1 / 16

Overview about European and International Railway Standardisation / Innovativon and Standardisation

Overview about European and International Railway Standardisation / Innovativon and Standardisation. Rüdiger Wendt Secretary of ISO/TC 269 and CEN/TC 256 Moscow, 2012-10-17. Activity in European and international standards committees . National Standards Body . ISO/IEC. CEN/CLC.

kimo
Download Presentation

Overview about European and International Railway Standardisation / Innovativon and Standardisation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Overview about European and International Railway Standardisation / Innovativon and Standardisation Rüdiger Wendt Secretary of ISO/TC 269 and CEN/TC 256 Moscow, 2012-10-17

  2. Activity in European and international standards committees National Standards Body ISO/IEC CEN/CLC Technical Committee Delegate Mirror committees Working group Expert ISO/TC 269 and CEN/TC 256 Rüdiger Wendt IEC/TC 9 and CENELEC/TC 9X Bernard Lerouge 2

  3. European standards bodies CEN/CENELEC • Each country has one member in each standards body (usually the national standardization organization) • All organs, such as the general assembly, political and technical management committees, and standards committees, are open to all members • Affiliated standardization bodies and associated organizations have observer status

  4. Member countries in European standards bodies

  5. Objectives of European Standardisation Objective:Harmonization of national standards in all member states through uniform adoption of European Standards Mission:Lower trade barriers and create identical competititive conditions throughout the European Single Market

  6. New Approach • European Directives set out basic requirements for specific sectors • European Standards give substance to these basic requirements and provide technical solutions • Implementation of European Standards implies conformity with European Directives • New Approach Directives regulate products in major sectors of industry • Link to New Approach Homepage • Applicable Directives for the Railway sector are: • High-speed rail (96/48/EC) • Railways (2008/57/EC)

  7. Structure of CEN/TC 256

  8. Activities • Urban Rail • Fire Safety • Variable Gauges • Survey Groups for: • Maintenance Rolling Stock • Maintenance Infrastructure • NDT

  9. Standardisation and Innovation • Research projects can request a „Project Liaisons“ with the corresponding Technical Committee • This allows Project Representatives to participate in Plenary Meetings of a TC • Contributes to the work of the Working Group by direct involvement • Initiation of new standardisation activities • Identification of Standardisation needs by a Research project could be further developed in a TC or through Workshop Agreement (CWA) • Examples are: • TRANSFEU • TrioTRAIN • AcuTRAIN • For further help contact the Research Helpdesk by email: research@cencenelec.eu • www.cencenelec.eu/research

  10. MoU between CEN/CLC and ROS Standard • A common workshop took place in Brussels on 2012-06-28 involving representatives of the railway sector • A MoU shall be signed until end of 2012 • This would allow Russian Railway Experts to participate in European Rail Standardisation activities as Observer

  11. ISO/TC 269 Proposed first activities 1 of 4 • Standards applicable to the strategic development of the railways: • Standards that enable new project undertakers to adopt an optimum type of railway system • Standards that enable existing railway undertakers to confirm suitability of their system for International Standards • Standards that enable manufacturers to determine the essence of the requirement • Standards that enable passengers & residents along the railway to understand the social benefits of railway

  12. ISO/TC 269 Proposed first activities 2 of 4 • Standards that support the compatibility processes across the rail networks • Calculation methods for determining the size of rail vehicles and their clearance to the infrastructure (gauges) • Calculation methods for determining brake performance • Aerodynamics – methodology for determining safe operation • Running Behaviour – methodology for determining vehicle dynamic stability on a network • Longitudinal Dynamics compatibility with the infrastructure

  13. ISO/TC 269 Proposed first activities 3 of 4 • Standards that facilitate product development for infrastructure • For infrastructure related issues: design, materials, manufacturing processes, testing methods, these include: • Track geometry quality (Characterisation, Measuring devices and systems,…) • Track layout • Product for track building (Sleepers, bearers,…) • Proposed first work items are in the areas of: • Concrete sleepers • Switches and crossings • Track geometry quality

  14. ISO/TC 269 Proposed first activities 4 of 4 • Standards that facilitate product development for rolling stock • Vehicle structural requirements • Generic design requirements applicable to all Freight Wagons • Specific design requirements applicable to Tank Wagons • Automatic couplers • Gangways • Environmental conditions and environmental protection • Energy efficiency for Heating, Ventilation and Air Conditioning systems • Wheelsets (design, assembly,…) • Proposed first work items are in the areas of: • Vehicle structural requirements • HVAC (The purpose of this proposed standard is to specify performance requirements and tests for HVAC units for rolling stock, including energy consumption and energy efficiency.)

  15. Next Meeting • Kick-Off Meeting of ISO/TC 269 takes place on 2012-10-30/31 in Berlin

  16. Contact details Rüdiger Wendt Panoramaweg 1 34131 Kassel Germany Tel: +49 561 93567-40 email: ruediger.wendt@fsf-din.de

More Related