1 / 36

Types of Chemical Reactions and Solution Stoichiometry

Types of Chemical Reactions and Solution Stoichiometry. Chapter 4 of AP chemistry. 4.1 Water (the universal solvent). Water can be used to dissolve a wide variety of substances. This is in large part due to the polarity of the water molecule. Let’s look at the structure of water. Polarity.

kobe
Download Presentation

Types of Chemical Reactions and Solution Stoichiometry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Types of Chemical Reactions and Solution Stoichiometry Chapter 4 of AP chemistry

  2. 4.1 Water (the universal solvent) • Water can be used to dissolve a wide variety of substances. This is in large part due to the polarity of the water molecule. • Let’s look at the structure of water

  3. Polarity • This polarity results in water being able to “attack” the cations and the anions of ionic compounds.

  4. 4.2 Strong, weak, and non-electrolytes • Ions present in solution facilitate the conduction of electricity. • Since pure water is a covalent molecule, it is a very poor conductor of electricity. • Tap water conducts electricity because it contains dissolved ions. • If you don’t believe me, ask yourself why there’s a multi-million dollar water softening industry, or wikipedia “hard water”.

  5. Strong electrolytes, focus on acids • A strong electrolyte is an acid, base, or ionic compound that dissolves fully. • Examples of strong acids (strong electrolytes) • Perchloric acid HClO4 • Hydroiodic acid HI • Hydrobromic acid HBr • Hydrochloric acid HCl • Sulfuric acid H2SO4 (first dissociation only) • Nitric acid HNO3 I cut and pasted this list from wikipedia.

  6. What’s an acid • You may have notices that the strong acids were simply ionic compounds who’s cation are hydrogen. That’s an acid in a nutshell. • If you want a technical definition feel free to click here. • Acids release H+ ions (protons). These protons tend to steal electrons from other compounds, or metals and are attracted to regions of negative charge (duh).

  7. Strong electrolytes, focus on bases • Examples of strong bases (strong electrolytes) • Potassium hydroxide (KOH) • Barium hydroxide (Ba(OH)2) • Cesium hydroxide (CsOH) • Sodium hydroxide (NaOH) • Strontium hydroxide (Sr(OH)2) • Calcium hydroxide (Ca(OH)2) • Lithium hydroxide (LiOH) • Rubidium hydroxide (RbOH) I cut and pasted this list from wikipedia.

  8. What’s a base • A base is the counter part to the acid. A base is an ionic compound who’s anion is OH-. • If you want a technical definition feel free to click here. • Bases produce OH- ions. The OH- tend accept/steal protons (H+) from compounds and are attracted to regions of positive charge (duh).

  9. Weak electrolytes • These compounds do not dissolve completely. • When tested use this rule of thumb: If it’s an acid or a base and it’s not strong, it’s a weak electrolyte. • Click here for a short and easy list of strong and weak electrolytes. It’s a good page!!! • For now if an ionic compound is soluble think of it as a strong electrolyte.

  10. Non-electrolytes • Non-electrolytes do not form ions in water and hence do not permit the water to conduct electricity. • Common non-electrolytes include • Sucrose • Ethanol • Methanol • Pretty much all substances that remain covalent molecules when dissolved in water.

  11. 4.3 Composition of Solutions • The concentration of a solution is very important. • The more sugar you dissolve in sweat tea the better it will taste. • Concentration is expressed in “molarity” M • NOTE: Liters, not ml, of solution

  12. Example • How many grams of NaOH would you need to add to 100.0 ml volumetric flask to make a 0.100 M NaOH solution? Given: V = 100.0 ml M = 0.100 M NaOH

  13. Example Given: V = 100.0 ml M = 0.100 M NaOH Want: Grams of solute • First solve for moles of solute • Next, convert moles to grams

  14. Examples problems • Find the molarity of a solution composed of 85.84 g of CuSO4 in 250.0 ml of solution • If 450.0 ml of 2.000 M CaCO3were evaporated, how many grams of CaCO3 would be left behind? • A 10.00 ml volumetric flask weighs 25.18 g. A NaCl solution of unknown molarity is filled to the line and then completely evaporated. If 28.62 g remain what was the molarity? Answers: 1) 2.151M 2) 90.08g CaCO3 3) 5.886M

  15. Dilutions • This isn’t hard at all. Simply follow the equation below M1V1 = M2V2 • Example: If you take 300. ml of a 3.00 M AgNO3 and add 700. ml to it what is the new molarity?

