Two Aspects Of An Outdoor Misting System

1. Two Aspects Of An Outdoor Misting System Growing concerns related to energy use, water consumption, and climate change have necessitated the creation and production of more environmentally friendly cooling equipment that can efficiently cool the surrounding environment without damaging it and using moderate energy consumption. The use of an Outdoor Misting System is one such option that is gaining acceptance in open areas where people visit frequently. Common examples of such areas are amusement parks, restaurants with patio seating, open air shopping malls, and other crowded public locations. These highly-pressurized misters and foggers are often concealed behind decorative plants or structural designs. Installing a mixing system is not a complicated task and most DIY'ers can perform it on their own. But effective utilization and getting the most out of your misting system requires significant planning. Misting systems have their pros and cons which need to be looked into before you decide to install one. This blog was composed with intention to inform readers about how an outdoor misting system has its own benefits as well as disadvantages. For the pros, evaporative cooling is its purpose which saves both energy and water. You must be thinking that how Outdoor Misting System saves water when it is releasing water into the air? A small misting pump consumes around 750 watts of electricity and 15-30 gallons of water per hour which is way lower than what your standard air-conditioner consumes (3-5 kilowatts per hour which is produced by 75-125 gallons of water). Quite conservative, isn't it? As mentioned before, once you have got your misting system all planned up, they are very easy to install and operate.

2. These systems are flexible and customized according to your needs and requirements. As for the cons, misters can is an investment and can be considered luxury expenditure. To do it right, a high-pressure pump is important and this can be costly. However, fine water droplets cannot form without high pressure misting pumps and this is an expense compared to a low pressure misting systems which operates on natural water supply only. As you can see, every coin has two sides and this is true about misting systems. However, this is a far better and efficient alternative as compared to traditional cooling methods which impact the environment in much greater ways. For more information you can visit our website http://www.koolfog.com Follow Us: