1 / 32

Update on Mercury Calibration Gas Standards and Traceability

Update on Mercury Calibration Gas Standards and Traceability. Scott Hedges US EPA, Clean Air Markets Division 2009 EPRI CEM User Group Conference St. Louis, MO May 14, 2009. Background .

kirby
Download Presentation

Update on Mercury Calibration Gas Standards and Traceability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Update on Mercury Calibration Gas Standards and Traceability Scott Hedges US EPA, Clean Air Markets Division 2009 EPRI CEM User Group Conference St. Louis, MO May 14, 2009

  2. Background • A significant collaborative effort between EPRI, industry, and EPA has been ongoing and has produced a technically feasible and implementable mercury monitoring program • EPA is fully committed to continuing this collaborative effort • Providing NIST-traceable mercury (Hg) calibration gas standards and protocols is one of the remaining technical issues being addressed

  3. Update on NIST-Traceable Hg Calibration Gas Standards • EPRI, NIST, OAQPS, ORD, CAMD and industry continue their collaborative work to provide NIST traceability for elemental and oxidized mercury calibration standards • To date, NIST has certified and recertified their NIST Prime elemental Hg generator, has certified the first round of the Vendor Prime generators. Vendor Prime generator recertification is expected to begin in the near future. • Manufacturers have also shipped elemental mercury gas cylinders to NIST to establish NIST traceability. This work is in progress. • EPA has also worked with Western Research Institute, ORD, NIST and vendors to conduct variability, stability, and uncertainty testing of mercury gas generators and cylinders

  4. Phased Approach to NIST Traceability • We are implementing a phased approach to NIST traceability • The first phase (last year and the first period of 2009) was devoted to conducting a field and laboratory Hg calibration gas demonstration program and writing interim elemental and oxidized Hg traceability protocols • The second phase (beginning shortly) is devoted to certifying Hg calibration gas generators to establish NIST traceability

  5. Mercury Calibration Gas Field and Laboratory Demonstration Program • EPRI sponsored and provided funding to conduct the Hg calibration gas field and laboratory demonstration program that was completed earlier this year • The program was a collaborative effort between EPRI, calibration gas and monitoring equipment vendors, NIST, RMB, Emission Monitoring Inc., WRI, participating utilities, and EPA • Key elements of the program included: • An assessment of the field performance of Hg gas generators (the program focused on the elemental Hg generators) • An evaluation of the stability of elemental Hg compressed gas cylinders

  6. Demonstration Program • The demonstration program informed the development of the Hg gas traceability protocols by: • Providing data on the quality (stability, repeatability, variability) and uncertainty of elemental Hg gas generators and cylinders • Developing and testing draft bracketing procedures to compare elemental Hg gas generators and cylinders in the laboratory and in the field against “certified” (NIST-traceable) reference generators • The demonstration program determined certification acceptance criteria, QA objectives, frequency of recertification, and qualification criteria for elemental Hg calibration gas standards

  7. Demonstration Program • Developed ongoing QA procedures and finalized procedures/spreadsheets to calculate uncertainty • Provided input to the procedures written into the interim traceability protocols • Developed and set-up the necessary infrastructure for affected sources and equipment vendors to implement the field program and ultimately the traceability protocols

  8. How Traceability Works

  9. Mercury Gas Standard Traceability • A NIST-traceable Hg gas standard (produced by a generator or cylinder) is one that has been compared and certified directly (without intermediate standards) to another Hg gas standard that has been certified by NIST at its laboratories • Traceability can be simply defined as an “unbroken chain of comparisons” to a primary NIST standard • Gas standards must be traceable to a measured, not theoretical, concentration

  10. Mercury Calibration Gas Standards What We Need: • Mercury calibration gas standards of known quality and uncertainty • How well Hg generators and cylinders perform under the “best” conditions, and in the field

  11. Mercury Calibration Gas Standards Definition and use of uncertainty: • A statistical predictor of closeness to a true measurement or reference (minus bias or systematic error) • Uncertainty is often confused with measurement error which includes systematic error or bias

  12. Mercury Calibration Gas Standards Definition and use of uncertainty : • Combined uncertainty is the sum of each individual uncertainty propagated down the “unbroken chain”(e.g, uncertainty of NIST Prime +Vendor Prime + any transfer standard such as a certified Field Reference generator + field or User generator) • Expanded uncertainty includes a coverage factor or multiplier to the combined uncertainty that is essentially comparable to a confidence interval (for this program a coverage factor of 2 was used)

  13. Interim Mercury Gas Traceability Protocols • We are finalizing interim traceability protocols for elemental and oxidized Hg gas generators and expect to make them available to states and other groups for use within the next month • The procedures of these interim protocols will be replaced when final EPA traceability protocols for elemental and oxidized Hg generators are completed

  14. Interim Elemental Mercury Gas Traceability Protocol

  15. NIST Traceability for Elemental Hg Generators • NIST calibrates individual set points (calibration concentrations) that are used to certify Vendor Prime generators, vendors certify Field Reference generators which in turn are used to certify elemental Hg generators already in the field • NIST certifies Vendor Prime generators against their NIST prime generator that has been certified using ID-ICP/MS

  16. NIST Traceability for Elemental Hg Generators • It is the responsibility of the vendor to qualify and certify their field generators using the procedures in the interim traceability protocols • It is the responsibility of the end user to perform the quality assurance checks once their generators have been certified and placed into field operation

  17. Interim Elemental Hg Gas Protocol • Establishes the quantitative output (i.e., “calibration”) of elemental Hg generators • Determines the expanded uncertainty of the gas standards produced by elemental Hg generators • Specifies the maximum allowable uncertainty for elemental mercury gas generators • Establishes generator output traceability to NIST by means of an unbroken chain of comparisons between each generator and a NIST-certified generator

  18. Interim Elemental Hg Protocol – Qualification Tests • Qualification tests are required for each elemental Hg generator model • Tests that are routinely performed by the manufacturer will suffice, provided that the test results demonstrate that the generator model has adequate stability and repeatability and can operate reliably over a stated range of conditions (e.g., back pressures, ambient temperatures, and other applicable factors) • These tests may either be performed on each individual generator or on selected generators that are representative of the model • The manufacturer must provide the end-user with a statement of disclosure that explains proper set-up and use of the generator and documents the range of conditions over which reliable generator operation can be expected.

