1 / 36

Electricity and Magnetism

Electricity and Magnetism. Electric Field. F = q E. Or E = F / q. where q is a test charge. Electric Field of a Charge. Since F= kQq / r 2 We have E=F/ q = kQ/r 2. Gravitational. +. A.

krysta
Download Presentation

Electricity and Magnetism

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electricity and Magnetism

  2. Electric Field F=qE Or E=F/q where q is a test charge

  3. Electric Field of a Charge Since F=kQq/r2 We have E=F/q=kQ/r2

  4. Gravitational + A m F=mg Q b F=QE - B Earth + A PE=mgh (KE=0) F=mg W=PE W=QEd(Charge) W=mgh(mass) PE=QEd (KE=0) F=QE h c d PE=0 PE=0 - B Earth + A d PE=0 KE=mgh PE=0 KE=QEd - B Earth Electric + A g a E - B Earth

  5. Potential difference is the work done to move the charge from one point to another. Only potential difference between two pointsis physically meaningful DV=Vab=Vb-Va=Wab/Q Equipotential lines a E d b Vab=Ed(uniform electric field)

  6. V V r r + Electric Potential due to a Point Charge V=kQ/r(V=0 at r=∞) r r Electric Potential due to Uniform Electric Field Vab=Ed

  7. Electric force:F=kQAQB/r2, • Electric Field: E=F/Q • Electric potential:V=PE/q • Potential difference: • Vab=Vb-Va=DPE/q=Wba/q or Wba=qVab • (a) For uniform electric field:Vab=Ed • (b) For electric field due to a point charge: • V=kQ/r, (V=0 at r=∞)

  8. (e) X

  9. Q -Q + + + + + + + + - - - - - - - - d - + Capacitance C=Q/V Unit:farad, F. 1 F=1 coulomb/volt

  10. Dielectric Constant, Ka measure of how effective it is in reducing an electric field across the plates Q -Q Vo Co=Q/Vo Q -Q + + V=Vo/K C=Q/V=KQ/Vo=KCo + +

  11. + + + + + + + + - - - - - - - - d • Example:Imagine moving a proton from the negative plate to the positive plate. • The plates are 1.5 cm apart. The electric field is uniform with a magnitude of 1500 N/C. • What is the change in the proton’s electric potential energy? • What is the electric potential difference between the plates (voltage)? • If the proton is released from rest at the positive plate, what speed will it have • just before it hits the negative plate? • Solution: Given E=1500 N/C, q=+1.6x10-19 C, m=1.67X10-27 kg, d=1.5 cm=1.5X10-2 m • (a) DU=qEd=(1.6x10-19 C)(1500 N/C)(1.50x10-2 m)=3.60x10-18 J • (b) DV=DU/q=3.6x10-18 J/1.6x10-19 C=22.5 V • (c) DKE+DU=0 or DKE=-DU=mv2/2 • v=(2DU/m)1/2=6.57x104 m/s

  12. Ohm’s Law(German Physicist, Georg Ohm, 1787-1854) I=V/R Definition of Resistance R=V/I Theunit for R is Ohm, W 1W=1V/1A

  13. R=rL/A • ris the resistivity, and depends on the material used • r reflects intrinsic properties of the material • r is a function of temperature • The unit of r is Wm

  14. The work that must be done to take Q through V W=QV Since I=Q/t or Q=It, W=IVt(Electric work) Recall Power P=work done/time interval=W/t, P=IV (Electric Power) Using Ohm’s law I=V/R, P=I2R=V2/R The unit for Power is Watt, 1W=1J/s

  15. Ohm’s law V=IR Resistivity r=R•A/L (R=rL/A) Power P=IV=I2R=V2/R

  16. I R1 I R V Resistors in Series I I R2 R3 V=V1+V2+V3 I=I1=I2=I3 (Resistors in series have the same current) V=IR=IR1+IR2+IR3=I(R1+R2+R3) R=R1+R2+R3

  17. R3 I R2 I R1 I R V Resistors in Parallel I3 I2 I1 I=I1+I2+I3 V=V1=V2=V3 (Resistors in parallel have the same voltage) I=V/R=V/R1+V/R2+V/R3=V/(R1+R2+R3) 1/R=1/R1+1/R2+1/R3

  18. R3 I R2 I R1 IncreasingA1/R=1/R1+1/R2+1/R3+… R=rL/A > > R2 R3 R1 IncreasingL R=R1+R2+R3+…

  19. R’ =R’=R2R3/ (R2+R3); R2 = 1/R’=1/R2+1/R3=(R2+R3)/R2R3 R3 R’’ R’’=R1+R’ = R’ R1 R =R=R”R4/ (R”+R4) R” = R4 I2 I1 R1 R2 R’ R3 I3 I R” I > > R4 I4

