1 / 26

Dynamic Lines

Dynamic Lines. Dynamic analysis. Health of people and activity of medical establishments change in time. Studying of dynamics of the phenomena is very important for the analysis of a state of health and activity of system of public health services. Example of a dynamic line.

kpride
Download Presentation

Dynamic Lines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dynamic Lines

  2. Dynamic analysis • Health of people and activity of medical establishments change in time. • Studying of dynamics of the phenomena is very important for the analysis of a state of health and activity of system of public health services.

  3. Example of a dynamic line

  4. Parameters applied for analysis of changes of a phenomenon • Rate of growth –relation of all numbers of dynamic lines to the previous level accepted for 100 %.

  5. Parameters applied for analysis of changes of a phenomenon • Pure gain – difference between next and previous numbers of dynamic lines.

  6. Parameters applied for analysis of changes of a phenomenon • Rate of gain – relation of the pure gain to previous number.

  7. Parameters applied for analysis of changes of a phenomenon • Parameter of visualization — relation of all numbers of dynamic lines to the first level, which one starts to 100%.

  8. Measures of Association

  9. Measures of Association • Absolute risk • The relative risk and odds ratio provide a measure of risk compared with a standard. • Attributable risk or Risk difference is a measure of absolute risk. It represents the excess risk of disease in those exposed taking into account the background rate of disease. The attributable risk is defined as the difference between the incidence rates in the exposed and non-exposed groups. • Population Attributable Risk is used to describe the excess rate of disease in the total study population of exposed and non-exposed individuals that is attributable to the exposure. • Number needed to treat (NNT) • The number of patients who would need to be treated to prevent one adverse outcome is often used to present the results of randomized trials.

  10. Relative Values As a result of statistical research during processing of the statistical data of disease, mortality rate, lethality, etc. absolute numbers are received, which specify the number of the phenomena. Though absolute numbers have a certain cognitive values, but their use is limited.

  11. Relative Values In order to acquire a level of the phenomenon, for comparison of a parameter in dynamics or with a parameter of other territory it is necessary to calculate relative values (parameters, factors) which represent result of a ratio of statistical numbers between itself. The basic arithmetic action at subtraction of relative values is division.

  12. In medical statistics themselves the following kinds of relative parameters are used: • Extensive; • Intensive; • Relative intensity; • Visualization; • Correlation.

  13. The extensive parameter, or a parameter of distribution, characterizes a parts of the phenomena (structure), that is it shows, what part from the general number of all diseases (died) is made with this or that disease which enters into total.

  14. Using this parameter, it is possible to determine the structure of patients according to age, social status, etc. It is accepted to express this parameter in percentage, but it can be calculated and in parts per thousand case when the part of the given disease is small and at the calculation in percentage it is expressed as decimal fraction, instead of an integer.

  15. The general formula of its calculation is the following: part × 100 total

  16. The intensive parameter characterizes frequency or distribution. • It shows how frequently the given phenomenon occurs in the given environment. • For example, how frequently there is this or that disease among the population or how frequently people are dying from this or that disease. • To calculate the intensive parameter, it is necessary to know the population or the contingent.

  17. General formula of the calculation is the following: phenomenon×100 (1000; 10 000; 100 000) environment

  18. General mortality rate number of died during the year × 1000 number of the population

  19. Parameters of relative intensity represent a numerical ratio of two or several structures of the same elements of a set, which is studied. • They allow determining a degree of conformity (advantage or reduction) of similar attributes and are used as auxiliary reception; in those cases where it isn’t possible to receive direct intensive parameters or if it is necessary to measure a degree of a disproportion in structure of two or several close processes.

  20. The parameter of correlation characterizes the relation between diverse values. • For example, the parameter of average bed occupancy, nurses, etc. • The techniques of subtraction of the correlation parameter is the same as for intensive parameter, nevertheless the number of an intensive parameter stands in the numerator, is included into denominator, where as in a parameter of visualization of numerator and denominator different.

  21. The parameter of visualization characterizes the relation of any of comparable values to the initial level accepted for 100. This parameter is used for convenience of comparison, and also in case shows a direction of process (increase, reduction) not showing a level or the numbers of the phenomenon. • It can be used for the characteristic of dynamics of the phenomena, for comparison on separate territories, in different groups of the population, for the construction of graphic.

  22. SIMULATION Consider a box containing chips or cards, each of which is numbered either 0 or 1. We want to take a sample from this box in order to estimate the percentage of the cards that are numbered with a 1. The population in this case is the box of cards, which we will call the population box. The percentage of cards in the box that are numbered with a 1 is the parameter π.

  23. SIMULATION In the Harris study the parameter π is unknown. Here, however, in order to see how samples behave, we will make our model with a known percentage of cards numbered with a 1, say π = 60%. At the same time we will estimate π, pretending that we don’t know its value, by examining 25 cards in the box.

  24. SIMULATION We take a simple random sample with replacement of 25 cards from the box as follows. Mix the box of cards; choose one at random; record it; replace it; and then repeat the procedure until we have recorded the numbers on 25 cards. Although survey samples are not generally drawn with replacement, our simulation simplifies the analysis because the box remains unchanged between draws; so, after examining each card, the chance of drawing a card numbered 1 on the following draw is the same as it was for the previous draw, in this case a 60% chance.

  25. SIMULATION Let’s say that after drawing the 25 cards this way, we obtain the following results, recorded in 5 rows of 5 numbers:

  26. SIMULATION Based on this sample of 25 draws, we want to guess the percentage of 1’s in the box. There are 14 cards numbered 1 in the sample. This gives us a sample percentage of p=14/25=.56=56%. If this is all of the information we have about the population box, and we want to estimate the percentage of 1’s in the box, our best guess would be 56%. Notice that this sample value p = 56% is 4 percentage points below the true population value π= 60%. We say that the random sampling error (or simply random error) is -4%.

More Related