  19. Interim Elemental Hg Protocol – Certification Tests • The interim elemental Hg gas protocol specifies the procedures for certifying elemental Hg generators (i.e., procedures to establish the “NIST traceable” quantitative output) • The output from the candidate generator can be compared directly to the output from a certified Vendor Prime at the particular concentrations required by the user, by means of the “bracketing” procedure*. • Alternatively, a candidate generator can be certified at the field location where it is used, or at another convenient location, by direct comparison with a Field Reference generator that has been previously certified by direct comparison to a Vendor Prime. * A bracketing procedure is a means of directly comparing the outputs of two elemental Hg gas generators. The purpose of the procedure is to certify the output of a “candidate” generator with the output from a certified generator.

  20. Interim Elemental Hg Protocol - QA/QC and Recertification • Following generator certification, periodic QA/QC procedures are required to verify that the generator continues to provide accurate and reliable calibration standards. • These checks and procedures may be performed using a certified Field Reference generator or other device (e.g., compressed gas cylinder, sorbent trap, etc.) • Recertification of a generator is typically required every 8 calendar quarters to maintain NIST traceability. Recertification may also become necessary when certain malfunctions, operating conditions, or other factors identified by the user or manufacturer occur.

  21. Interim Oxidized Mercury Gas Traceability Protocol

  22. Oxidized Hg Gas Traceability The interim oxidized Hg gas traceability protocol reflects the current procedures for generating and quantifying mercuric chloride (HgCl2) calibration standards. HgCl2 is a form of oxidized mercury.

  23. Traceability of HgCl2 Generators • An established approach for direct measurement of HgCl2 gas standards is not currently available • The interim oxidized mercury gas protocol relies on establishing NIST traceability of the individual components of the HgCl2 generating systems followed by calculation of a combined and expanded uncertainty. • Work is underway by ORD, NIST and others to evaluate one or more direct HgCl2 measurement approaches

  24. Traceability of HgCl2 Generators • Once completed, this direct measurement approach will be used in the final oxidized Hg gas protocol • The interim traceability protocol provides procedures to: • Establish the quantitative performance (i.e., “calibration”) of components of HgCl2 generators • Determine the uncertainty contributed by each of these components in order to calculate the reference value and combined expanded uncertainty of the standards produced by the HgCl2 generators

  25. Traceability of HgCl2 Generators • The reference value for an evaporative HgCl2 generator output concentration at specific operating conditions is based upon the feed rate and concentration of the HgCl2 solution and the associated volumetric diluents, including the contribution from evaporated water • The combined uncertainty for each reference value is based on the combined individual standard uncertainties of the HgCl2 solution, the HgCl2 solution feed rate, additional water feed rate (if any) and the carrier/diluent volumetric flow. The expanded uncertainty is calculated using a coverage factor of 2.

  26. Traceability of HgCl2 Generators • Two basic types of HgCl2 generators are currently in use: • An evaporative HgCl2 generator, which produces gas standards of known concentration by vaporization of aqueous solutions of HgCl2 and quantitative mixing the resultant vapor with a diluent carrier gas; • A reactor or oxidizer that converts the output from an elemental Hg generator to HgCl2 by means of a chemical reaction with chlorine gas.

  27. Certification of Evaporative HgCl2 Generators • Generator certification is based on calculating the uncertainty of the following components: • Working solution concentration • Liquid feed rates • Carrier gas flow rate • The HgCl2 concentration of the working liquid feed solution is established through the use of commercially available NIST-traceable HgCl2 liquid standards • Liquid feed rates are established by gravimetrically calibrating the feed rate meter relative to a NIST- traceable mass using a balance • Certification of evaporative HgCl2 generators requires: • Traceability to NIST for each of the inputs • Determining combined and expanded uncertainty of the generated concentrations

  28. Certification of Generators That Convert Elemental Mercury to HgCl2 • Certification is based on the reference and uncertainty values from the certified elemental Hg generator • Chlorine dilution and humidification must be taken into account to determine the reference value of the HgCl2 concentration • The combined uncertainty of the HgCl2 calibration standards is calculated based on the uncertainty of the elemental Hg generator, the water vapor dilution (if applicable), the chlorine dilution, and possibly the reactor (oxidation) efficiency

  29. Quality Assurance for HgCl2 Generators • Performance assessments: • For CEM systems with independent elemental Hg and evaporative HgCl2 generators, the daily calibration error test and weekly system integrity check constitute direct comparisons of the two generators with the system integrity check results used to determine if the evaporative HgCl2 generator is performing within acceptable tolerances. • For HgCl2 generators that convert elemental Hg, acceptable performance is based on periodic checks of the oxidation efficiency

  30. Recertification of HgCl2 Generators At a minimum, HgCl2 generators shall be recertified at least once every 8 calendar quarters

  31. Conclusions • A significant collaborative effort between EPA, EPRI, NIST, industry and others is near completion to provide traceable mercury calibration gas standards and protocols • Interim traceability protocols are expected to be available within a month

  32. Questions? Comments? Thank You

More Related