1 / 16

Equipment : Model 703 Bobcat Skid-Steer Loader with Backhoe. Job :

Contractor Fatality Preliminary Report. Equipment : Model 703 Bobcat Skid-Steer Loader with Backhoe. Job : Excavate a shallow trench around a roof drainage pond ( approximately .3 meter /1 foot; .6 meter/2 feet wide ). Contractor Fatality Preliminary Report.

lakia
Download Presentation

Equipment : Model 703 Bobcat Skid-Steer Loader with Backhoe. Job :

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Contractor Fatality Preliminary Report Equipment: Model 703 Bobcat Skid-Steer Loader with Backhoe. Job: Excavate a shallow trench around a roof drainage pond (approximately .3 meter /1 foot; .6 meter/2 feet wide)

  2. Contractor Fatality Preliminary Report On September 23, 2002, a worker was fatally injured while operating a backhoe attachment on a Bobcat Loader. It appears that during operation, the backhoe attachment rotated backward pinning the upper chest of the operator between a handrail on the backhoe frame and the cab surrounding the normal operating position of the loader.

  3. Illustration: Normal position of Bobcat loader with backhoe • Safety chain around backhoe and tool bar • Independent seat and controls in front of cab compartment

  4. Warning label of the hazard on the equipment

  5. After incident: Backhoe frame rotated backward into cab

  6. Degree of Rotation: Stabilizers normally perpendicular to the ground

  7. Upper points of Backhoe attachment engaged • Lower points of Backhoe attachment not engaged

  8. Levers on the tool bar to engage and disengage backhoe locking pins (2) found in a disengaged position after incident

  9. One of the two locking pins in an engaged position. Note: They were not found in this position after the incident.

  10. Linch pin to secure the safety chain in a locking mechanism was not being utilized One of the two slots in the Backhoe frame for the locking pins to protrude through and secure the Backhoe to the Tool Bar

  11. Safety chain secured around the backhoe frame – instead of both the backhoe and Tool Bar. The Safety chain was not broken.

  12. Operator caught between backhoe handrail and cab enclosure

  13. Close-Up of the Pinch point

  14. Preliminary Observations • The levers for locking pins appeared operational and the locking pins did not appear to be damaged. • The safety chain was not broken. It was found to be secured only around the backhoe instead of both the backhoe and tool bar.

  15. Unresolved at this Point… • Contractors mobile equipment program details • Formal Training of the Operator on the Bobcat Backhoe • Experience level of Operator on Bobcat Loaders • Circumstances around the Backhoe assembly • Reasons for Operator failing to secure the Backhoe with the locking pins and safety chain • Whether a pre-use inspection was conducted by the Operator

  16. Actions for All Locations • Emphasize pre-use inspections to confirm proper installation and condition of equipment • Re-emphasize in training the need to properly engage and secure attachments and safety devices • Abide by manufacturer’s warning labels and Instructions for safe operation of equipment

More Related