1 / 15

Group 2 Presented By: Josh Balsam, Justin Coe, Curtis Sharkey

Group 2 Presented By: Josh Balsam, Justin Coe, Curtis Sharkey. Overview. Selected a specific lift fan that will work for our design Selected propulsion fans as well as power sources Will use a bullet shaped body We are planning to use a differential sensor to keep the hovercraft on track

keefe-jimenez
Download Presentation

Group 2 Presented By: Josh Balsam, Justin Coe, Curtis Sharkey

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Group 2 • Presented By: • Josh Balsam, Justin Coe, Curtis Sharkey

  2. Overview • Selected a specific lift fan that will work for our design • Selected propulsion fans as well as power sources • Will use a bullet shaped body • We are planning to use a differential sensor to keep the hovercraft on track • Have found sufficient materials for the deck and skirt

  3. Team Status • We have been keeping up with our weekly meetings • Our subgroups have met and decided on what parts and are working on different tasks to contribute to the overall design • We are still uncertain with certain parts of our programming though • For example we are working on how to keep the hovercraft on track/maneuver it so that it does not completely lose the tape.

  4. Introduction • We are currently working on different aspects of the design so that we can first create a hovercraft that floats • Our most pressing issue is acquiring first a sufficient lift fan that can support all the parts • We need to have the lift fan in our possession before we can determine the deck size • The correct size for the axial fans will be determined by how much leeway we have in the hovercrafts weight range, which is set by the power of the lift fan. • The axial fans will just have to run for short increments and shift the craft slightly left or right

  5. Technical Stuff This is the lift fan that we are currently planning to use. We have not yet determined the price but have contacted the manufacturer

  6. Technical cont’d This is a dimensional drawing of our lift fan

  7. Technical Cont’d To the left is a P and Q cure (pressure and flow rate) for the 3 different size fans of this model. We are thinking of using the largest one. Model BCB1012UH is the largest fan and the chart below shows some of its specifications and statistics (very bottom)

  8. Technical Cont’d This is one of the axial fans that our group is considering using for our hovercraft. We will have two fans one on the left and one on the right side of the hovercraft We have not yet determined if they will be placed in the very back or the middle. We will decide after experimenting with our design.

  9. Technical Cont’d This is the dimension drawing for the axial fan

  10. Technical Cont’d The left is the P and Q curve at the rated voltage for the different sizes of this axial fan Below are the specifications for the axial fans. We are looking at the first model, FFB0612HHE

  11. Technical Stuff Cont’d • The base material will be Lexan. • The skirt material will be the inner tube of a tire • We have 2 rechargeable battery packs(9.6 volts each)

  12. Summary • Now that we have begun working on the construction phase we have a better idea of what parts the hovercraft will need. • We have decided specifically which fans we need to accomplish our mission • We have come up with 2 possible arrangements for the axial fans, which provides maneuverability is yet to be determined • We now have a adequate, rechargeable power supply • We know what materials we will use to construct our deck and skirt with

  13. Future Work • Our whole group will continue to meet Wednesday nights at 8:00 and in class as well • The subgroups will continue to meet separately so that they can work on their target specific objectives • Programming: how to write a program to make turns and find/track the line • Skirt and Body: Making a strong, durable, and balanced deck that is leak free sealed to the skirt • Lift and Propulsion: Order all the fans that we need and other necessary parts so that we can start to put the craft together

  14. Credits • Justin Hanacek: Typed up PowerPoint, helped create PowerPoint, determined deck and skirt materials • Josh Balsam: Made CAD designs, helped create PowerPoint, determined deck and skirt materials Presented • Stefan Swan: Helped Create PowerPoint, found the necessary fans • Smita Patel: Helped Create PowerPoint, found necessary fans • Justin Coe: Helped Create PowerPoint, Presented • Kyle Dick: Helped Create PowerPoint • Anakizi Ackla: Helped Create PowerPoint, found the necessary fans • Curtis Sharkey: Helped Create PowerPoint, determined deck and skirt materials, Presented

More Related