1 / 23

Pulse-Shaping and Modulation Techniques for Ultra-wide band (UWB) Communications

Pulse-Shaping and Modulation Techniques for Ultra-wide band (UWB) Communications . Simon Bikulcius Ruben Aguila Hien La. Agenda. Introduction to UWB Pulse Shaping concept. Gaussian Pulse Shaping Type of Gaussian shape Matched Filter. UWB Modulation Techniques. Spread spectrum

landon
Download Presentation

Pulse-Shaping and Modulation Techniques for Ultra-wide band (UWB) Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pulse-Shaping and Modulation Techniques for Ultra-wide band (UWB) Communications Simon Bikulcius Ruben Aguila Hien La UWB EE252 spring/2003

  2. Agenda • Introduction to UWB • Pulse Shaping concept Gaussian Pulse Shaping Type of Gaussian shape Matched Filter • UWB Modulation Techniques • Spread spectrum • Mono pulse modulation • Maximum access capacity • UWB Applications • Transceiver comparison • Typical applications for TM-UWB • Summary UWB EE252 spring/2003

  3. What is UWB ? Short pulse with large bandwidth Relative bandwidth Typical bandwidth allocation (narrow band) UWB Bandwidth usage ! For usefulness, must operate over already allocated Spectrum UWB EE252 spring/2003

  4. Concept Data in LNA Modulate MF Detector Data out Pulse shaping filter Matched Filter Pulse Generator Pulse Generation Simplified System; looking at pulse only Excluding Multi-path Reference : Ultra-Wideband Impulse Radar – An Overview of the Principles, Malek G.M. Hussian, IEEE Result of HP of Antennas Received (Equivalent to Gaussian shape) Transmit (example) UWB EE252 spring/2003

  5. Concept From a mathematical point of view, the treatment of a pulse can be deduced to a Gaussian Shape for understanding. However, there are other possible pulses which depend on filtering methods triplet c) b) A) hex-let doublet The idea : To have more bandwidth, N is minimized or increases Index of Breadth of band Reference: UWB EE252 spring/2003

  6. Concept Time Model of Gaussian Pulse N=16 Bipolar case , 2 time instants Reference: Principles of High-Resolution Radar Based on Nonsinusoidal Waves-Part 1: Singal Representation and Pulse Compression, Malek G. M. Hussian, IEEE UWB EE252 spring/2003

  7. Concept Pulse through an Ideal matched filter autocorrelation and PSD In the frequency domain Has the function of a Sinc Autocorrelation of binary transmission Sum of two arbitrary Autocorrelations N= length of binary sequence D = duty ratio m,n=pair of integer Reference: Principles of High-Resolution Radar Based on Nonsinusoidal Waves-Part 1: Singal Representation and Pulse Compression, Malek G. M. Hussian, IEEE UWB EE252 spring/2003

  8. Concept Filtering At the receiver Because the and a raised cosine can be used on the receiving end (Other possibility is a Correlator) Guard band factor commonly 0.35 Exchange for the Correction notation References: Ultawideband (UWB) Impulse Signal Detection And Processing Issues, Elizabeth C. Kisenwether, HRB Systems,Inc Circuits and Systems Faculty of Electrical Engineering Mekelweg 4, http://cas.et.tudelft.nl UWB EE252 spring/2003

  9. Power density (dB) 0 -0.2ns 0.2ns -10 -20 -30 T -40 -50 0 1 2 3 4 5 Fc Frequency (GHz) UWB Modulation Technique • UWB is a Spread Spectrum System • Basic Gaussian Monocycle waveform produces a “spread spectrum” BW • Center Frequency, Fc = 1/(T*3.14) • BW approx. equal to 1/T UWB EE252 spring/2003

  10. UWB Modulation Technique 0 -10 -20 -30 -40 -50 0 1 2 3 4 5 Frequency (GHz) • A UWB system uses a long sequence of pulses for communication. • A regular pulse train produces energy spikes (comb-lines) at regular intervals. • Pulse train carries no information and “comb-lines” interfere with conventional radios. Power density (dB) Pulse train Time Frequency Spectrum • Pulse-modulation scheme: one that communicates information and reduces the amplitude of the “comb-lines” . UWB EE252 spring/2003

  11. UWB Modulation Technique • Pulse Modulation (PAM) • “tall” and “short” mono-pulse waveforms correspond to “1” and “0”. • On-off keying (OOK) • The presence of a pulse is a “1” and the absence of a pulse is “0”. • Direct Sequence Modulation (DSC) • A sequence of binary pulses directly modulate high duty cycle mono-pulses. • Pulse Position modulation (PPM) • A “1” and a “0” is determined by a pico-second delay T1 or T2. • of a mono-pulse. This modulation scheme also makes use of “time-hopping” • The modulation technique of choice for a UWB “impulse radio” is the PPM • with time-hopping. It offers the following advantages: • - multiple access communication (i.e. many users) • - security “time-hopping” code • -low power frequency spectrum that appears like noise • Ref: M.Z. Win, R.A. Scholtz, L.W. Fullerton, “Time-hopping SSMA Techniques for Impulse Radio..” UWB EE252 spring/2003

  12. UWB Modulation Technique Power density (dB) 0 -10 -20 -30 -40 -50 0 1 2 3 4 5 Frequency Spectrum Frequency (GHz) Time T1 T2 • UWB Impulse systems use pulse position modulation (PPM) • The PPM modulates the position of a pulse about a nominal position. • A “1” and a “0” is determined by a pico-second delay T1 or T2 of a mono-pulse. • PPM “smooths-out” the spectrum making the transmitted look almost like noise. UWB EE252 spring/2003

