1 / 11

draft-francois -segment-routing-ti-lfa- 00

draft-francois -segment-routing-ti-lfa- 00. Pierre Francois, IMDEA Networks Institute Clarence Filsfils , Ahmed Bashandy , Cisco Systems Bruno Decraene , Stephane Litkowski , Orange IETF 89, SPRING WG. Topology Independent Fast Reroute using Segment Routing. Fast Reroute

kira
Download Presentation

draft-francois -segment-routing-ti-lfa- 00

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. draft-francois-segment-routing-ti-lfa-00 Pierre Francois, IMDEA Networks Institute Clarence Filsfils, Ahmed Bashandy, Cisco Systems Bruno Decraene, Stephane Litkowski, Orange IETF 89, SPRING WG

  2. Topology Independent Fast Reroute using Segment Routing • Fast Reroute • Local protection of traffic against sudden failuresof links and nodes • IP-FRR behavior when SR comes into play • Topology Independent coverage • Full coverage for link and node protection • Segment Routing • Leveraging the SR architecture allows to enforce any failover path

  3. Which failover path? • New in IP-FRR: Post-convergence path from the PLR to the destination B C E A D F 100 100 100 100 PE1 PE2 LFA TI-LFA

  4. Why that choice? • Post-convergence path • Typically in line with capacity planning • Easy to predict • SR: No need for TLDP sessions • Useless to favor LFA over RLFA over… • Easier to provide the path that the operators actually want

  5. Exercise • draft-ietf-rtgwg-lfa-manageability-01 • Cases where default IP-FRR behavior is not ideal • Need for manageability to enforce an ideal path • Turns out to always be the post-convergence one… • Common sense • The operator configures metrics to obtain optimum paths for its services (bw, delay, …) • The PLR should respect such objectives upon FRR

  6. How to do TI-LFA • Enforcing loop-freeness on post-convergence path • Where can I release the packet? • At the intersection between the new shortest path and the per-destination Q-Space of the destination • How do I reach the release point? • By chaining intermediate segments that are assessed to be loop-free • Maths: homework • How many segments?

  7. How many segments? • Link protection, symmetric topology: • Maximum 2, guaranteed • Most often, 1 is enough • When a post-convergence LFA is available: 0 • Link protection, asymmetric topology • Many asymmetric nets where 2 was the max • A few cases here and there were a bit more are needed for a couple of links • Node protection • Never more than 4, rarely more than 2 • -01 contains numbers • Eager to increase the number of case studies

  8. Protecting AdjSID’s • Packet with 2 top ADJ SIDs [AD, DF, …] • The packet should go to D • Repair: [C, D, DF, …], oif B B C E A D F

  9. Protecting AdjSID’s • Packet with 1 top ADJ SID [AD, F, …] • Option • The packet could go to D • Repair: [C, D, F, …], oif B • The packet could go directly to F • Repair: [C, F, …], oif B B C E A D F

  10. Summary • FRR for Segment Routing • Node and Adjacency Segments • No more TLDP session required for FRR purposes • Full coverage • More than 2 segments are rarely needed • Post-convergence paths • Better fit with capacity planning • Respect of the ISP policy • 1 implementation available • At least one more on the way

  11. Thank you!

More Related