1 / 51

Cardiovascular Principles

Cardiovascular Principles. Transducers. Definition. Ultrasound transducers are designed to convert electrical energy into mechanical energy and to convert ultrasound energy into electrical signals. Piezoelectricity. The piezoelectric effect is the formation of an electrical charge

lapis
Download Presentation

Cardiovascular Principles

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cardiovascular Principles Transducers

  2. Definition Ultrasound transducers are designed to convert electrical energy into mechanical energy and to convert ultrasound energy into electrical signals.

  3. Piezoelectricity The piezoelectric effect is the formation of an electrical charge on the surfaces of the crystal when pressure is applied.

  4. Piezoelectricity Converse Piezoelectric Effect The converse piezoelectric effect is the change in the shape of the crystal when an electrical current is applied to the crystal.

  5. Polarization Crystals made of Dipoles Dipoles are oblong asymmetric molecules that appear to have a positive charge at one end ant a negative charge at the other end. In non-polarized crystals these dipoles are disposed randomly.

  6. Dipoles - + - + + - + - - + - + + + - + - -

  7. Polarization • Process of geometrically aligning the dipoles of • of a crystal in order to give it piezoelectric • properties. • Steps • Formation and shaping of the crystal • Heat the crystal at very high temperature • Apply an electrostatic field • Lower the temperature with the electrostatic field applied

  8. Dipoles + + + - - - + + + - - - + + + - - -

  9. Curie Temperature The temperature at which polarization in a crystal is lost.

  10. Resonance Frequency The frequency to which the ultrasound transducer is designed to be maximally sensitive both in its sending and receiving modes of operation

  11. Resonance Frequency The thickness of the crystal determines the Resonance frequency. Ideal crystal thickness = ½ wavelength

  12. Transducer • Piezoelectric crystal • Damping Block • Insulation ring • Tuning coil • Electric Shield • Electric Connectors • Housing

  13. Transducer Electric Connector Housing Electric Shield Insulation Ring Electric Connector Matching Layer Damping Block Piezoelectric Crystal Tuning Coil

  14. Unfocussed Transducer Transition Point 2NFL X Far Field 2X ½ X Near Field NFL

  15. Unfocussed Transducer Near field = Near Zone = Fresnel Zone Far Field = Far Zone = Fraunhofer Zone NFL = ( trx. Diameter) 2 4 x wavelength

  16. Unfocussed Transducer NFL = ( trx. Diameter) 2 4 x wavelength Increasing the frequency decreases the wavelength Increases the NFL

  17. Transducer Central Beam Axis Side Lobes

  18. Focused Transducer Focal Distance Focal Zone

  19. Focusing • Mechanical • Internal • b. External

  20. Focusing • DEFINITION: Narrowing of the beam • Mechanical • Internal • External • Electronic

  21. Mechanically Focused Transducer Crystal Focusing Lens Focal Zone

  22. Electronically Focused Transducer Electronic Delay

  23. Spatial Resolution The ability of the transducer and the ultrasound system to resolve reflectors

  24. Spatial Resolution • Axial • Lateral • Elevational

  25. Spatial Resolution Axial Resolution = SPL / 2 Lateral Resolution = Beam width Elevational Resolution = Slice Thickness

  26. Spatial Resolution Lateral Axial Elevational

  27. Spatial Resolution

  28. Spatial Resolution Elevational Resolution Lateral Resolution

  29. Frequency BandwidthSpectrum Analyzer Peak Amplitude Relative Amplitude -6 dB amplitude 2.5 5.0 7.5 Frequency mHz Frequency Bandwidth

  30. Frequency Bandwidth • The range of frequencies contained in a pulsed wave • Factors • Imperfections in the crystal • Non parallel faces • Coupling of waves • Length of the excitation voltage

  31. Transducer Bandwidth and Spatial Pulse Length

  32. Transducer Frequency and Beam Shape Soft tissue attenuation modifies the frequency spectrum since higher frequencies in the pulse are attenuated to a greater degree than are the lower frequencies.

  33. Beam Softening % 100 5.0 mHz Beam Remaining 7.5 mHz 10 mHz 0 2 4 6 Tissue Depth

  34. Beam Softening The gradual loss of the higher frequency components of the sound beam is referred to as BEAM SOFTENING

  35. Beam Softening Skin Surface Relative Amplitude 6 cm Depth 0 10 mHz

  36. Beam Softening • As the sound wave travels in the tissue there • There is loss of amplitude • Beam softening • Narrower frequency bandwidth • Shift of the bandwidth to the left

  37. Transducer Quality factor • Depends on • The purity of the ultrasound generated • The length of time that the ultrasound persists. • Q- factor = resonance frequency • frequency bandwidth

  38. Q- Factor A. High Q B. Low Q Time

  39. Q- Factor A. High Q Time Narrow Frequency Bandwidth

  40. Q- Factor B. Low Q Time Wide Frequency Bandwidth

  41. Frequency Bandwidth Relative Amplitude Curve Y Curve X 0.5 Curve X Curve Y 2.5 4.0 5.0 6.0 7.5

  42. Matching Layer • Acoustic Impedance Mismatch • Reduce the magnitude of the mismatch • Add a Matching layer

  43. Matching Layer Electric Connector Housing Electric Shield Insulation Ring Electric Connector No Matching Layer Damping Block Piezoelectric Crystal Tuning Coil

  44. Matching Layer Housing Electric Shield Electric Connector Insulation Ring Electric Connector Single Matching Layer Damping Block Piezoelectric Crystal Tuning Coil

  45. Matching Layer Thickness = ¼ wavelength Impedance = Square root of [Z(C) x Z(L)] Z(C) = Acoustic Impedance of the Crystal Z(L) = Acoustic Impedance of the Layer

  46. Matching Layer Without Matching Layer Relative Amplitude With Single Matching Layer Frequency

  47. Multiple Matching Layer • Computer models used to predict • optimum matching layer impedance • values. • This result in a stepwise transition of • impedances from crystal to tissue. • This leads to a further reduction of • acoustic mismatch and therefore a • decreased in Internal reflection. • The result is increased transmission • over a broader frequency band.

  48. Matching Layer Single Matching layer – works well only for the center or resonance frequency. All other frequencies will be reflected to a greater or lesser extent. This results in a narrow frequency bandwidth.

  49. Matching Layer • Broad-Banded Pulse Mean • Shorter SPL – Better axial resolution • Allows more latitude for electric tuning

  50. Matching Layer Housing Electric Shield Electric Connector Insulation Ring Electric Connector Multiple Matching Layer Damping Block Piezoelectric Crystal Tuning Coil

More Related