1 / 15

A BIST Scheme for FPGA Interconnect Delay Faults

A BIST Scheme for FPGA Interconnect Delay Faults. Chun-Chieh Wang, Jing-Jia Liou, Yen-Lin Peng , Chih-Tsun Huang, and Cheng-Wen Wu. Laboratory for Reliable Computing (LaRC) Department of Electrical Engineering National Tsing Hua University Hsinchu, Taiwan 30013. Outline. Introduction

kiara
Download Presentation

A BIST Scheme for FPGA Interconnect Delay Faults

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A BIST Scheme for FPGA Interconnect Delay Faults Chun-Chieh Wang, Jing-Jia Liou, Yen-Lin Peng, Chih-Tsun Huang, and Cheng-Wen Wu Laboratory for Reliable Computing (LaRC) Department of Electrical EngineeringNational Tsing Hua University Hsinchu, Taiwan 30013

  2. Outline • Introduction • Objective • Proposed BIST architectures • Experimental results • Conclusions

  3. Introduction • The causes of FPGA delay fault • More circuits operating at high speed • DSM processes have resulted in more defects affecting the delay • FPGA delay testing problem • Path delay fault model is not appropriate • Segment delay fault model is used • At-speed testing is practically difficult • Need BIST approach

  4. Objective • Why test the interconnects of FPGA? • Delay faults are mostly associated with interconnects • Universal testing method • Application-independent testing methodology • The objective: • A BIST scheme for interconnect delay faults with minimal clock skew effects

  5. Clock Skew Effect

  6. Proposed BIST Design (BIST1) • Assumptions: • The PUT has to be the longest path among all paths in the BIST • Ignore skew between FFs in a CLB

  7. BIST BIST BIST ORA ORA ORA ORA ORA ORA BIST BIST BIST BIST BIST BIST ORA ORA ORA First phase Second phase Test Result Observation • Readback mechanism • The two phase approach

  8. WE and NS Switch Testing Issues • The loop-back PUTs targeting WE and NS are too long • Shorter PUTs are connected between different CLBs • Need to validate clock skews

  9. Clock Skew Validation • Using tested paths to validate clock • Change test clock: T’CLK = TCLK + TSkew • Violations can be detected when they cause strobe time to be earlier than TPath • Shortest path has small TSlack to detect small violations

  10. Modified BIST Design (BIST2) • Assumptions: • The clock skews have been validated • The PUT is longest • Other paths have been tested

  11. BIST type Target segments # of TCs Total All wire segments 1 16 BIST1 NE, WS, WN, and ES switches 40 1 All WE, NS switches 24 All wire segments 1 16 NE, WS, WN, and ES switches BIST2 36 2 Clock skew between 2 adjacent CLBs 4 2 All WE & NS switches 16 Experimental Results • Target device: a 14x14 Xilinx Spartan Series FPGA • Only single-length lines are considered • After TC reduction • BIST1 has lower utilization than BIST2

  12. Segment Coverage • A metric to measure how much resources are covered by test configurations • BIST-based methods never cover segments involved with IOB

  13. Statistical Delay Defect Coverage • Use Poisson distribution to model the fault distribution • Adopt a Monte Carlo process to produce samples • Effective statistical delay defect coverage (ESDDC) = Sdetected / Sfailed • Sdetected: total failed samples that have been detected • Sfailed: total failed samples

  14. ESDDC Sample count: 10K Defect count (mean): 1.3 Slack: 10% of segment spec. FPGA size: 14 x 14

  15. Conclusions and Future Work • We have proposed new BIST designs for FPGA interconnect delay faults • At-speed testing • Without being affected by clock skew • Easy implementation on different FPGA architectures • Test configurations are generated automatically • Future work: interconnect delay fault diagnosis

More Related