  13. Power density (dB) hopping 0 -10 -20 -30 -40 Time -50 Nominal pulse train New position after hopping 0 1 2 3 4 5 Frequency Spectrum Frequency (GHz) UWB Modulation Technique • Pseudo-Random noise coding (PN-codes) are used for channelization. • Time-hopping, shifting each pulse’s time position, in accordance with a code • channelizes the pulse train. • Only a receiver with the same PN-code template can decode the pulse transmission. • The Pseudo-Random noise coding makes the spectrum appear very-much like noise. UWB EE252 spring/2003

  14. UWB Modulation Technique A typical time hopping format with PPM is, • where, • - W(t) represents a narrow monocycle pulse waveform. • - Tf represents the time between pulses. • - (Cj)Tc represents the distinct pulse-shift pattern (time-hopping code). Tc • is a reference time shift. Each hopping code Cj provides an added time shift. • -d(k) represents the data sequence and is a binary (0 or 1) symbol stream. For “0”, no time-shift occurs. For “1”, a time-shift of delta occurs. A total of Ns mono- cycle-pulses are transmitted per symbol; thus, this is an over-sampled • modulation system. • A single symbol has a duration of Ts = Ns times Tf • The binary symbol rate, Rs, is equal to 1/Ts. Ref: RA Scholtz, “Multiple Access with Time-hopping Impulse Modulation” UWB EE252 spring/2003

  15. UWB Modulation Technique Multi-path signal Reflected pulse Direct pulse Direct pulse Reflected pulse building Receive Window (500 Pico-seconds) • The mono-pulse short duration waveform is immune to multi-path cancellation. • Rayleigh fading due to mult-path is a CW phenomenon. • A UWB Impulse system does not have a CW carrier. • The extra length traveled by a multi-path signal causes it to arrive outside the Receive • time window UWB EE252 spring/2003

  16. UWB Modulation Technique • A high density of simultaneous users can be achieved by using PN-codes for channelization. • In the receiver, a template of the PN-code is correlated with the in-coming received signal. • A UWB utilizing PN-codes (time-hopping) has excellent multiple-access performance. • The un-coded Bit-error probability is dependent on the number of active users and • the binary symbol rate, Rs. Log10(Perror) -2.3 Rs= 20 kbps -2.4 Condition: SNR = 9.8 dB -2.5 -2.6 Rs=10 kbps -2.7 -2.8 Rs= 5 kbps -2.9 -3.0 2000 4000 6000 8000 Number of active users 10000 Ref: RA Scholtz “Multiple access with time-hopping IM” UWB EE252 spring/2003

  17. UWB Modulation Technique • For the UWB system utilizing time-hopping, the Maximum Access Capacity • is dependent on additional power required to maintain the required SNR and BER. • The number of active users increases rapidly as the power increases from 0 to 10 dB, • No significant increase in number of users for any further increase in power. Total number of users 30000 BER = 0.001 20000 BER = 0.0001 BER = 0.00001 10000 Ref: Win, Scholtz, “Impulse Radio: How it works.” 0 0 10 20 30 40 Additional power, dB (compared to power for one user) UWB EE252 spring/2003

  18. UWB versus Traditional Narrow Band Transceiver UWB EE252 spring/2003

  19. TM UWB Transmitter Generated PN time coding And time modulation Pico second precision timer Implemented in an Integrated Circuit is a key technological component of the TM-UWB system. UWB EE252 spring/2003

  20. TM-UWB Receiver Modulation is decoded as either “early” or “late” in Time Modulation or as a Positive or Negative pulse in Polarity Modulation UWB EE252 spring/2003

  21. Typical Applications for Low Duty cycle UWB(TM-UWB) More popular • Full duplex 1.3 GHz Radio System: • * 250 uW output power • * Variable data rate 39kbps-156kbps • * 16Km in range • Simplex 2.0GHz Data Link: • * 50uW output power • * Data rate of 5Mbps- BER<10E-8 without FEC • * Range of 10m thru multiple walls inside an office building • Thru Wall Radar: • * Detect human presence and movement through wall • Radio Frequency Identification (RFID) • * Monitor the status of equipment in warehouses or in hospitals and transmit • sensor data to a central network along with location information. • And many more….. UWB EE252 spring/2003

  22. Direct Sequence Phase Coded UWB (DSC-UWB) • Less Popular • Suitable mostly for Data Communications • Information About FCC’s UWB Regulation • UWB Device is permitted as follows: • Frequency: 3.1 GHz to 10.6 GHz. • Mean Transmit power: <-41 dBm/MHz • equivalent to 500uV at three meters distance. • Peak/Mean power ratio: limited to less • than 20 dB. • Measurement procedures of 47CFR15.35(May 10/2000) UWB EE252 spring/2003

  23. Summary • From an analytical point of view the UWB can be viewed as a reception of Gaussian pulses • The Fourier transform of the autocorrelation shows a distribution of spaced spectra which is representative of the pulse period. Dithering or sequencing is need to reduce The spectra from interfering. • The filtering/matching of the pulse on the receiving end will need the • bandwidth approximately that of the Rise time of the pulse. • UWB Pulse position Modulation with time-hopping offers: • -multiple access communication for 25,000 users. • -channelized security codes • -noise-like wide frequency spectrum • -multi path immunity • -nearly “all-digital” with minimal RF microwave electronic • UWB transceiver can be simpler and resulted at lower cost • Many UWB’s applications have been implemented • FCC’s regulation for UWB has been established UWB EE252 spring/2003

More Related