  16. 4.5 Precipitation reactions • A precipitation reaction occurs when two soluble ionic solutions are mixed and a precipitate is formed. • Example: Both NaCl and AgNO3 are soluble in water. However, if you mix the two a precipitate of AgCl will form. This is express as: • The (aq) means aqueous (dissolved, still in solution) • The (s) stands for solid (precipitate)

  17. Double replacement • Virtually all precipitation reactions are double replacement reactions. • This is when cations and anions simply swap partners.

  18. 4.6 Net ionic equations • Take the example below: • The complete ionic equation is below (it’s long):

  19. 4.6 Net ionic equations • Writing the complete ionic equation is awful! • Note that NH4+ and Cl- appear on both sides of the reaction and do nothing. Because they do nothing they’re called spectator ions. • In the net ionic equation you simply leave out the spectator ions: • This is much easier to read and write.

  20. Solubility rules • It’s awful, but you’re just going to need to memorize the solubility rules. • Check out this matching game. • To help this concept sink in, we’ll make nearly 100 mixtures. • YOU NEED TO HAVE THESE RULE MEMORIZED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! • Play the game, do whatever, but memorize them! (pg 152 has the rules)

  21. You also need to do stoichiometry • Example if you mix 325 ml 3.00M Ba(OH)2 and 600. ml of 1.00 M Al(NO3)3 what precipitate would form? What mass? • First, write the net ionic equation • Next, determine the moles of each ion

  22. # of moles • Multiply the OH- by two because each mole of Ba(OH)2 has two moles of OH-bonded to it. • Now find the limiting reagent. Recall the net ionic equation:

  23. Limiting regent • YOU STILL NEED TO DIVIDE BY THE COEFECENT • Aluminum is the limiting reagent. Only 0.600 moles of Al(OH)3 will be produced.

  24. Finished • If you know that 0.600 mole of Al(OH)3 will be produced simply go from moles to grams. • And you’re done

  25. Sample problems • If you mix 10.00 ml 18.00M H2SO4 and 600. ml of 1.00 M Ba(NO3)2 what precipitate would form? What mass? • If you mix 1.25 L 0.50M FeCl3 and 100. ml of 6.00 M Ba(OH)2 what precipitate would form? What mass?

  26. 4.8 Acid-Base reactions • Acids produce H+ ions • They donate protons • Bases produce OH- ions • They accept protons • When an acid and base are mixed they produce water. See below:

  27. Strong bases and acids • A strong base, like NaOH, will strip a strong or weak acid of all it’s protons. • Example: If H3PO4 (weak acid) is mixed with an excess of NaOH what will occur? • Under normal circumstances H3PO4 would not disassociate completely into H+ and H2PO4-. Only a small % would disassociate. • However, as soon as a proton leaves H3PO4 it immediately is attacked by the OH- from NaOH.

  28. Neutralization • The OH- ions will continue to grab up H+ ions until the OH- ions run out or until the H+ ions run out. • The second an H+ ion breaks off of the H3PO4 an OH- ion gets it and becomes water.

  29. Neutralization • Example: How much 1.00 M standard NaOH would be required to neutralize 50.0 ml of 18.00 M sulfuric acid? • First write the equation: • Next, solve for moles of H2SO4:

  30. Neutralization • Now solve the stoichiometry for mole NaOH: • Finally, solve for the volume of NaOH:

  31. Measuring acid content, pH • The standard way that acidity is measured is on the pH scale. • A pH of 7 in neutral. • 1 is very acidic • 14 is very basic • pH is measured with litmus paper or with a pH meter. • We’re going to use a pH meter in lab today

  32. Measuring acid content, indicators • pH can also be measure using indicators. • An indicator is a chemical that will change color when a specific pH is reached. • The indicator that we are using in lab today is called phenolphthalein. • When the pH exceeds 8.2 (more or less neutral) the color will change from clear to fuchsia.

  33. Measuring acid content, indicators • When your phenolphthalein turns this color you know that you’ve arrived. • Watch out, it comes quick

  34. We’re going to lab!!! • It has been said that soft drinks contain a lot of acid. But exactly how much acid is in there? • Ever wondered? Well, regardless, you’re about to find out. Because… We're going to lab!!!

More Related