1 / 77

Transportation Engineering II

Transportation Engineering II. The Pavement. What is a Pavement?. A multi layer system that distributes the vehicular loads over a larger area. What is a Pavement?. OR

lainez
Download Presentation

Transportation Engineering II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Transportation Engineering II The Pavement

  2. What is a Pavement? • A multi layer system that distributes the vehicular loads over a larger area

  3. What is a Pavement? OR • Highway pavement is a structure consisting of superimposed layers of selected and processed materials whose primary function is to distribute the applied vehicle loadto the sub grade. OR • It can also be defined as“structure which separates the tires of vehicles from the under lying foundation.”

  4. What is a Pavement? • Pavement is the upper part of roadway, airport or parking area structure • It includes all layers resting on the original ground • – It consists of all structural elements or layers, including shoulders

  5. Functions of the Pavement • Reduce and distribute the traffic loading so as not to damage the subgrade • – Provide vehicle access between two points under all-weather conditions • – Provide safe, smooth and comfortable ride to road users without undue delays and excessive wear & tear • – Meet environmental and aesthetics requirement • – Limited noise and air pollution • – Reasonable economy

  6. Requirements of pavement structure • Sufficient thickness to spread loading to a pressure intensity tolerable by subgade • Sufficiently strong to carry imposed stress due to traffic load • Sufficient thickness to prevent the effect of frost susceptible subgade • Pavement material should be impervious to penetration of surface water which could weaken subgade and subsequently pavement • Pavement mat. shd be non-frost susceptible • Pavement surface shd. be skid resistant

  7. Classification of Pavements

  8. PAVEMENTS Types of Pavement Flexible Pavements Rigid Pavements

  9. Asphalt Concrete Aggregate Base Course Natural Soil (Subgrade) Aggregate Subbase Course Flexible Pavements

  10. Given Wheel Load Flexible Pavements 150 psi Wearing C. Base Sub-base 3 psi Sub-grade Load Distribution in Flexible Pavements

  11. Rigid Pavements

  12. Rigid Pavements Load Distribution in Rigid Pavements

  13. Pavements Comparison • Flexible pavements: • Deep foundations / multi layer construction • Energy consumption due to transportation of materials • Increasing cost of asphalt due to high oil prices • Rigid pavements • Single layer • Generally last longer • May require asphalt topping due to noise / comfort • issues

  14. Pavements Comparison • Heavy vehicles consume less fuel on rigid pavements • Rigid pavements more economic when considering environmental / life-cycle costing

  15. Flexible Pavement • “A flexible pavement is a structure that maintains intimate contact with and distributes load to the sub grade and depends on aggregate interlock, particle friction and cohesion for stability”

  16. FlexiblePavement OR • It is a structure which distributes the traffic loading stresses to the soil (sub grade) at a magnitude that will not shear or distort the soil i.e., from 150 psi to 3 psi OR • Pavement which reflects deformation of sub grade & the subsequent layers on to the surface” i.e.; load is transmitted from grain to grain through contact points of granular material, i.e. in a compressive way.

  17. Flexible Pavement Flexible pavements • Elastic • Three main layers • Surfacing • Wearing course • Base course • Road base • Sub base • Supported by Sub-grade

  18. Flexible Pavement Introduction • Flexible pavements are so named because the total pavement structure deflects, or flexes, under loading.  A flexible pavement structure is typically composed of several layers of different materials. 

  19. Flexible Pavement • Each layer receives the loads from the above layer, spreads them out, then passes on these loads to the next layer below.  Thus, the further down in the pavement structure a particular layer is, the less load (in terms of force per unit area) it must carry.

  20. Load Distribution In Flexible Pavements

  21. Structure of Flexible Pavement • In order to take maximum advantage of this property, material layers are usually arranged in order of descending load bearing capacity with the highest load bearing capacity material (and most expensive) on the top and the lowest load bearing capacity material (and least expensive) at the bottom.

