1 / 11

BBLA redesign w/ contros

BBLA redesign w/ contros. The Benthic Boundary Layer Array: A Modular, Reconfigurable Seafloor Observatory Node N. Farr, C. Pontbriand, J. Ware, J. Kapit and R. Camilli. GULF OF MEXICO HYDRATES RESEARCH CONSORTIUM ANNUAL MEETING Oct. 26-27, 2010. Re-deployment operations Sept 2010.

kenny
Download Presentation

BBLA redesign w/ contros

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BBLA redesign w/ contros The Benthic Boundary Layer Array: A Modular, Reconfigurable Seafloor Observatory Node N. Farr, C. Pontbriand, J. Ware, J. Kapit and R. Camilli GULF OF MEXICO HYDRATES RESEARCH CONSORTIUM ANNUAL MEETING Oct. 26-27, 2010

  2. Re-deployment operations Sept 2010 Engineering work completed • Integrated Contros methane sensor (power requirement 20W!!) • Recalibrated full suite of sensors • Reconfigured for • multiple power systems, • asynchronous duty cycle, • independent data logging Deployment completed • Deployed September 2010 in SW crater area • Anticipated operational endurance 6-9 months • Data will be compared with 2009 deployment to: • investigate SW crater hydrocarbon expulsion activity • Monitor for overprinting of hydrocarbons from DWH spill

  3. Benthic turbine a low water velocity electric generator for continuous recharging of the BBLA Calculated benthic water column velocity distribution at MC118 (based on nearby MMS data) Operational requirements • High efficiency enabling power generation in low velocity (<0.2 m/s) currents • Light in-air weight to facilitate deployment, near-neutral in water to minimize flotation requirement • Modular design, enabling compact storage on ships pre/post deployment • Safely operate in currents up to 0.5 m/s

  4. Results from trials Tested in well on WHOI dock Begins rotating in 5 cm/s currents Produces ~1 W of power in <0.5 m/s currents ~10 ft dia, 6 ft high and 200 lb in air Components pack flat and turbine is easy to assemble

  5. CORK Optical Telemetry System Wireless data transfer from seafloor instrument to surface vessel Increase power to the CORK for higher bandwidth operation

  6. Sensitive hemispherical receiver 2-inch PMT Wide field of view gathers out-of-plane light. AGC with blanking circuit Dynamic range Ws to 100s-nW Optical Technology High power hemispherical transmitter • 24 commercial LEDs • 6 W avg. optical power

  7. Lowered system mounted on light bar (blue) • CORK system on basket (green) 7

  8. 8

  9. CTD mounted OTS USBL transponder SDSL modem for CTD cable transmission 9

  10. Transects with lowered unit

  11. Measured power-vs-range

More Related