134 nonresidential lighting controls acceptance l.jpg
§ 134 Nonresidential Lighting Controls Acceptance lighting

  • In 2005, Lighting Control Acceptance only applied to nonresidential indoor lighting controls

  • In 2008, added: Certified that outdoor lighting controls shall meet the requirements of §119 and 132.


Slide156 l.jpg

Non Res Forms lightingPlan Reviewers


Slide157 l.jpg

Non Res Forms lightingPlan Reviewers

  • 3 areas or layers to check out door power density

  • LAYERS

    • Illuminated Hardscape Wattage per SF

    • Linear Wattage per LF

    • Initial Wattage


147 outdoor lighting l.jpg
§ 147 Outdoor Lighting lighting

Illuminated hardscape means:

  • Square pattern ten times the luminaire mounting height with the luminaire in the middle of the pattern

  • Shall not go beyond hardscape border or into buildings

  • No double counting of any areas

  • Hardscape areas which are not illuminated shall not be included in total square feet of site hardscape

  • Solar powered lighting, or other “off the grid” lighting is not exempt from Title 24, Part 6


Slide159 l.jpg

117 ft lighting

108 ft

25 ft high

luminaires


Illuminated area l.jpg
Illuminated Area lighting

30 feet

150 feet

150 feet

Not to Scale


Illuminated area161 l.jpg
Illuminated Area lighting

16 feet

30 feet

150 feet

80 feet

80 feet

150 feet

Not to Scale


Illuminated area162 l.jpg
Illuminated Area lighting

16 feet

30 feet

Area NOT

illuminated

150 feet

80 feet

150 feet

Not to Scale


Illuminated area163 l.jpg
Illuminated Area lighting

Parking

Lot


Illuminated area164 l.jpg
Illuminated Area lighting

Parking

Lot

This area is not illuminated


Illuminated area165 l.jpg
Illuminated Area lighting

Do not count area within square pattern that is beyond the paved area

This area is not illuminated


147 outdoor lighting exceptions l.jpg
§ 147 Outdoor Lighting Exceptions lighting

EXCEPTIONS to Section 147: When ≥ 50% light from luminaire falls on one or more of the following applications, the lighting power for that luminaire shall be exempt from Section 147(b):

  • Lighting specifically for Automated Teller Machine as required by California Financial Code Section 13040, or required by law through a local ordinance

  • Lighting of tunnels, bridges, stairs, wheelchair elevator lifts for American with Disabilities Act (ADA) compliance, and ramps that are other than parking garage ramps.

  • In theme parks: outdoor lighting for themes and special effects

  • Lighting for outdoor theatrical and other outdoor live performances, provided additions to area lighting systems and controlled by a multiscene or theatrical cross-fade control station accessible only to authorized operators

  • Outdoor lighting systems for qualified historic buildings if they consist solely of historic lighting components or replicas of historic lighting components


147 outdoor lighting exceptions continued l.jpg
§ 147 Outdoor Lighting Exceptions (continued) lighting

  • Temporary

  • Required FAA and Coast Guard

  • Public Streets, roadways, highways, traffic signage

  • Sports, athletic fields, children’s playgrounds

  • Industrial sites (rail yards, maritime shipyards and docks, piers and marinas, chemical and petroleum processing plants, aviation facilities)

  • Public monuments

  • Around swimming pools & water features (CEC 680)

  • Landscape


147 outdoor lighting168 l.jpg
§ 147 Outdoor Lighting lighting

New “Layered Method”

  • Outdoor lighting language rewritten for clarity

  • Repackaged for simplification of compliance forms and enforcement

  • No longer break site into many puzzle pieces


147 outdoor lighting169 l.jpg
§ 147 Outdoor Lighting lighting

New “Layered Method”

  • First layer = illuminated hardscape lighting power allowance for entire site

    • May trade off hardscape allowance within the site– provided entire hardscape remains illuminated

