1 / 18

ECEN 5007 9/3/02 Vishwas Ganesan

Low Voltage Low Power constant - g m Rail to Rail CMOS Op-Amp with Overlapped Transition Regions. ECEN 5007 9/3/02 Vishwas Ganesan. Motivation. Low Supply Voltage Operation Constant g m Low power consumption making it suitable for portable applications. Reduced chip area.

kioshi
Download Presentation

ECEN 5007 9/3/02 Vishwas Ganesan

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Low Voltage Low Power constant - gm Rail to Rail CMOS Op-Amp with Overlapped Transition Regions ECEN 5007 9/3/02 Vishwas Ganesan

  2. Motivation • Low Supply Voltage Operation • Constant gm • Low power consumption making it suitable for portable applications. • Reduced chip area.

  3. Why this paper came up ? • Complementary differential pairs operate in parallel. • This leads to one pair turned on and one off when input is near rails and both pairs on at the middle of the input range leading to gm being twice the value than the former case

  4. Other Circuit Proposals • Variation in the tail current in the differential paper doubling gm when only one pair is active. • Comparing currents from p and n differential pairs and the maximum current between them is selected and processed for gm constant by maximum-selecting circuitry. • Current bleed circuits • Square root circuit

  5. Difficulties with other circuits • Increase in slew rate due to increase in tail current. • Extra circuitry – Signal processing circuits and many more current mirrors. • All this leads to complication, Power consumption and more die.

  6. Complementary Input Stage Gm is constant if √ (βnIsn) + √ (βpIsp) = constant • Cutoff : Isn = 0 Vss ≤ Vcm ≤ Vn- • Transition Isn = Isn ( Vcm ) Vn- < Vcm ≤ Vn+ • Saturation Isn = ßMBn ( VGMBn – Vss – Vt n) 2 Vn+ < Vcm ≤ Vdd

  7. General Transition graph • This shows the transition region overlap of a general n-p differential pair.

  8. Design

  9. Design

  10. Complementary Input Stage with DC Level Shifter • Use a dc level shifter to shift the p-transition curve leftward to overlap the n-transition curve. • Vshift small  gm exceeds normal limit • Vshift large gm drops below limit • ∆ Voptimal yields constant Gm • 2VGMBN<∆Voptimal< 2VGMBN+ √(Isno/βM1)

  11. Plot Of gm vs Vcm

  12. OPAMP Circuit

  13. OPAMP Implementation • DC level shifters implemented by 2 pairs of PMOS source followers MS1-MS4 • Three stages • Complementary input stage • Folded cascoded stage M21-M28 provides high gain • Class AB output stage M30-M33 • MB1 and MB11 are biasing transistors.

  14. Frequency Response • Amplitudes and phase plots show unstability due to varying gm.

  15. My simulation results

  16. Simulation plots

  17. Paper Results

  18. Conclusions • DC level shifters can be used to overlap transition regions to obtain constant gm. • Low Power dissipation was achieved • Low supply voltages . • There is considerable gain achieved leading to CMRR improvement.

More Related