1 / 7

Water

SOIL - WATER RELATIONSHIPS. Ground Surface (G.S.). Air. Water. Water Table (W.T.). Voids. Solids. By: KAMAL TAWFIQ, Ph.D.; P.E. 1. STRESSES CAUSED BY A POINT LOAD. Boussinesq’s Equation. D P z = (3P/2 p) (Z 3 /L 5 ). P. Using Influence Factor. Y. GROUND SURFACE.

kyrene
Download Presentation

Water

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SOIL - WATER RELATIONSHIPS Ground Surface (G.S.) Air Water Water Table (W.T.) Voids Solids By: KAMAL TAWFIQ, Ph.D.; P.E.

  2. 1. STRESSES CAUSED BY A POINT LOAD Boussinesq’s Equation DPz = (3P/2p) (Z3/L5) P Using Influence Factor Y GROUND SURFACE DP = (P/Z2) Ip X L Z General Stresses DP = s1 DP = sv Principal Stresses t s2 sh s3 Z By Kamal Tawfiq, Ph.D; P.E.

  3. 2. STRESSES CAUSED BY A LINE LOAD QO (Load/Unit Length) QO (Load/Unit Length) X Y WALL X Z Boussinesq’s Equation DPz = {2 Qo Z3/p (X2 + Z2 )2} Z General Stresses Using Influence Factor DP = sv s1 DP = (P/Z) IL Principal Stresses t s2 sh s3 Z By Kamal Tawfiq, Ph.D; P.E.

  4. 4. TRIANGULAR LOAD 3. CONTINUOUS LOAD DP = (q/p) {(X/B) a - (sin 2d/2)} DP = q/p [b + sin b cos (b + 2 d)] Y X Z General Stresses HIGHWAY EMBANKMENT sv s1 Principal Stresses t s2 sh s3 Z By Kamal Tawfiq, Ph.D; P.E.

  5. 5. VERTICAL STRESS DUE TO CIRCULAR LOAD Qo X q Y GROUND SURFACE X Z DP= q { 1- 1/[(R/Z)2 + 1 ]3/2 } Z General Stresses DP = sv s1 Principal Stresses t s2 sh s3 Z By Kamal Tawfiq, Ph.D; P.E.

  6. 6. VERTICAL STRESS DUE TO RECTANGULAR LOAD DP = q IR IR = 1/4p {[ (2. m.n (m2 + n2 + 1)1/2 ) / (m2 + n2 + m2. n2 + 1) ] [(m2 + n2 + 2)/(m2 + n2 + 1)] + tan-1 (2.m .n (m2 + n2 + 1)1/2 / (m2 + n2 - m2 . n2 + 1)} IR = f (m,n) L q = Load /Area B Loaded Area Foundation Level Corner of the Building L X Z B m = B/Z DP = sv m & n from Charts t n = L/Z sh By Kamal Tawfiq, Ph.D; P.E.

  7. GROUND SURFACE Water Table Dpv + sv Stresses due to additional load H Geostatic Stress sh + Δph A

More Related