    • Must reduce total square feet of site hardscape if luminaires removed


147 outdoor lighting170 l.jpg
§ 147 Outdoor Lighting lighting

New “Layered Method”

  • Other Specific Application “layers” available where appropriate

    • Each additional lighting power allowance is layered on the appropriate portion of site


147 outdoor lighting171 l.jpg
§ 147 Outdoor Lighting lighting

The general hardscape area of a site includes:

  • Parking lots, roadways, driveways, sidewalks, walkways, bikeways, plazas, and other improved areas that are illuminated

  • No longer differentiate between pedestrian and automotive hardscape

  • No longer have methods ‘i’ and ‘ii’


147 outdoor lighting172 l.jpg
§ 147 Outdoor Lighting lighting

TABLE 147-A GENERAL HARDSCAPE LIGHTING POWER ALLOWANCE


Slide173 l.jpg

Grey = hardscape lighting

Blue = building

Green = grass

Red = linear wattage allowance


147 outdoor lighting174 l.jpg
§ 147 Outdoor Lighting lighting

  • Additional Lighting Power Allowance for Specific Applications:

  • Shall be the smaller of:

  • Additional lighting power allowances for specific applications

    • Determined from Table 147-B

    • For appropriate lighting zone

  • Or the actual installed lighting power meeting the requirements for the allowance.




147 outdoor lighting177 l.jpg
§ 147 Outdoor Lighting Applications

Hardscape security exception for local ordinance

  • For hardscape including parking lots, site roadways, driveways, sidewalks, walkways or bikeways

  • When specific light levels are required by law through a local ordinance

    • Provided local ordinance has followed public process allowing formal public notification, review, and comment about the proposed change in accordance with §10-114

  • The smaller of the following additional layer may be added:

    • Actual additional wattage, or

    • LPD specified in TABLE 147-C


147 outdoor lighting178 l.jpg
§ 147 Outdoor Lighting Applications

Hardscape security exception for local ordinance


10 114 outdoor lighting zones l.jpg
§ 10-114 Outdoor Lighting Zones Applications

  • Public process required when adopting ordinances for minimum light levels


Outdoor lighting power l.jpg
Outdoor Lighting Power Applications

Trading off lighting power allowances with

any indoor areas not permitted


Nonresidential sign lighting l.jpg

Nonresidential ApplicationsSignLighting















Slide195 l.jpg

Appliance Efficiency Regulations (Title 20) Applications

Table U-2 Standards for Power Supplies


Slide196 l.jpg

Exceptions to § 148 Applications


101 definitions l.jpg
§ 101 Definitions Applications

Many new definitions added

Clarifications made to existing definitions

Many T24 inquires are answered by taking folks to the definition section


Slide198 l.jpg

Non Res Plan Reviewers Applications

WATTAGE


Luminaire efficacy and wattage is not based on the initial lamp installed l.jpg

Luminaire Efficacy and Wattage is ApplicationsNOT based on the initial lamp installed

  • Luminaire input wattage is based upon the type and rating of the luminaire (Socket-not the light bulb), not the type of lamp initially installed in a luminaire

  • A high efficacy lamp screwed into a low efficacy luminaire is still be considered to be a low efficacy lighting system for Title 24 projects












What is a gu 24 l.jpg

What is a GU-24 ? Applications


What is gu 24 l.jpg

What is GU-24 ? Applications


What is gu 24212 l.jpg

What is GU-24 ? Applications





Slide216 l.jpg

GU-24 Requirements Applications


Slide217 l.jpg

GU-24 Requirements Applications


Slide218 l.jpg

This is a GU 24 Applications


Slide220 l.jpg

An LED source system with a standardized base is an LED lamp.

For purposes of Title 24, an LED bulb which is a drop-in replacement for an incandescent bulb is not an LED light engine with integral heat sink

Residential Compliance Manual Chapter 6.2.10



Thank you l.jpg
Thank lamp.You


ad