1 / 15

Controls for Linac Parallel Session 2/6/07

Controls for Linac Parallel Session 2/6/07. John Carwardine ANL. Controls from RDR to EDR…. Develop RDR models into engineering design. Validate/prototype key concepts in RDR models, eg Network architecture. Front-end model, technical system interfaces.

kermit
Download Presentation

Controls for Linac Parallel Session 2/6/07

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Controls for Linac Parallel Session 2/6/07 John Carwardine ANL Global Design Effort

  2. Controls from RDR to EDR… • Develop RDR models into engineering design. • Validate/prototype key concepts in RDR models, eg • Network architecture. • Front-end model, technical system interfaces. • Synchronous 5Hz feedback infrastructure. • Standards, standardization, QA. • Diagnostic Interlock Layer. • Perform targeted R&D where it is needed, eg • RF field regulation (phase & amplitude). • High availability implementation. • Fault detection and recovery. • Controls & LLRF support for test facilities. Global Design Effort

  3. Linac specific issues • Data archiving and collection model. • Distribution of RF phase reference • Feedback infrastructure. Global Design Effort

  4. Physical model from RDR Some items of note: • Physical model identifies some technology (eg ATCA), but is not technology dependent. • No software framework selected, but we assume derivation from an existing framework. • Assessments indicate that future ‘commodity computing’ will meet performance requirements. • Some design concepts require validation during EDR phase. Global Design Effort

  5. Unknowns… • Level of effort available from each region • Controls RDR related effort has been small, and largely focused in Americas region. • Looking to expand participation. Must find overlap between needs of ILC EDR efforts and interests of collaborating institutions. • Actual work package content could change depending on the participation. • Americas planning for FY08 identified a need for 10+ FTEs for controls on EDR and related R&D • Assumes similar participation from other regions. • Does not adequately cover all anticipated work packages, eg for RDR validation & protypying RDR design concepts. Global Design Effort

  6. Controls work packages “To Do” • We have a list of top-level objectives, and we have some work packages identified. • Have not collected input from all regions and/or all interested parties. • Does not take credit for related activities (XFEL, ITER, etc). • How best to apportion work packages…? So far, we have not substantially apportioned specific work to specific labs/regions/groups. • How to incorporate needs and interests of potential collaborators…? Global Design Effort

  7. Integration with test facilities • WPs to provide controls & LLRF for NML, XFEL, etc will presumably come from facility project managers. • Using beam-based test facilities, but they also provide a necessary test bed for controls R&D. Global Design Effort

  8. WP model… • Topic: High Availability Control Systems • Top-down objectives and initiatives, eg • Investigate, evaluate, and demonstrate candidate high availability design techniques. • Investigate ATCA as a candidate platform for instrumentation electronics. • Bottom-up work packages can come from many sources: • Controls or ILC leadership • Lab proposals • Collaborative contributions • Overlapping interests with other activities. Global Design Effort

  9. Examples of bottom-up WPs • Controls leadership • MOU between SLAC and University of Illinois (UIUC) for investigating ATCA analog & digital performance, cabling, shelf manager, etc. • Proposal driven • Proposal from LBNL to develop prototype RF phase distribution system. • Proposal for x-ray based alignment system. • Implement bpm electronics in ATCA crate. • Port EPICS to ATCA, implement fail-over of IOC from machine to machine. • Coincidence of needs with other activities • XFEL LLRF developments. • Precision timing and RF phase distribution for APS picosecond x-ray source. • ITER remote access / remote control needs. Global Design Effort

  10. High Availability • HA is a requirement for all the technical systems. • Need to investigate techniques, implications, and cost-benefit for meeting reliability requirements. • Control system hardware & software are both impacted. • Methodology component: • Design techniques, robust design. • Quality Control / extensive testing. • Standardization. • Engineering component: • Reliably detect and then recover from faults. • Introspection, diagnostic tools,… • Redundancy, hot spares, remote power on/off,… Global Design Effort

  11. HA technical working group…? • HA issues apply to multiple technical systems. • We should attempt to solve the issues collectively. • Technical groups need to address HA in their R&D. • An HA Technical Working Group would serve to guide and collect HA related activities. Global Design Effort

  12. WP example: HA control systems • Investigate high availability design approaches, implications, and cost-benefit for the ILC control system. • Example work package items: • Develop & evaluate controls failure modes and machine impact. Determine priorities for meeting overall availability. • Explore techniques such as virtual machine migration (Xen), clustering (heartbeat), redundant I/O controllers, etc. using [EPICS, DOOCS, Tango, …] on ATCA. • Evaluate and prototype second-tier HA techniques, eg: automated diagnosis, configuration management, coding standards. • Build vertical demonstration of all tiers of control system with HA techniques applied. Perform fault injection to test and evaluate. • Evaluate and prototype “Shelf-manager’ functionality in control system infrastructure for technical system fault management. Global Design Effort

  13. WP example: ATCA evaluation • Investigate suitability of ATCA as a high availability compliant electronics platform for ILC control system. • Example work package items: • Prototype a precision instrumentation digitizer for beam position monitors. Evaluate analog & digital performance. • Prototype electronics functions to the AMC mezzanine card, and integrate with the IPMC diagnostic module. Write software drivers. • Evaluate cabling options for ATCA and AMC cards • Port [EPICS, DOOCS, Tango,…] to the ATCA platform, integrate and evaluate “Shelf Manager” functionality. Global Design Effort

  14. WP example: diagnostic processor • The diagnostic processor (DP) is conceived as the key element in the Diagnostic Interlock Layer (DIL). • Work package example items: • Continue development of DP hardware for Marx and 4+1 supplies. Develop generic family of DP hardware (including chip-level) suitable for integration into various technical systems. • Develop on-board software to integrate DP with IPMI-based relay rack monitoring. Client software will be developed/acquired to provide a uniform management interface to all relay racks based on current standards. Global Design Effort

  15. WP example: RF phase distribution • Perform essential R&D on distribution techniques for the 1300 MHz timing distribution system. • Example work package items: • Investigate & evaluate strategies for phase stabilizing long fiber links modulated at 1.3 GHz. • Demonstrate critical time of arrival stabilization at a dummy Interaction Point using NML beam test facility. • Investigate feasibility of using a beam-derived reference for locking a local phase reference. • Prototype a redundant phase reference receiver with decision logic to auto-switch upon detected failure. Global Design Effort

More Related