1 / 12

DØ Level 2 b eta Firmware, FPGAs, etc ….

DØ Level 2 b eta Firmware, FPGAs, etc …. Drew Baden University of Maryland April 26, 2001 http://macdrew.physics.umd.edu/cms/. MBUS. Xilinx XVC405E. PLX. CPU. Overview. Goal: Interface between MBUS and PCI Implementation Single large FPGA Xilinx XCV405-EM 10,800 logic cells

kiefer
Download Presentation

DØ Level 2 b eta Firmware, FPGAs, etc ….

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DØ Level 2 beta Firmware, FPGAs, etc…. Drew Baden University of Maryland April 26, 2001 http://macdrew.physics.umd.edu/cms/

  2. MBUS Xilinx XVC405E PLX CPU Overview • Goal: Interface between MBUS and PCI • Implementation • Single large FPGA Xilinx XCV405-EM • 10,800 logic cells • 573,440 bits true dual-port block RAM • 71,680 bytes, >4k MBUS words • 404 I/O pins (not including load, JTAG, etc.) BGA • Internal support for LVDS or PECL differential signaling @ 622 Mbps • 8 digital delay-locked loops (DLLs) per device • Eliminates clock skew for geographically separated modules • DLLs can provide 2x frequency multiplication • JTAG for boundary scans and “TAP” • Can use as an internal logic analyzer

  3. Overview (cont) • PCI Implementation • PLX 9054 PCI bus master interface • 32bit 33MHz PCI • 2 DMA enginers • Programmable burst management • Programmable interrupt generator • 3.3V tolerant • Asynchronous local bus/PCI bus • BigLittle endian conversion • 132MB/s theoretical bandwidth • How fast can it really go? • CMS group has built a PMC card with earlier version • They got ~110MB/s DMA burst • We need around 80MB/s • MBT can probably only send ~110MB/s • Well matched

  4. PLX 9054 • Local bus can run up to 50MHz • Has some onboard FIFOs • DMA only as a local bus master • This is ok – we can send it a message as a local bus slave to initiate DMA • Can limit this to • DMA Address • GO • DMA size • This can also be eliminated if we use fixed burst size • 3 words x 25ns (40MHz) is 75ns, very small overhead as long as DMA bursts are “large” • Ours are typically 10-20 estimated

  5. FPGA I/O pins • 15 VME: • 9 D0 specific I/O, 6 for geographic addressing • 32 ECL scalers out • 193 MBUS: • 5 MBUS arbitration: • BOSS in, BOSS out, BOSSREQ, BOSSGRIN, BOSSGROUT • 4 MBUS handshaking • DSTROBE in, DSTROBE out, DDONE in, DDONE out • 33 MBUS address • 1 MBAD direction, 32 MBAD • 129 MBUS data • 1 MBDATA dir, 128 MBDATA • 14 MOD_DONE lines • 8 Miscellaneous • RD_WR, RD_WR_DIR, START_LOAD, DONE_OUT, MB_RESET, AP_FIFO_EMPTY, EV_LOADED(0) in and out

  6. PLX M-mode bus J-mode is similar CCS# LCLK LFRAME# LINT# LRESETo# Add-on bus USERi USERo BB# BDIP# BG# BI# BIGEND# 89 signals BR# DP[0:3] LA[0:31] LD[0:31] MDREQ# RD/WR# RETRY# TA# TEA# TS# TSIZ[0:1] FPGA I/O pins (cont) • 19 Front panel • Clock, reset, 12 LEDs, 2 switches, 3 rotary switch • 32 Logic Analyzer test points • 89 Local Bus (aka “Add-on Bus”) Total Pin count: 380 Available on XCV405E: 404 • We will use them all, don’t worry!

  7. Comments on 405-EM • Current MBT firmware uses 10k100+10k50 • ~8000 logic cells total • 10,800 for 405-EM – 20% more resources • Currently 33% resource utilitization. • Will probably go up to 40%, call it 50% • Supports MBUS broadcast, MBUS PIO, FIFO reading, Cypress output, L2 Global output, VME, 10k50  10k100, etc. • Functionality for Xilinx 405-EM • MBUS side: • Data FIFO load (service MBUS broadcast) • PIO • PLX side: • FIFO read • PCI DMA transfer • PCI I/O to MBUS • Conclusion: • We do not expect this firmware to require significantly more resources than for MBT – it should fit ok with resources to spare

  8. FPGA Contingency • XCV812E • >x2 Logic Cells • x2 block RAM • x2 price! • This requires that we have a LOT of firmware simulated and synthesized this summer • This is well ahead of Sept schedule for boards • If it will not fit, we will know by Sept

  9. Firmware • Basic firmware modules: • “Local bus” side • ORSAY • MBUS side • UMD • Interface • Joint specification • 1 week late May scheduled meeting in Paris to iron out ORSAY Maryland M B U S L O C A L B U S

  10. Firmware Tools • HDL language • Both groups have experience in Verilog • Simulation • ORSAY uses Cadence • UMD uses Aldec • Synthesis • Agreement to both use Synplify

  11. Manpower • Orsay • In-house experts in Verilog and Xilinx • Engineers • UMD • In-house expert in Verilog (me) • Engineers expert in FPGA schematic coding • $20k in UMD budget for engineers to contribute to firmware • Hans Breden is taking Verilog class next week • UVA • Hirosky wants to learn!  • We will all remain flexible and chip in where we can • We believe we have enough manpower to succeed

  12. Conclusions • FPGA choice is sound • Some concern in number of resources • I like to have a lot of breathing room • <50% resource utilization appears to be a good upper limit • If we need more, we need to know “now” (summer) • PLX chip is excellent • Well tested and used in industry • Same for CERN CMS group (Attila Racz, on their web site) • Manpower appears to be sufficient • Firmware functionality lends itself to separation in development • Orsay does “Local bus” side • Maryland does “MBus” side

More Related