  20. Capacitors in Combination Capacitors in Series -Q +Q -Q +Q -Q +Q C1 C2 C3 Q=CV or V=Q/C V=V1+V2+V3 >>> Q/C=Q/C1+Q/C2+Q/C3 1/C=1/C1+1/C2+1/C3 (Q=Q1=Q2=Q3) Resistors in series R=R1+R2+R3 (I=I1=I2=I3)

  21. Capacitors in Parallel -Q1 +Q1 C1 -Q2 +Q2 C2 C=εA/d -Q3 +Q3 C3 Q1=C1V, Q2=C2V, Q3=C3V Q=Q1+Q2+Q3 CV=C1V+C2V+C3V C=C1+C2+C3 Resistors in parallel 1/R=1/R1+1/R2+1/R3 (V=V1=V2=V3)

  22. x (a) 6.8 W

  23. Magnetic Force Magnetic forces arise from the interactions of moving charges in magnetic fields. (The electrical force is between two charges at rest)

  24. A Moving Charge in Magnetic Field Magnetic field, B, is defined in terms of the magnetic force F on a moving charge: Magnetic field magnitude: B=F/QvsinQ orF=BQvsinQ (electric force: F=EQ) Fmax=BQvif Q=90o or sinQ=1 Direction of B: Right-hand rule F v Q Q B Unit: 1 tesla=1 T=1 N/A·m (1T=104 gauss (G))

  25. An Electric Current in a Magnetic Field A magnet exerts a magnetic force on a current-carrying wire: B=F/IlsinQ or F=IlBsinQ (for moving charge F=qvBsinQ) Direction: Right-hand rule F=0 when Q=0o Fmax=IlB when Q=90o I B Q

  26. F=BQvsinQ for a moving charge F=BIlsinQ for a current

  27. Which one of the following statements concerning the magnetic force on a charged particle in a magnetic field is true? (a) It is a maximum if the particle is stationary. (b) It is zero if the particle moves perpendicular to the field. (c) It is a maximum if the particle moves parallel to the field. (d) It acts in the direction of motion for a positively charged particle. (e) It depends on the component of the particle's velocity that is perpendicular to the field. X

  28. Example: Alpha particles of charge q=+2e and mass m=6.6x10-27 kg and emitted from a radioactive source at a speed of 1.6x107 m/s. What magnetic field strength would be required to bend these into a circular path of radius r=0.25 m? Solution: To have a circular path, the magnetic field has to be perpendicular to the velocity, i.e. Q=90o or sinQ=1. The magnetic force provides the centripetal acceleration: qvB=mv2/r (rotational motion a=w2r=v2/r) thus B= mv2/rqv =(6.6x10-27 kg)(1.6x107 m/s)2 /(0.25m)(2x1.6x10-19 C)(1.6x107 m/s) =1.3 T v r ×× ×× B F

  29. 2r ••••• ••••• FE=qE, FM=qvB Stage 1: qE=qvB thus v=E/B Stage 2: qvB’=mv2/r so m=qB’r/v=qBB’r/v

  30. Example: If E=40,000 V/m, B=B’=0.08T and r=39.0 cm, what is the mass of the ions? Solution:E=vB (stage 1) or v=4.0x104 V/m/8.0x10-2 T=5.0x105 m/s qvB’=mv2/r (stage 2) so m=qB’r/v=(1.6x10-19 C)(8.0x10-2 T)(0.39m)/5.0x105 m/s =9.98x10-27 kg

  31. B=moI/2r > B > < > < r I Magnetic field at the center of a current loop B=moI/2pr I × r B

  32. Faraday’s Law EMF= - DFB/Dt

  33. EMF Induced in Moving Conductor Motional EMF=DFB/Dt=BDA/Dt=BlvDt/Dt=Blv ×××××××××××××××××××× ×××××××××××××××××××× ×××××××××××××××××××× ×××××××××××××××××××× ×××××××××××××××××××× ×××××××××××××××××××× I

  34. I2 I1 R1 R2 R’ R1=3W, R2=12 W, R3=8W, R4=6 W, R’=4.8W, R”=7.8 W R3 I3 I I” R” I > > R4 I4 A potential difference V=12 V is applied across the set of resistors shown. Find the current that flows through each resistor. Solution:V=Vupper=Vlower=12 V I4=V/R4=12V/6W=2 A I1=I”=V/R’’=12V/7.8W=1.54 A V’=I1R’=(1.54A)(4.8W)=7.4 V or V1=I1R1=(1.54V)(3W)=4.6V, V’=V-V1=12V-4.6V=7.4V I2=V’/R2=7.4V/12W=0.62 A I3=V’/R3=7.4V/8W=0.92 A

  35. At which of the labeled points will the electric field have the greatest magnitude? (a) G (c) A (e) D (b) I (d) H x At which of the labeled points will an electron have the greatest potential energy? (a) A (c) G (e) I (b) D (d) H x What is the potential difference between points B and E? (a) 10 V (c) 40 V (e) 60 V (b) 30 V (d) 50 V x

More Related