1 / 16

Fast, Asynchronous SRAM

Fast, Asynchronous SRAM. Discussion D8.3. buff3.vhd. en. library IEEE; use IEEE.STD_LOGIC_1164. all ; entity buff3 is generic (width:positive); port ( input : in STD_LOGIC_vector(width-1 downto 0); en : in STD_LOGIC;

knewson
Download Presentation

Fast, Asynchronous SRAM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fast, Asynchronous SRAM Discussion D8.3

  2. buff3.vhd en library IEEE; use IEEE.STD_LOGIC_1164.all; entity buff3 is generic (width:positive); port( input : in STD_LOGIC_vector(width-1 downto 0); en : in STD_LOGIC; output : out STD_LOGIC_vector(width-1 downto 0) ); end buff3; architecture buff3 of buff3 is begin output <= input when en = '1' else (others => 'Z'); end buff3; input output

  3. RAM Module

  4. RAM1

  5. library IEEE; use IEEE.std_logic_1164.all; use IEEE.std_logic_arith.all; entity clock_pulse2 is port ( inp, cclk, clr: in std_logic; outp1: out std_logic; outp2: out std_logic ); end clock_pulse2;

  6. architecture clock_pulse2_arch of clock_pulse2 is signal delay1, delay2, delay3, delay4: std_logic; begin process(cclk, clr) begin if clr = '1' then delay1 <= '0'; delay2 <= '0'; delay3 <= '0'; delay4 <= '0'; elsif cclk'event and cclk='1' then delay1 <= inp; delay2 <= delay1; delay3 <= delay2; delay4 <= delay3; end if; end process; outp1 <= delay1 and delay2 and (not delay3); outp2 <= delay1 and delay2 and delay3 and (not delay4); end clock_pulse2_arch;

  7. Counter clock Address WE BTN2

  8. library IEEE; use IEEE.STD_LOGIC_1164.all; use IEEE.STD_LOGIC_unsigned.all; entity ram1 is port( mclk : in STD_LOGIC; BTN3 : in STD_LOGIC; BTN2 : in STD_LOGIC; BTN0 : in STD_LOGIC; SW : in STD_LOGIC_VECTOR(7 downto 0); AN : out STD_LOGIC_VECTOR(3 downto 0); AtoG : out STD_LOGIC_VECTOR(6 downto 0); LD : out STD_LOGIC_VECTOR(7 downto 0); A : out STD_LOGIC_VECTOR(17 downto 0); dp : out STD_LOGIC; LB1 : out STD_LOGIC; UB1 : out STD_LOGIC; CE1 : out STD_LOGIC; OE : out STD_LOGIC; WE : out STD_LOGIC; IO10 : inout STD_LOGIC_VECTOR(15 downto 0) ); end ram1;

  9. begin dp <= '1'; clr <= BTN3; OE <= oen; IO10(7 downto 0) <= IOdata; IO10(15 downto 8) <= "ZZZZZZZZ"; A <= qout; LD <= qout(7 downto 0); WE <= outp1 nand BTN2; oen <= BTN2; UB1 <= '1'; LB1 <= '0'; CE1 <= '0'; ground <= "00000000"; load <= not BTN2;

  10. U0: clock_pulse2 port map (inp => BTN0, cclk => cclk, clr => clr, outp1 => outp1, outp2 => outp2); U1: count18 port map (clk => outp2, clr => clr, q => qout); U2: x7segb port map (x(15 downto 8) => ground, x(7 downto 0) => xin, clr => clr, cclk => cclk, AN => AN, AtoG => AtoG); U3: buff3 generic map(width => bus_width) port map (input =>SW, en => oen, output => IOdata); INreg: reg generic map(width => bus_width) port map (d => IOdata, load => load, clr => clr, clk =>outp2, q => xin); end ram1;

More Related