  22. Structure of Flexible Pavement • Surface Course: This is the top layer and the layer that comes in contact with traffic.  • Base Course: This is the layer directly below the surface course and generally consists of aggregates (either stabilized or un-stabilized). • Sub-base Course: This is the layer (or layers) under the base layer.  A sub-base is not always needed.

  23. Structure of Flexible Pavement • Sub-grade Course: The "sub-grade" is the material upon which the pavement structure is placed. Although there is a tendency to look at pavement performance in terms of pavement structure and mix design alone. The sub-grade can often be the overriding factor in pavement performance.

  24. Surface Course • The surface course is the layer in contact with traffic loads and normally contains the highest quality materials.  It provides characteristics such as friction, smoothness, noise control, rut and shoving resistance and drainage.

  25. Surface Course •   In addition, it serves to prevent the entrance of excessive quantities of surface water into the underlying base, sub-base and sub-grade. This top structural layer of material is sometimes subdivided into two layers.

  26. Wearing Course • This is the layer in direct contact with traffic loads.  It is meant to take the brunt of traffic wear and can be removed and replaced as it becomes worn.  A properly designed (and funded) preservation program should be able to identify pavement surface distress while it is still confined to the wearing course.  This way, the wearing course can be rehabilitated before distress propagates into the underlying intermediate/blinder course

  27. Intermediate/Binder Course • Intermediate/Binder Course: This layer provides the bulk of the HMA structure.  It's main purpose is to distribute load.

  28. Base Course • The base course is immediately beneath the surface course.  It provides additional load distribution and contributes to drainage and frost resistance.  Base courses are usually constructed out of: • Aggregates: Base courses are most typically constructed from durable aggregates that will not be damaged by moisture or frost action.  Aggregates can be either stabilized or un-stabilized. 

  29. HMA: In certain situations where high base stiffness is desired, base courses can be constructed using a variety of HMA mixes.  In relation to surface course HMA mixes, base course mixes usually contain larger maximum aggregate sizes, are more open graded and are subject to more lenient specifications.

  30. Lime rock Base Course Undergoing Final Grading

  31. Sub-base Course • The sub-base course is between the base course and the sub-grade.  It functions primarily as structural support but it can also: • Minimize the intrusion of fines from the sub-grade into the pavement structure. • Improves drainage. • Minimize frost action damage. • Provides a working platform for construction.

  32. Sub-base Course • The sub-base generally consists of lower quality materials than the base course but better than the sub-grade soils.  • A sub-base course is not always needed or used.  • For example, a pavement constructed over a high quality, stiff sub-grade may not need the additional features offered by a sub-base course so it may be omitted from design. 

  33. However, a pavement constructed over a low quality soil such as a swelling clay may require the additional load distribution characteristic that a sub-base course can offer.  In this scenario the sub-base course may consist of high quality fill used to replace poor quality sub-grade.

  34. Sub-grade • Although a pavement's wearing course is most prominent, the success or failure of a pavement is more often than not dependent upon the underlying sub-grade , the material upon which the pavement structure is built. 

  35. Sub-grade • Sub-grades be composed of a wide range of materials although some are much better than others.  This subsection discusses a few of the aspects of sub-grade materials that make them either desirable or undesirable and the typical tests used to characterize sub-grades.

  36. Sub-grade Preparation Sub-grade Failure Crack

  37. Types of Flexible Pavement Dense-graded Open-graded Gap-graded

  38. Flexible Pavement – Construction

  39. Types of Pavements

  40. Types of Pavements

  41. Types of Pavements

  42. Types of Pavements

  43. Types of Pavements

  44. Types of Pavements

  45. Types of Flexible Pavements

  46. Types of Flexible Pavements

  47. Types of Flexible Pavements

  48. Bituminous Layer Sub-grade Typical Load Distribution in Flexible Pavement Wheel Load

  49. Vertical stress Typical Stress Distribution in Flexible Pavement. Foundation stress

  50. Load Transfer Mechanism

More Related